There is not much point in the xfs_iread function, as it has a single
caller and not a whole lot of code. Move it into the only caller,
and trim down the overdocumentation to just documenting the important
"why" instead of a lot of redundant "what".
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
fs/xfs/libxfs/xfs_inode_buf.c | 73 -----------------------------------
fs/xfs/libxfs/xfs_inode_buf.h | 2 -
fs/xfs/xfs_icache.c | 33 +++++++++++++++-
3 files changed, 32 insertions(+), 76 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c
index 0357dc4b29481..698314d078b8a 100644
--- a/fs/xfs/libxfs/xfs_inode_buf.c
+++ b/fs/xfs/libxfs/xfs_inode_buf.c
@@ -624,79 +624,6 @@ xfs_dinode_calc_crc(
dip->di_crc = xfs_end_cksum(crc);
}
-/*
- * Read the disk inode attributes into the in-core inode structure.
- *
- * For version 5 superblocks, if we are initialising a new inode and we are not
- * utilising the XFS_MOUNT_IKEEP inode cluster mode, we can simple build the new
- * inode core with a random generation number. If we are keeping inodes around,
- * we need to read the inode cluster to get the existing generation number off
- * disk. Further, if we are using version 4 superblocks (i.e. v1/v2 inode
- * format) then log recovery is dependent on the di_flushiter field being
- * initialised from the current on-disk value and hence we must also read the
- * inode off disk.
- */
-int
-xfs_iread(
- xfs_mount_t *mp,
- xfs_trans_t *tp,
- xfs_inode_t *ip,
- uint iget_flags)
-{
- xfs_buf_t *bp;
- xfs_dinode_t *dip;
- int error;
-
- /*
- * Fill in the location information in the in-core inode.
- */
- error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, iget_flags);
- if (error)
- return error;
-
- /* shortcut IO on inode allocation if possible */
- if ((iget_flags & XFS_IGET_CREATE) &&
- xfs_sb_version_has_v3inode(&mp->m_sb) &&
- !(mp->m_flags & XFS_MOUNT_IKEEP)) {
- VFS_I(ip)->i_generation = prandom_u32();
- return 0;
- }
-
- /*
- * Get pointers to the on-disk inode and the buffer containing it.
- */
- error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0, iget_flags);
- if (error)
- return error;
-
- error = xfs_inode_from_disk(ip, dip);
- if (error)
- goto out_brelse;
-
- /*
- * Mark the buffer containing the inode as something to keep
- * around for a while. This helps to keep recently accessed
- * meta-data in-core longer.
- */
- xfs_buf_set_ref(bp, XFS_INO_REF);
-
- /*
- * Use xfs_trans_brelse() to release the buffer containing the on-disk
- * inode, because it was acquired with xfs_trans_read_buf() in
- * xfs_imap_to_bp() above. If tp is NULL, this is just a normal
- * brelse(). If we're within a transaction, then xfs_trans_brelse()
- * will only release the buffer if it is not dirty within the
- * transaction. It will be OK to release the buffer in this case,
- * because inodes on disk are never destroyed and we will be locking the
- * new in-core inode before putting it in the cache where other
- * processes can find it. Thus we don't have to worry about the inode
- * being changed just because we released the buffer.
- */
- out_brelse:
- xfs_trans_brelse(tp, bp);
- return error;
-}
-
/*
* Validate di_extsize hint.
*
diff --git a/fs/xfs/libxfs/xfs_inode_buf.h b/fs/xfs/libxfs/xfs_inode_buf.h
index 081230faf7bdc..4de8673bfa61c 100644
--- a/fs/xfs/libxfs/xfs_inode_buf.h
+++ b/fs/xfs/libxfs/xfs_inode_buf.h
@@ -49,8 +49,6 @@ struct xfs_imap {
int xfs_imap_to_bp(struct xfs_mount *, struct xfs_trans *,
struct xfs_imap *, struct xfs_dinode **,
struct xfs_buf **, uint, uint);
-int xfs_iread(struct xfs_mount *, struct xfs_trans *,
- struct xfs_inode *, uint);
void xfs_dinode_calc_crc(struct xfs_mount *, struct xfs_dinode *);
void xfs_inode_to_disk(struct xfs_inode *ip, struct xfs_dinode *to,
xfs_lsn_t lsn);
diff --git a/fs/xfs/xfs_icache.c b/fs/xfs/xfs_icache.c
index 8bf1d15be3f6a..dd757c6614956 100644
--- a/fs/xfs/xfs_icache.c
+++ b/fs/xfs/xfs_icache.c
@@ -22,6 +22,7 @@
#include "xfs_dquot_item.h"
#include "xfs_dquot.h"
#include "xfs_reflink.h"
+#include "xfs_ialloc.h"
#include <linux/iversion.h>
@@ -510,10 +511,40 @@ xfs_iget_cache_miss(
if (!ip)
return -ENOMEM;
- error = xfs_iread(mp, tp, ip, flags);
+ error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, flags);
if (error)
goto out_destroy;
+ /*
+ * For version 5 superblocks, if we are initialising a new inode and we
+ * are not utilising the XFS_MOUNT_IKEEP inode cluster mode, we can
+ * simple build the new inode core with a random generation number.
+ *
+ * For version 4 (and older) superblocks, log recovery is dependent on
+ * the di_flushiter field being initialised from the current on-disk
+ * value and hence we must also read the inode off disk even when
+ * initializing new inodes.
+ */
+ if (xfs_sb_version_has_v3inode(&mp->m_sb) &&
+ (flags & XFS_IGET_CREATE) && !(mp->m_flags & XFS_MOUNT_IKEEP)) {
+ VFS_I(ip)->i_generation = prandom_u32();
+ } else {
+ struct xfs_dinode *dip;
+ struct xfs_buf *bp;
+
+ error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0, flags);
+ if (error)
+ goto out_destroy;
+
+ error = xfs_inode_from_disk(ip, dip);
+ if (!error)
+ xfs_buf_set_ref(bp, XFS_INO_REF);
+ xfs_trans_brelse(tp, bp);
+
+ if (error)
+ goto out_destroy;
+ }
+
if (!xfs_inode_verify_forks(ip)) {
error = -EFSCORRUPTED;
goto out_destroy;
--
2.26.2
