On 7/9/20 11:04 AM, Darrick J. Wong wrote:
On Thu, Jul 09, 2020 at 09:24:56AM -0400, Brian Foster wrote:On Thu, Jun 25, 2020 at 04:30:16PM -0700, Allison Collins wrote:This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args has become xfs_attr_remove_iter, which uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. xfs_attr_node_removename has also been modified to use the switch, and a new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of perserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function recalls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Collins <allison.henderson@xxxxxxxxxx> --- fs/xfs/libxfs/xfs_attr.c | 155 ++++++++++++++++++++++++++++++---------- fs/xfs/libxfs/xfs_attr.h | 73 +++++++++++++++++++ fs/xfs/libxfs/xfs_attr_leaf.c | 2 +- fs/xfs/libxfs/xfs_attr_remote.c | 40 +++++------ fs/xfs/libxfs/xfs_attr_remote.h | 2 +- fs/xfs/xfs_attr_inactive.c | 2 +- 6 files changed, 208 insertions(+), 66 deletions(-) diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c index 4b78c86..5c460f4 100644 --- a/fs/xfs/libxfs/xfs_attr.c +++ b/fs/xfs/libxfs/xfs_attr.c @@ -53,7 +53,7 @@ STATIC int xfs_attr_leaf_hasname(struct xfs_da_args *args, struct xfs_buf **bp); */ STATIC int xfs_attr_node_get(xfs_da_args_t *args); STATIC int xfs_attr_node_addname(xfs_da_args_t *args); -STATIC int xfs_attr_node_removename(xfs_da_args_t *args); +STATIC int xfs_attr_node_removename(struct xfs_delattr_context *dac); STATIC int xfs_attr_node_hasname(xfs_da_args_t *args, struct xfs_da_state **state); STATIC int xfs_attr_fillstate(xfs_da_state_t *state); @@ -264,6 +264,32 @@ xfs_attr_set_shortform( }/*+ * Checks to see if a delayed attribute transaction should be rolled. If so, + * also checks for a defer finish. Transaction is finished and rolled as + * needed, and returns true of false if the delayed operation should continue. + */ +bool +xfs_attr_roll_again(The function name suggests this is more of a status checking function than one that does actual work. I'd suggest something more like xfs_attr_trans_roll() based on the implementation.+ struct xfs_delattr_context *dac, + int *error) +{ + struct xfs_da_args *args = dac->da_args; + + if (*error != -EAGAIN) + return false; + + if (dac->flags & XFS_DAC_DEFER_FINISH) { + dac->flags &= ~XFS_DAC_DEFER_FINISH; + *error = xfs_defer_finish(&args->trans); + if (*error) + return false; + } +I also find the semantics of this function a little confusing. How would a caller distinguish between error == -EAGAIN as passed in from the caller vs. error being set by one of the transaction processing calls?Do any of them do that?+ *error = xfs_trans_roll_inode(&args->trans, args->dp);I keep wondering why it's necessary to call xfs_defer_finish immediately followed by xfs_trans_roll_inode. Maybe we've already resolved this question, but if we did I don't remember the answer, and the answer should be captured as a comment because I never remember. :P Oh right, we /did/ resolve this question. The defer_finish exists to finish all the deferred ops so that we return to the caller with a fresh transaction and no dfops. Comment, please... if (dac->flags & XFS_DAC_DEFER_FINISH) { /* * The caller wants us to finish all the deferred ops so * that we avoid pinning the log tail with a large * number of deferred ops. */
Sure, will add.
Mostly I think it was just because people wanted this to be a straight hoist as much as possible. Reason being that the calling functions roll the transaction whether or not the helpers call defer finish, so this would be about equivalent.dac->flags &= ~XFS_DAC_DEFER_FINISH; *error = xfs_defer_finish(&args->trans); if (*error) return false; } Oh, another question: if we joined the inode to the transaction with ilockflags == 0 (i.e. the transaction does not automatically unlock the inode) then why do we need the separate _trans_roll_inode call? Won't the _defer_finish call return with the inode joined to a clean transaction? (Or did we resolve this question already as well, and all we need is a comment to remind your forgetful maintainer?)
In the case of the remove path, we probably could get away with skipping the roll if we call defer finish, but then later when we call this from the set routines, I think there's a race with the AIL such that we need to roll the transaction and then join the leaf to the new transaction. So then you'd need to hoist the roll back out, or plumb a flag in to roll anyway, but I think that would make the semantics even more goofy. I sort of get the impression that trying to stick to a "refactor only" goal helps people to be a little more comfortable with the changes :-)
Allison
--D+ return *error == 0; +} + +/* * Set the attribute specified in @args. */ int @@ -364,23 +390,47 @@ xfs_has_attr( */ int xfs_attr_remove_args( - struct xfs_da_args *args) + struct xfs_da_args *args) { - struct xfs_inode *dp = args->dp; - int error; + int error = 0; + struct xfs_delattr_context dac = { + .da_args = args, + }; + + do { + error = xfs_attr_remove_iter(&dac); + } while (xfs_attr_roll_again(&dac, &error)); + + return error; +} + +/* + * Remove the attribute specified in @args. + * + * This function may return -EAGAIN to signal that the transaction needs to be + * rolled. Callers should continue calling this function until they receive a + * return value other than -EAGAIN. + */ +int +xfs_attr_remove_iter( + struct xfs_delattr_context *dac) +{ + struct xfs_da_args *args = dac->da_args; + struct xfs_inode *dp = args->dp; + + if (dac->dela_state == XFS_DAS_RM_SHRINK) + goto node;Thoughts on my comments on this on the previous version?if (!xfs_inode_hasattr(dp)) {- error = -ENOATTR; + return -ENOATTR; } else if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL) { ASSERT(dp->i_afp->if_flags & XFS_IFINLINE); - error = xfs_attr_shortform_remove(args); + return xfs_attr_shortform_remove(args); } else if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { - error = xfs_attr_leaf_removename(args); - } else { - error = xfs_attr_node_removename(args); + return xfs_attr_leaf_removename(args); } - - return error; +node: + return xfs_attr_node_removename(dac); }/*...@@ -1268,17 +1348,14 @@ xfs_attr_node_removename( error = xfs_da3_join(state); if (error) goto out; - error = xfs_defer_finish(&args->trans); - if (error) - goto out; - /* - * Commit the Btree join operation and start a new trans. - */ - error = xfs_trans_roll_inode(&args->trans, dp); - if (error) - goto out; + + dac->flags |= XFS_DAC_DEFER_FINISH; + dac->dela_state = XFS_DAS_RM_SHRINK; + return -EAGAIN; }+das_rm_shrink:+I think I also mentioned the tail of this function might sit better in the caller.. Brian/* * If the result is small enough, push it all into the inode. */ diff --git a/fs/xfs/libxfs/xfs_attr.h b/fs/xfs/libxfs/xfs_attr.h index 3e97a93..6c58792 100644 --- a/fs/xfs/libxfs/xfs_attr.h +++ b/fs/xfs/libxfs/xfs_attr.h @@ -74,6 +74,75 @@ struct xfs_attr_list_context { };+/*+ * ======================================================================== + * Structure used to pass context around among the delayed routines. + * ======================================================================== + */ + +/* + * Below is a state machine diagram for attr remove operations. The XFS_DAS_* + * states indicate places where the function would return -EAGAIN, and then + * immediately resume from after being recalled by the calling function. States + * marked as a "subroutine state" indicate that they belong to a subroutine, and + * so the calling function needs to pass them back to that subroutine to allow + * it to finish where it left off. But they otherwise do not have a role in the + * calling function other than just passing through. + * + * xfs_attr_remove_iter() + * XFS_DAS_RM_SHRINK ─┐ + * (subroutine state) │ + * └─>xfs_attr_node_removename() + * │ + * v + * need to + * shrink tree? ─n─┐ + * │ │ + * y │ + * │ │ + * v │ + * XFS_DAS_RM_SHRINK │ + * │ │ + * v │ + * done <─────┘ + * + */ + +/* + * Enum values for xfs_delattr_context.da_state + * + * These values are used by delayed attribute operations to keep track of where + * they were before they returned -EAGAIN. A return code of -EAGAIN signals the + * calling function to roll the transaction, and then recall the subroutine to + * finish the operation. The enum is then used by the subroutine to jump back + * to where it was and resume executing where it left off. + */ +enum xfs_delattr_state { + /* Zero is uninitalized */ + XFS_DAS_RM_SHRINK = 1, /* We are shrinking the tree */ +}; + +/* + * Defines for xfs_delattr_context.flags + */ +#define XFS_DAC_DEFER_FINISH 0x01 /* finish the transaction */ +#define XFS_DAC_NODE_RMVNAME_INIT 0x02 /* xfs_attr_node_removename init */ + +/* + * Context used for keeping track of delayed attribute operations + */ +struct xfs_delattr_context { + struct xfs_da_args *da_args; + + /* Used in xfs_attr_node_removename to roll through removing blocks */ + struct xfs_da_state *da_state; + struct xfs_da_state_blk *blk; + + /* Used to keep track of current state of delayed operation */ + unsigned int flags; + enum xfs_delattr_state dela_state; +}; + /*======================================================================== * Function prototypes for the kernel. *========================================================================*/ @@ -91,6 +160,10 @@ int xfs_attr_set(struct xfs_da_args *args); int xfs_attr_set_args(struct xfs_da_args *args); int xfs_has_attr(struct xfs_da_args *args); int xfs_attr_remove_args(struct xfs_da_args *args); +int xfs_attr_remove_iter(struct xfs_delattr_context *dac); +bool xfs_attr_roll_again(struct xfs_delattr_context *dac, int *error); bool xfs_attr_namecheck(const void *name, size_t length); +void xfs_delattr_context_init(struct xfs_delattr_context *dac, + struct xfs_da_args *args);#endif /* __XFS_ATTR_H__ */diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index 351351c..20521bf 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -19,8 +19,8 @@ #include "xfs_bmap_btree.h" #include "xfs_bmap.h" #include "xfs_attr_sf.h" -#include "xfs_attr_remote.h" #include "xfs_attr.h" +#include "xfs_attr_remote.h" #include "xfs_attr_leaf.h" #include "xfs_error.h" #include "xfs_trace.h" diff --git a/fs/xfs/libxfs/xfs_attr_remote.c b/fs/xfs/libxfs/xfs_attr_remote.c index 85dca51..20e4605 100644 --- a/fs/xfs/libxfs/xfs_attr_remote.c +++ b/fs/xfs/libxfs/xfs_attr_remote.c @@ -676,12 +676,14 @@ xfs_attr_rmtval_invalidate( */ int xfs_attr_rmtval_remove( - struct xfs_da_args *args) + struct xfs_da_args *args) { - xfs_dablk_t lblkno; - int blkcnt; - int error = 0; - int retval = 0; + xfs_dablk_t lblkno; + int blkcnt; + int error = 0; + struct xfs_delattr_context dac = { + .da_args = args, + };trace_xfs_attr_rmtval_remove(args); @@ -691,19 +693,10 @@ xfs_attr_rmtval_remove(lblkno = args->rmtblkno; blkcnt = args->rmtblkcnt; do { - retval = __xfs_attr_rmtval_remove(args); - if (retval && retval != EAGAIN) - return retval; - - /* - * Close out trans and start the next one in the chain. - */ - error = xfs_trans_roll_inode(&args->trans, args->dp); - if (error) - return error; - } while (retval == -EAGAIN); + error = __xfs_attr_rmtval_remove(&dac); + } while (xfs_attr_roll_again(&dac, &error));- return 0;+ return error; }/*@@ -713,9 +706,10 @@ xfs_attr_rmtval_remove( */ int __xfs_attr_rmtval_remove( - struct xfs_da_args *args) + struct xfs_delattr_context *dac) { - int error, done; + struct xfs_da_args *args = dac->da_args; + int error, done;/** Unmap value blocks for this attr. @@ -725,12 +719,10 @@ __xfs_attr_rmtval_remove( if (error) return error;- error = xfs_defer_finish(&args->trans);- if (error) - return error; - - if (!done) + if (!done) { + dac->flags |= XFS_DAC_DEFER_FINISH; return -EAGAIN; + }return error;} diff --git a/fs/xfs/libxfs/xfs_attr_remote.h b/fs/xfs/libxfs/xfs_attr_remote.h index 9eee615..002fd30 100644 --- a/fs/xfs/libxfs/xfs_attr_remote.h +++ b/fs/xfs/libxfs/xfs_attr_remote.h @@ -14,5 +14,5 @@ int xfs_attr_rmtval_remove(struct xfs_da_args *args); int xfs_attr_rmtval_stale(struct xfs_inode *ip, struct xfs_bmbt_irec *map, xfs_buf_flags_t incore_flags); int xfs_attr_rmtval_invalidate(struct xfs_da_args *args); -int __xfs_attr_rmtval_remove(struct xfs_da_args *args); +int __xfs_attr_rmtval_remove(struct xfs_delattr_context *dac); #endif /* __XFS_ATTR_REMOTE_H__ */ diff --git a/fs/xfs/xfs_attr_inactive.c b/fs/xfs/xfs_attr_inactive.c index bfad669..aaa7e66 100644 --- a/fs/xfs/xfs_attr_inactive.c +++ b/fs/xfs/xfs_attr_inactive.c @@ -15,10 +15,10 @@ #include "xfs_da_format.h" #include "xfs_da_btree.h" #include "xfs_inode.h" +#include "xfs_attr.h" #include "xfs_attr_remote.h" #include "xfs_trans.h" #include "xfs_bmap.h" -#include "xfs_attr.h" #include "xfs_attr_leaf.h" #include "xfs_quota.h" #include "xfs_dir2.h" -- 2.7.4
