Hi folks, Inode flushing requires that we first lock an inode, then check it, then lock the underlying buffer, flush the inode to the buffer and finally add the inode to the buffer to be unlocked on IO completion. We then walk all the other cached inodes in the buffer range and optimistically lock and flush them to the buffer without blocking. This cluster write effectively repeats the same code we do with the initial inode, except now it has to special case that initial inode that is already locked. Hence we have multiple copies of very similar code, and it is a result of inode cluster flushing being based on a specific inode rather than grabbing the buffer and flushing all available inodes to it. The problem with this at the moment is that we we can't look up the buffer until we have guaranteed that an inode is held exclusively and it's not going away while we get the buffer through an imap lookup. Hence we are kinda stuck locking an inode before we can look up the buffer. This is also a result of inodes being detached from the cluster buffer except when IO is being done. This has the further problem that the cluster buffer can be reclaimed from memory and then the inode can be dirtied. At this point cleaning the inode requires a read-modify-write cycle on the cluster buffer. If we then are put under memory pressure, cleaning that dirty inode to reclaim it requires allocating memory for the cluster buffer and this leads to all sorts of problems. We used synchronous inode writeback in reclaim as a throttle that provided a forwards progress mechanism when RMW cycles were required to clean inodes. Async writeback of inodes (e.g. via the AIL) would immediately exhaust remaining memory reserves trying to allocate inode cluster after inode cluster. The synchronous writeback of an inode cluster allowed reclaim to release the inode cluster and have it freed almost immediately which could then be used to allocate the next inode cluster buffer. Hence the IO based throttling mechanism largely guaranteed forwards progress in inode reclaim. By removing the requirement for require memory allocation for inode writeback filesystem level, we can issue writeback asynchrnously and not have to worry about the memory exhaustion anymore. Another issue is that if we have slow disks, we can build up dirty inodes in memory that can then take hours for an operation like unmount to flush. A RMW cycle per inode on a slow RAID6 device can mean we only clean 50 inodes a second, and when there are hundreds of thousands of dirty inodes that need to be cleaned this can take a long time. PInning the cluster buffers will greatly speed up inode writeback on slow storage systems like this. These limitations all stem from the same source: inode writeback is inode centric, And they are largely solved by the same architectural change: make inode writeback cluster buffer centric. This series is makes that architectural change. Firstly, we start by pinning the inode backing buffer in memory when an inode is marked dirty (i.e. when it is logged). By tracking the number of dirty inodes on a buffer as a counter rather than a flag, we avoid the problem of overlapping inode dirtying and buffer flushing racing to set/clear the dirty flag. Hence as long as there is a dirty inode in memory, the buffer will not be able to be reclaimed. We can safely do this inode cluster buffer lookup when we dirty an inode as we do not hold the buffer locked - we merely take a reference to it and then release it - and hence we don't cause any new lock order issues. When the inode is finally cleaned, the reference to the buffer can be removed from the inode log item and the buffer released. This is done from the inode completion callbacks that are attached to the buffer when the inode is flushed. Pinning the cluster buffer in this way immediately avoids the RMW problem in inode writeback and reclaim contexts by moving the memory allocation and the blocking buffer read into the transaction context that dirties the inode. This inverts our dirty inode throttling mechanism - we now throttle the rate at which we can dirty inodes to rate at which we can allocate memory and read inode cluster buffers into memory rather than via throttling reclaim to rate at which we can clean dirty inodes. Hence if we are under memory pressure, we'll block on memory allocation when trying to dirty the referenced inode, rather than in the memory reclaim path where we are trying to clean unreferenced inodes to free memory. Hence we no longer have to guarantee forwards progress in inode reclaim as we aren't doing memory allocation, and that means we can remove inode writeback from the XFS inode shrinker completely without changing the system tolerance for low memory operation. Tracking the buffers via the inode log item also allows us to completely rework the inode flushing mechanism. While the inode log item is in the AIL, it is safe for the AIL to access any member of the log item. Hence the AIL push mechanisms can access the buffer attached to the inode without first having to lock the inode. This means we can essentially lock the buffer directly and then call xfs_iflush_cluster() without first going through xfs_iflush() to find the buffer. Hence we can remove xfs_iflush() altogether, because the two places that call it - the inode item push code and inode reclaim - no longer need to flush inodes directly. This can be further optimised by attaching the inode to the cluster buffer when the inode is dirtied. i.e. when we add the buffer reference to the inode log item, we also attach the inode to the buffer for IO processing. This leads to the dirty inodes always being attached to the buffer and hence we no longer need to add them when we flush the inode and remove them when IO completes. Instead the inodes are attached when the node log item is dirtied, and removed when the inode log item is cleaned. With this structure in place, we no longer need to do lookups to find the dirty inodes in the cache to attach to the buffer in xfs_iflush_cluster() - they are already attached to the buffer. Hence when the AIL pushes an inode, we just grab the buffer from the log item, and then walk the buffer log item list to lock and flush the dirty inodes attached to the buffer. This greatly simplifies inode writeback, and removes another memory allocation from the inode writeback path (the array used for the radix tree gang lookup). And while the radix tree lookups are fast, walking the linked list of dirty inodes is faster. There is followup work I am doing that uses the inode cluster buffer as a replacement in the AIL for tracking dirty inodes. This part of the series is not ready yet as it has some intricate locking requirements. That is an optimisation, so I've left that out because solving the inode reclaim blocking problems is the important part of this work. In short, this series simplifies inode writeback and fixes the long standing inode reclaim blocking issues without requiring any changes to the memory reclaim infrastructure. Note: dquots should probably be converted to cluster flushing in a similar way, as they have many of the same issues as inode flushing. Thoughts, comments and improvemnts welcome. -Dave. Version 3 git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git xfs-async-inode-reclaim-3 - rebase on 5.7 + for-next - update comments (p3) - update commit message (p4) - renamed xfs_buf_ioerror_sync() (p13) - added enum for return value from xfs_buf_iodone_error() (p13) - moved clearing of buffer error to iodone functions (p13) - whitespace (p13) - rebase p14 (p13 conflicts) - rebase p16 (p13 conflicts) - removed a superfluous assert (p16) - moved comment and check in xfs_iflush_done() from p16 to p25 - rebase p25 (p16 conflicts) Version 2 git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git xfs-async-inode-reclaim-2 - describe ili_lock better (p2) - clean up inode logging code some more (p2) - move "early read completion" for xfs_buf_ioend() up into p3 from p4. - fixed conflicts in p4 due to p3 changes. - fixed conflicts in p5 due to p4 changes. - s/_XBF_LOGRCVY/_XBF_LOG_RECOVERY/ (p5) - renamed the buf log item iodone callback to xfs_buf_item_iodone and reused the xfs_buf_iodone() name for the catch-all buffer write iodone completion. (p6) - history update for commit message (p7) - subject update for p8 - rework loop in xfs_dquot_done() (p9) - Fixed conflicts in p10 due to p6 changes - got rid of entire comments around li_cb (p11) - new patch to rework buffer io error callbacks - new patch to unwind ->iop_error calls and remove ->iop_error - new patch to lift xfs_clear_li_failed() out of xfs_ail_delete_one() - rebased p12 on all the prior changes - reworked LI_FAILED handling when pinning inodes to the cluster buffer (p12) - fixed comment about holding buffer references in xfs_trans_log_inode() (p12) - fixed indenting of xfs_iflush_abort() (p12) - added comments explaining "skipped" indoe reclaim return value (p14) - cleaned up error return stack in xfs_reclaim_inode() (p14) - cleaned up skipped return in xfs_reclaim_inodes() (p14) - fixed bug where skipped wasn't incremented if reclaim cursor was not zero. This could leave inodes between the start of the AG and the cursor unreclaimed (p15) - reinstate the patch removing SYNC_WAIT from xfs_reclaim_inodes(). Exposed "skipped" bug in p15. - cleaned up inode reclaim comments (p18) - split p19 into two - one to change xfs_ifree_cluster(), one for the buffer pinning. - xfs_ifree_mark_inode_stale() now takes the cluster buffer and we get the perag from that rather than having to do a lookup in xfs_ifree_cluster(). - moved extra IO reference for xfs_iflush_cluster() from AIL pushing to initial xfs_iflush_cluster rework (p22 -> p20) - fixed static declaration on xfs_iflush() (p22) - fixed incorrect EIO return from xfs_iflush_cluster() - rebase p23 because it all rejects now. - fix INODE_ITEM() usage in p23 - removed long lines from commit message in p24 - new patch to fix logging of XFS_ISTALE inodes which pushes dirty inodes through reclaim. Dave Chinner (30): xfs: Don't allow logging of XFS_ISTALE inodes xfs: remove logged flag from inode log item xfs: add an inode item lock xfs: mark inode buffers in cache xfs: mark dquot buffers in cache xfs: mark log recovery buffers for completion xfs: call xfs_buf_iodone directly xfs: clean up whacky buffer log item list reinit xfs: make inode IO completion buffer centric xfs: use direct calls for dquot IO completion xfs: clean up the buffer iodone callback functions xfs: get rid of log item callbacks xfs: handle buffer log item IO errors directly xfs: unwind log item error flagging xfs: move xfs_clear_li_failed out of xfs_ail_delete_one() xfs: pin inode backing buffer to the inode log item xfs: make inode reclaim almost non-blocking xfs: remove IO submission from xfs_reclaim_inode() xfs: allow multiple reclaimers per AG xfs: don't block inode reclaim on the ILOCK xfs: remove SYNC_TRYLOCK from inode reclaim xfs: remove SYNC_WAIT from xfs_reclaim_inodes() xfs: clean up inode reclaim comments xfs: rework stale inodes in xfs_ifree_cluster xfs: attach inodes to the cluster buffer when dirtied xfs: xfs_iflush() is no longer necessary xfs: rename xfs_iflush_int() xfs: rework xfs_iflush_cluster() dirty inode iteration xfs: factor xfs_iflush_done xfs: remove xfs_inobp_check() fs/xfs/libxfs/xfs_inode_buf.c | 27 +- fs/xfs/libxfs/xfs_inode_buf.h | 6 - fs/xfs/libxfs/xfs_trans_inode.c | 110 +++++-- fs/xfs/xfs_buf.c | 40 ++- fs/xfs/xfs_buf.h | 48 +-- fs/xfs/xfs_buf_item.c | 420 ++++++++++++------------ fs/xfs/xfs_buf_item.h | 8 +- fs/xfs/xfs_buf_item_recover.c | 5 +- fs/xfs/xfs_dquot.c | 29 +- fs/xfs/xfs_dquot.h | 1 + fs/xfs/xfs_dquot_item.c | 18 -- fs/xfs/xfs_dquot_item_recover.c | 2 +- fs/xfs/xfs_file.c | 9 +- fs/xfs/xfs_icache.c | 333 ++++++------------- fs/xfs/xfs_icache.h | 2 +- fs/xfs/xfs_inode.c | 554 ++++++++++++-------------------- fs/xfs/xfs_inode.h | 2 +- fs/xfs/xfs_inode_item.c | 301 +++++++++-------- fs/xfs/xfs_inode_item.h | 24 +- fs/xfs/xfs_inode_item_recover.c | 2 +- fs/xfs/xfs_log_recover.c | 5 +- fs/xfs/xfs_mount.c | 15 +- fs/xfs/xfs_mount.h | 1 - fs/xfs/xfs_super.c | 3 - fs/xfs/xfs_trans.h | 5 - fs/xfs/xfs_trans_ail.c | 10 +- fs/xfs/xfs_trans_buf.c | 15 +- 27 files changed, 881 insertions(+), 1114 deletions(-) -- 2.26.2.761.g0e0b3e54be
