Re: [PATCH v14 04/15] xfs: Add delay ready attr remove routines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 24, 2020 at 01:23:24AM -0700, Allison Henderson wrote:
> 
> 
> On 12/23/20 7:16 AM, Brian Foster wrote:
> > On Tue, Dec 22, 2020 at 10:20:16PM -0700, Allison Henderson wrote:
> > > 
> > > 
> > > On 12/22/20 11:44 AM, Brian Foster wrote:
> > > > On Tue, Dec 22, 2020 at 12:20:20PM -0500, Brian Foster wrote:
> > > > > On Tue, Dec 22, 2020 at 12:11:48PM -0500, Brian Foster wrote:
> > > > > > On Fri, Dec 18, 2020 at 12:29:06AM -0700, Allison Henderson wrote:
> > > > > > > This patch modifies the attr remove routines to be delay ready. This
> > > > > > > means they no longer roll or commit transactions, but instead return
> > > > > > > -EAGAIN to have the calling routine roll and refresh the transaction. In
> > > > > > > this series, xfs_attr_remove_args has become xfs_attr_remove_iter, which
> > > > > > > uses a sort of state machine like switch to keep track of where it was
> > > > > > > when EAGAIN was returned. xfs_attr_node_removename has also been
> > > > > > > modified to use the switch, and a new version of xfs_attr_remove_args
> > > > > > > consists of a simple loop to refresh the transaction until the operation
> > > > > > > is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the
> > > > > > > transaction where ever the existing code used to.
> > > > > > > 
> > > > > > > Calls to xfs_attr_rmtval_remove are replaced with the delay ready
> > > > > > > version __xfs_attr_rmtval_remove. We will rename
> > > > > > > __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are
> > > > > > > done.
> > > > > > > 
> > > > > > > xfs_attr_rmtval_remove itself is still in use by the set routines (used
> > > > > > > during a rename).  For reasons of preserving existing function, we
> > > > > > > modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is
> > > > > > > set.  Similar to how xfs_attr_remove_args does here.  Once we transition
> > > > > > > the set routines to be delay ready, xfs_attr_rmtval_remove is no longer
> > > > > > > used and will be removed.
> > > > > > > 
> > > > > > > This patch also adds a new struct xfs_delattr_context, which we will use
> > > > > > > to keep track of the current state of an attribute operation. The new
> > > > > > > xfs_delattr_state enum is used to track various operations that are in
> > > > > > > progress so that we know not to repeat them, and resume where we left
> > > > > > > off before EAGAIN was returned to cycle out the transaction. Other
> > > > > > > members take the place of local variables that need to retain their
> > > > > > > values across multiple function recalls.  See xfs_attr.h for a more
> > > > > > > detailed diagram of the states.
> > > > > > > 
> > > > > > > Signed-off-by: Allison Henderson <allison.henderson@xxxxxxxxxx>
> > > > > > > ---
> > > > > > 
> > > > > > I started with a couple small comments on this patch but inevitably
> > > > > > started thinking more about the factoring again and ended up with a
> > > > > > couple patches on top. The first is more of some small tweaks and
> > > > > > open-coding that IMO makes this patch a bit easier to follow. The
> > > > > > second is more of an RFC so I'll follow up with that in a second email.
> > > > > > I'm curious what folks' thoughts might be on either. Also note that I'm
> > > > > > primarily focusing on code structure and whatnot here, so these are fast
> > > > > > and loose, compile tested only and likely to be broken.
> > > > > > 
> > > > > 
> > > > > ... and here's the second diff (applies on top of the first).
> > > > > 
> > > > > This one popped up after staring at the previous changes for a bit and
> > > > > wondering whether using "done flags" might make the whole thing easier
> > > > > to follow than incremental state transitions. I think the attr remove
> > > > > path is easy enough to follow with either method, but the attr set path
> > > > > is a beast and so this is more with that in mind. Initial thoughts?
> > > > > 
> > > > 
> > > > Eh, the more I stare at the attr set code I'm not sure this by itself is
> > > > much of an improvement. It helps in some areas, but there are so many
> > > > transaction rolls embedded throughout at different levels that a larger
> > > > rework of the code is probably still necessary. Anyways, this was just a
> > > > random thought for now..
> > > > 
> > > > Brian
> > > 
> > > No worries, I know the feeling :-)  The set works and all, but I do think
> > > there is struggle around trying to find a particularly pleasent looking
> > > presentation of it.  Especially when we get into the set path, it's a bit
> > > more complex.  I may pick through the patches you habe here and pick up the
> > > whitespace cleanups and other style adjustments if people prefer it that
> > > way.  The good news is, a lot of the *_args routines are supposed to
> > > disappear at the end of the set, so there's not really a need to invest too
> > > much in them I suppose. It may help to jump to the "Set up infastructure"
> > > patch too.  I've expanded the diagram to try and help illustrait the code
> > > flow a bit, so that may help with following the code flow.
> > > 
> > 
> > I'm sure.. :P Note that the first patch was more smaller tweaks and
> > refactoring with the existing model in mind. For the set path, the
> > challenge IMO is to make the code generally more readable. I think the
> > remove path accomplishes this for the most part because the states and
> > whatnot are fairly low overhead on top of the existing complexity. This
> > changes considerably for the set path, not so much due to the mechanism
> > but because the baseline code is so fragmented and complex from the
> > start. I am slightly concerned that bolting state management onto the
> > current code as such might make it harder to grok and clean up after the
> > fact, but I could be wrong about that (my hope was certainly for the
> > opposite).
> tbh, everytime I do another spin of the set, I actually make all my
> modifications on top of the extended set, with parent pointers and all, and
> make sure all the test cases are still good.  I know pptrs are still pretty
> far out from here, but they're actually the best testcase for this, because
> it generates so much more activity.  If all thats still golden, then I'll
> pull them back down into the lower subsets and work out all the conflicts on
> the back way up.  If something went wrong, diffing the branch heads tracks
> it down pretty fast.
> 

Indeed, that's a good thing. My comment was more around the readability
of the code and subsequent ability to clean it up, reduce the number of
required states, etc...

> > 
> > Regardless, that had me shifting focus a bit and playing around with the
> > current upstream code as opposed to shifting around your code. ISTM that
> > there is some commonality across the various set codepaths and perhaps
> > there is potential to simplify things notably _before_ applying the
> > state management scheme. I've appended a new diff below (based on
> > for-next) that starts to demonstrate what I mean. Note again that this
> > is similarly fast and loose as I've knowingly threw away some quirks of
> > the code (i.e. leaf buffer bhold) for the purpose of quickly trying to
> > explore/POC whether the factoring might be sane and plausible.
> > 
> > In summary, this combines the "try addname" part of each xattr format to
> > fall under a single transaction rolling loop such that I think the
> > resulting function could become one high level state. I ran out of time
> > for working through the rest, but from a read through it seems there's
> > at least a chance we could continue with similar refactoring and
> > reduction to a fewer number of generic states (vs. more format-specific
> > states). For example, the remaining parts of the set operation all seem
> > to have something along the lines of the following high level
> > components:
> > 
> > - remote value block allocation (and value set)
> > - if rename == true, clear flag and done
> > - if rename == false, flip flags
> > 	- remove old xattr (i.e., similar to xattr remove)
> > 
> > ... where much of that code looks remarkably similar across the
> > different leaf/node code branches. So I'm curious what you and others
> > following along might think about something like this as an intermediate
> > step...
> 
> Yes, I had noticed similarities when we first started, though I got the
> impression that people mostly wanted to focus on just hoisting the
> transactions upwards.  I did look at them at one point, but seem to recall
> the similarities having just enough disimilarities such that trying to
> consolodate them tends to introduce about as much plumbing with if/else's.
> In any case, I do think the solution here with the format handling is
> creative, and may reduce a state or two, but I'd really need to see it
> through the test cases to know if it's going to work.  From what you've
> hashed out here, I think I get the idea. It's hard for me to comment on
> readability because I've been up and down the code so much.  I do think it's
> a little loopy looking, but so is the statemachine.  Maybe a good spot for
> others to chime in too.
> 

Can you elaborate on what you mean by loopy? :P I'm sure you noticed I
borrowed the transaction rolling mechanism from your infra patch..

But yeah, I'm partly to blame for the hoisting approach as well. I was
thinking/hoping that seeing the various states would facilitate
simplification of the code, but my first reaction when looking at the
(much more complex) xattr set path is more confusion than clarity. I see
the code drop into state management, using that to call into
format-specific helpers, then fall into doing some other stuff that
might call into some of the same format-specific add helpers, then
realize I'll probably have to trace up and down through the whole path
to make some sense of the execution flow. That is what has me wondering
whether this would become more simple with fewer, generic and higher
level states like SET_FORMAT (i.e. what I hacked up), SET_NAME,
SET_VALUE (rmt block allocs), SET_FLAG (clear or flip), and then finally
fall into the remove path in the rename case.

We'd ultimately implement the same type of state machine approach, it
would just require more up front cleanup rework than the other way
around, and hopefully land fairly simplified from the onset. Of course
those states are just off the top of my head so might not be feasible,
but I'm also curious if any others following along might have thoughts
one way or the other. I'm sure we could implement things in either order
when it comes down to it...

Brian

> I actually find it easier to work on it from the top of the set rather than
> the bottom.  Just so that the end goal of what it will end up looking like
> is a little more clear.  Once the goal is clear, then I worry about layering
> it in what ever patch it goes in.  Otherwise it's harder to see exactly how
> the conflicts shake out.
> 
> Allison
> > 
> > Brian
> > 
> > --- 8< ---
> > 
> > diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
> > index fd8e6418a0d3..eff8833d5303 100644
> > --- a/fs/xfs/libxfs/xfs_attr.c
> > +++ b/fs/xfs/libxfs/xfs_attr.c
> > @@ -58,6 +58,8 @@ STATIC int xfs_attr_node_hasname(xfs_da_args_t *args,
> >   				 struct xfs_da_state **state);
> >   STATIC int xfs_attr_fillstate(xfs_da_state_t *state);
> >   STATIC int xfs_attr_refillstate(xfs_da_state_t *state);
> > +STATIC int xfs_attr_leaf_try_add(struct xfs_da_args *, struct xfs_buf *);
> > +STATIC int xfs_attr_node_addname_work(struct xfs_da_args *);
> >   int
> >   xfs_inode_hasattr(
> > @@ -216,116 +218,93 @@ xfs_attr_is_shortform(
> >   		ip->i_afp->if_nextents == 0);
> >   }
> > -/*
> > - * Attempts to set an attr in shortform, or converts short form to leaf form if
> > - * there is not enough room.  If the attr is set, the transaction is committed
> > - * and set to NULL.
> > - */
> > -STATIC int
> > -xfs_attr_set_shortform(
> > +int
> > +xfs_attr_set_fmt(
> >   	struct xfs_da_args	*args,
> > -	struct xfs_buf		**leaf_bp)
> > +	bool			*done)
> >   {
> >   	struct xfs_inode	*dp = args->dp;
> > -	int			error, error2 = 0;
> > +	struct xfs_buf		*leaf_bp = NULL;
> > +	int			error = 0;
> > -	/*
> > -	 * Try to add the attr to the attribute list in the inode.
> > -	 */
> > -	error = xfs_attr_try_sf_addname(dp, args);
> > -	if (error != -ENOSPC) {
> > -		error2 = xfs_trans_commit(args->trans);
> > -		args->trans = NULL;
> > -		return error ? error : error2;
> > +	if (xfs_attr_is_shortform(dp)) {
> > +		error = xfs_attr_try_sf_addname(dp, args);
> > +		if (!error)
> > +			*done = true;
> > +		if (error != -ENOSPC)
> > +			return error;
> > +
> > +		error = xfs_attr_shortform_to_leaf(args, &leaf_bp);
> > +		if (error)
> > +			return error;
> > +		return -EAGAIN;
> >   	}
> > -	/*
> > -	 * It won't fit in the shortform, transform to a leaf block.  GROT:
> > -	 * another possible req'mt for a double-split btree op.
> > -	 */
> > -	error = xfs_attr_shortform_to_leaf(args, leaf_bp);
> > -	if (error)
> > -		return error;
> > -	/*
> > -	 * Prevent the leaf buffer from being unlocked so that a concurrent AIL
> > -	 * push cannot grab the half-baked leaf buffer and run into problems
> > -	 * with the write verifier. Once we're done rolling the transaction we
> > -	 * can release the hold and add the attr to the leaf.
> > -	 */
> > -	xfs_trans_bhold(args->trans, *leaf_bp);
> > -	error = xfs_defer_finish(&args->trans);
> > -	xfs_trans_bhold_release(args->trans, *leaf_bp);
> > -	if (error) {
> > -		xfs_trans_brelse(args->trans, *leaf_bp);
> > -		return error;
> > +	if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
> > +		struct xfs_buf	*bp = NULL;
> > +
> > +		error = xfs_attr_leaf_try_add(args, bp);
> > +		if (error != -ENOSPC)
> > +			return error;
> > +
> > +		error = xfs_attr3_leaf_to_node(args);
> > +		if (error)
> > +			return error;
> > +		return -EAGAIN;
> >   	}
> > -	return 0;
> > +	return xfs_attr_node_addname(args);
> >   }
> >   /*
> >    * Set the attribute specified in @args.
> >    */
> >   int
> > -xfs_attr_set_args(
> > +__xfs_attr_set_args(
> >   	struct xfs_da_args	*args)
> >   {
> >   	struct xfs_inode	*dp = args->dp;
> > -	struct xfs_buf          *leaf_bp = NULL;
> >   	int			error = 0;
> > -	/*
> > -	 * If the attribute list is already in leaf format, jump straight to
> > -	 * leaf handling.  Otherwise, try to add the attribute to the shortform
> > -	 * list; if there's no room then convert the list to leaf format and try
> > -	 * again.
> > -	 */
> > -	if (xfs_attr_is_shortform(dp)) {
> > -
> > -		/*
> > -		 * If the attr was successfully set in shortform, the
> > -		 * transaction is committed and set to NULL.  Otherwise, is it
> > -		 * converted from shortform to leaf, and the transaction is
> > -		 * retained.
> > -		 */
> > -		error = xfs_attr_set_shortform(args, &leaf_bp);
> > -		if (error || !args->trans)
> > -			return error;
> > -	}
> > -
> >   	if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
> >   		error = xfs_attr_leaf_addname(args);
> > -		if (error != -ENOSPC)
> > -			return error;
> > -
> > -		/*
> > -		 * Promote the attribute list to the Btree format.
> > -		 */
> > -		error = xfs_attr3_leaf_to_node(args);
> >   		if (error)
> >   			return error;
> > +	}
> > +
> > +	error = xfs_attr_node_addname_work(args);
> > +	return error;
> > +}
> > +
> > +int
> > +xfs_attr_set_args(
> > +	struct xfs_da_args	*args)
> > +
> > +{
> > +	int			error;
> > +	bool			done = false;
> > +
> > +	do {
> > +		error = xfs_attr_set_fmt(args, &done);
> > +		if (error != -EAGAIN)
> > +			break;
> > -		/*
> > -		 * Finish any deferred work items and roll the transaction once
> > -		 * more.  The goal here is to call node_addname with the inode
> > -		 * and transaction in the same state (inode locked and joined,
> > -		 * transaction clean) no matter how we got to this step.
> > -		 */
> >   		error = xfs_defer_finish(&args->trans);
> >   		if (error)
> > -			return error;
> > +			break;
> > +		error = xfs_trans_roll_inode(&args->trans, args->dp);
> > +	} while (!error);
> > -		/*
> > -		 * Commit the current trans (including the inode) and
> > -		 * start a new one.
> > -		 */
> > -		error = xfs_trans_roll_inode(&args->trans, dp);
> > -		if (error)
> > -			return error;
> > -	}
> > +	if (error || done)
> > +		return error;
> > -	error = xfs_attr_node_addname(args);
> > -	return error;
> > +	error = xfs_defer_finish(&args->trans);
> > +	if (!error)
> > +		error = xfs_trans_roll_inode(&args->trans, args->dp);
> > +	if (error)
> > +		return error;
> > +
> > +	return __xfs_attr_set_args(args);
> >   }
> >   /*
> > @@ -676,18 +655,6 @@ xfs_attr_leaf_addname(
> >   	trace_xfs_attr_leaf_addname(args);
> > -	error = xfs_attr_leaf_try_add(args, bp);
> > -	if (error)
> > -		return error;
> > -
> > -	/*
> > -	 * Commit the transaction that added the attr name so that
> > -	 * later routines can manage their own transactions.
> > -	 */
> > -	error = xfs_trans_roll_inode(&args->trans, dp);
> > -	if (error)
> > -		return error;
> > -
> >   	/*
> >   	 * If there was an out-of-line value, allocate the blocks we
> >   	 * identified for its storage and copy the value.  This is done
> > @@ -923,7 +890,7 @@ xfs_attr_node_addname(
> >   	 * Fill in bucket of arguments/results/context to carry around.
> >   	 */
> >   	dp = args->dp;
> > -restart:
> > +
> >   	/*
> >   	 * Search to see if name already exists, and get back a pointer
> >   	 * to where it should go.
> > @@ -967,21 +934,10 @@ xfs_attr_node_addname(
> >   			xfs_da_state_free(state);
> >   			state = NULL;
> >   			error = xfs_attr3_leaf_to_node(args);
> > -			if (error)
> > -				goto out;
> > -			error = xfs_defer_finish(&args->trans);
> >   			if (error)
> >   				goto out;
> > -			/*
> > -			 * Commit the node conversion and start the next
> > -			 * trans in the chain.
> > -			 */
> > -			error = xfs_trans_roll_inode(&args->trans, dp);
> > -			if (error)
> > -				goto out;
> > -
> > -			goto restart;
> > +			return -EAGAIN;
> >   		}
> >   		/*
> > @@ -993,9 +949,6 @@ xfs_attr_node_addname(
> >   		error = xfs_da3_split(state);
> >   		if (error)
> >   			goto out;
> > -		error = xfs_defer_finish(&args->trans);
> > -		if (error)
> > -			goto out;
> >   	} else {
> >   		/*
> >   		 * Addition succeeded, update Btree hashvals.
> > @@ -1010,13 +963,23 @@ xfs_attr_node_addname(
> >   	xfs_da_state_free(state);
> >   	state = NULL;
> > -	/*
> > -	 * Commit the leaf addition or btree split and start the next
> > -	 * trans in the chain.
> > -	 */
> > -	error = xfs_trans_roll_inode(&args->trans, dp);
> > +	return 0;
> > +
> > +out:
> > +	if (state)
> > +		xfs_da_state_free(state);
> >   	if (error)
> > -		goto out;
> > +		return error;
> > +	return retval;
> > +}
> > +
> > +STATIC int
> > +xfs_attr_node_addname_work(
> > +	struct xfs_da_args	*args)
> > +{
> > +	struct xfs_da_state	*state;
> > +	struct xfs_da_state_blk	*blk;
> > +	int			retval, error;
> >   	/*
> >   	 * If there was an out-of-line value, allocate the blocks we
> > 
> 




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux