On Fri, Nov 13, 2020 at 04:56:56PM +0530, Chandan Babu R wrote:
> This test verifies that XFS does not cause inode fork's extent count to
> overflow when punching out an extent.
>
> Signed-off-by: Chandan Babu R <chandanrlinux@xxxxxxxxx>
> ---
> tests/xfs/524 | 210 ++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/524.out | 25 ++++++
> tests/xfs/group | 1 +
> 3 files changed, 236 insertions(+)
> create mode 100755 tests/xfs/524
> create mode 100644 tests/xfs/524.out
>
> diff --git a/tests/xfs/524 b/tests/xfs/524
> new file mode 100755
> index 00000000..9e140c99
> --- /dev/null
> +++ b/tests/xfs/524
> @@ -0,0 +1,210 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2020 Chandan Babu R. All Rights Reserved.
> +#
> +# FS QA Test 524
> +#
> +# Verify that XFS does not cause inode fork's extent count to overflow when
> +# punching out an extent.
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/inject
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +_supported_fs xfs
> +_require_scratch
> +_require_xfs_debug
> +_require_xfs_io_command "finsert"
> +_require_xfs_io_command "fcollapse"
> +_require_xfs_io_command "fzero"
For completeness, should this also be testing funshare?
> +_require_test_program "punch-alternating"
> +_require_xfs_io_error_injection "reduce_max_iextents"
> +
> +punch_range()
> +{
> + echo "* Fpunch regular file"
> +
> + echo "Format and mount fs"
> + _scratch_mkfs >> $seqres.full
> + _scratch_mount >> $seqres.full
I don't think you need a fresh format for each functional test.
> +
> + testfile=$SCRATCH_MNT/testfile
> + bsize=$(_get_block_size $SCRATCH_MNT)
> +
> + nr_blks=30
> +
> + echo "Create \$testfile"
> + xfs_io -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \
> + -c sync $testfile >> $seqres.full
> +
> + echo "Inject reduce_max_iextents error tag"
> + xfs_io -x -c 'inject reduce_max_iextents' $SCRATCH_MNT
> +
> + echo "fpunch alternating blocks"
> + $here/src/punch-alternating $testfile >> $seqres.full 2>&1
> +
> + testino=$(stat -c "%i" $testfile)
> +
> + _scratch_unmount >> $seqres.full
> +
> + echo "Verify \$testfile's extent count"
> +
> + nextents=$(_scratch_get_iext_count $testino data ||
...and now that I keep seeing this unmount-getiextcount-mount dance, you
probably should convert these to grab the extent count info online.
--D
> + _fail "Unable to obtain inode fork's extent count")
> + if (( $nextents > 10 )); then
> + echo "Extent count overflow check failed: nextents = $nextents"
> + exit 1
> + fi
> +}
> +
> +finsert_range()
> +{
> + echo "* Finsert regular file"
> +
> + echo "Format and mount fs"
> + _scratch_mkfs >> $seqres.full
> + _scratch_mount >> $seqres.full
> +
> + testfile=$SCRATCH_MNT/testfile
> + bsize=$(_get_block_size $SCRATCH_MNT)
> +
> + nr_blks=30
> +
> + echo "Create \$testfile"
> + xfs_io -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \
> + -c sync $testfile >> $seqres.full
> +
> + echo "Inject reduce_max_iextents error tag"
> + xfs_io -x -c 'inject reduce_max_iextents' $SCRATCH_MNT
> +
> + echo "Finsert at every other block offset"
> + for i in $(seq 1 2 $((nr_blks - 1))); do
> + xfs_io -f -c "finsert $((i * bsize)) $bsize" $testfile \
> + >> $seqres.full 2>&1
> + [[ $? != 0 ]] && break
> + done
> +
> + testino=$(stat -c "%i" $testfile)
> +
> + _scratch_unmount >> $seqres.full
> +
> + echo "Verify \$testfile's extent count"
> +
> + nextents=$(_scratch_get_iext_count $testino data || \
> + _fail "Unable to obtain inode fork's extent count")
> + if (( $nextents > 10 )); then
> + echo "Extent count overflow check failed: nextents = ${nextents}"
> + exit 1
> + fi
> +}
> +
> +fcollapse_range()
> +{
> + echo "* Fcollapse regular file"
> +
> + echo "Format and mount fs"
> + _scratch_mkfs >> $seqres.full
> + _scratch_mount >> $seqres.full
> +
> + testfile=$SCRATCH_MNT/testfile
> + bsize=$(_get_block_size $SCRATCH_MNT)
> +
> + nr_blks=30
> +
> + echo "Create \$testfile"
> + xfs_io -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \
> + -c sync $testfile >> $seqres.full
> +
> + echo "Inject reduce_max_iextents error tag"
> + xfs_io -x -c 'inject reduce_max_iextents' $SCRATCH_MNT
> +
> + echo "Fcollapse at every other block offset"
> + for i in $(seq 1 $((nr_blks / 2 - 1))); do
> + xfs_io -f -c "fcollapse $((i * bsize)) $bsize" $testfile \
> + >> $seqres.full 2>&1
> + [[ $? != 0 ]] && break
> + done
> +
> + testino=$(stat -c "%i" $testfile)
> +
> + _scratch_unmount >> $seqres.full
> +
> + echo "Verify \$testfile's extent count"
> +
> + nextents=$(_scratch_get_iext_count $testino data || \
> + _fail "Unable to obtain inode fork's extent count")
> + if (( $nextents > 10 )); then
> + echo "Extent count overflow check failed: nextents = ${nextents}"
> + exit 1
> + fi
> +}
> +
> +fzero_range()
> +{
> + echo "* Fzero regular file"
> +
> + echo "Format and mount fs"
> + _scratch_mkfs >> $seqres.full
> + _scratch_mount >> $seqres.full
> +
> + testfile=$SCRATCH_MNT/testfile
> + bsize=$(_get_block_size $SCRATCH_MNT)
> +
> + nr_blks=30
> +
> + echo "Create \$testfile"
> + xfs_io -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \
> + -c sync $testfile >> $seqres.full
> +
> + echo "Inject reduce_max_iextents error tag"
> + xfs_io -x -c 'inject reduce_max_iextents' $SCRATCH_MNT
> +
> + echo "Fzero at every other block offset"
> + for i in $(seq 1 2 $((nr_blks - 1))); do
> + xfs_io -f -c "fzero $((i * bsize)) $bsize" $testfile \
> + >> $seqres.full 2>&1
> + [[ $? != 0 ]] && break
> + done
> +
> + testino=$(stat -c "%i" $testfile)
> +
> + _scratch_unmount >> $seqres.full
> +
> + echo "Verify \$testfile's extent count"
> +
> + nextents=$(_scratch_get_iext_count $testino data || \
> + _fail "Unable to obtain inode fork's extent count")
> + if (( $nextents > 10 )); then
> + echo "Extent count overflow check failed: nextents = ${nextents}"
> + exit 1
> + fi
> +}
> +
> +punch_range
> +finsert_range
> +fcollapse_range
> +fzero_range
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/524.out b/tests/xfs/524.out
> new file mode 100644
> index 00000000..58f7d7ae
> --- /dev/null
> +++ b/tests/xfs/524.out
> @@ -0,0 +1,25 @@
> +QA output created by 524
> +* Fpunch regular file
> +Format and mount fs
> +Create $testfile
> +Inject reduce_max_iextents error tag
> +fpunch alternating blocks
> +Verify $testfile's extent count
> +* Finsert regular file
> +Format and mount fs
> +Create $testfile
> +Inject reduce_max_iextents error tag
> +Finsert at every other block offset
> +Verify $testfile's extent count
> +* Fcollapse regular file
> +Format and mount fs
> +Create $testfile
> +Inject reduce_max_iextents error tag
> +Fcollapse at every other block offset
> +Verify $testfile's extent count
> +* Fzero regular file
> +Format and mount fs
> +Create $testfile
> +Inject reduce_max_iextents error tag
> +Fzero at every other block offset
> +Verify $testfile's extent count
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 018c70ef..3fa38c36 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -521,3 +521,4 @@
> 521 auto quick realtime growfs
> 522 auto quick quota
> 523 auto quick realtime growfs
> +524 auto quick punch zero insert collapse
> --
> 2.28.0
>
