On Thu, Dec 17, 2020 at 06:44:51PM +0100, Donald Buczek wrote: > Dear xfs developer, > > I was doing some testing on a Linux 5.10.1 system with two 100 TB xfs filesystems on md raid6 raids. > > The stress test was essentially `cp -a`ing a Linux source repository with two threads in parallel on each filesystem. > > After about on hour, the processes to one filesystem (md1) blocked, 30 minutes later the process to the other filesystem (md0) did. > > root 7322 2167 0 Dec16 pts/1 00:00:06 cp -a /jbod/M8068/scratch/linux /jbod/M8068/scratch/1/linux.018.TMP > root 7329 2169 0 Dec16 pts/1 00:00:05 cp -a /jbod/M8068/scratch/linux /jbod/M8068/scratch/2/linux.019.TMP > root 13856 2170 0 Dec16 pts/1 00:00:08 cp -a /jbod/M8067/scratch/linux /jbod/M8067/scratch/2/linux.028.TMP > root 13899 2168 0 Dec16 pts/1 00:00:05 cp -a /jbod/M8067/scratch/linux /jbod/M8067/scratch/1/linux.027.TMP > > Some info from the system (all stack traces, slabinfo) is available here: https://owww.molgen.mpg.de/~buczek/2020-12-16.info.txt > > It stands out, that there are many (549 for md0, but only 10 for md1) "xfs-conv" threads all with stacks like this > > [<0>] xfs_log_commit_cil+0x6cc/0x7c0 > [<0>] __xfs_trans_commit+0xab/0x320 > [<0>] xfs_iomap_write_unwritten+0xcb/0x2e0 > [<0>] xfs_end_ioend+0xc6/0x110 > [<0>] xfs_end_io+0xad/0xe0 > [<0>] process_one_work+0x1dd/0x3e0 > [<0>] worker_thread+0x2d/0x3b0 > [<0>] kthread+0x118/0x130 > [<0>] ret_from_fork+0x22/0x30 > > xfs_log_commit_cil+0x6cc is > > xfs_log_commit_cil() > xlog_cil_push_background(log) > xlog_wait(&cil->xc_push_wait, &cil->xc_push_lock); > > Some other threads, including the four "cp" commands are also blocking at xfs_log_commit_cil+0x6cc > > There are also single "flush" process for each md device with this stack signature: > > [<0>] xfs_map_blocks+0xbf/0x400 > [<0>] iomap_do_writepage+0x15e/0x880 > [<0>] write_cache_pages+0x175/0x3f0 > [<0>] iomap_writepages+0x1c/0x40 > [<0>] xfs_vm_writepages+0x59/0x80 > [<0>] do_writepages+0x4b/0xe0 > [<0>] __writeback_single_inode+0x42/0x300 > [<0>] writeback_sb_inodes+0x198/0x3f0 > [<0>] __writeback_inodes_wb+0x5e/0xc0 > [<0>] wb_writeback+0x246/0x2d0 > [<0>] wb_workfn+0x26e/0x490 > [<0>] process_one_work+0x1dd/0x3e0 > [<0>] worker_thread+0x2d/0x3b0 > [<0>] kthread+0x118/0x130 > [<0>] ret_from_fork+0x22/0x30 > > xfs_map_blocks+0xbf is the > > xfs_ilock(ip, XFS_ILOCK_SHARED); > > in xfs_map_blocks(). Can you post the entire dmesg output after running 'echo w > /proc/sysrq-trigger' to dump all the block threads to dmesg? > I have an out of tree driver for the HBA ( smartpqi 2.1.6-005 > pulled from linux-scsi) , but it is unlikely that this blocking is > related to that, because the md block devices itself are > responsive (`xxd /dev/md0` ) My bet is that the OOT driver/hardware had dropped a log IO on the floor - XFS is waiting for the CIL push to complete, and I'm betting that is stuck waiting for iclog IO completion while writing the CIL to the journal. The sysrq output will tell us if this is the case, so that's the first place to look. Cheers, Dave. -- Dave Chinner david@xxxxxxxxxxxxx
