Set different grace time, make sure each of quota (user, group and project) timers can be set (by setquota) and get (by repquota) correctly. Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx> --- V2 did below changes: 1) Filter default quota timer (suggested by Eric Sandeen). 2) Try to merge the case from Darrick (please review): https://marc.info/?l=fstests&m=158207247224104&w=2 V3 did below changes: 1) _require_scratch_xfs_crc if tests on XFS (suggested by Eryu Guan) Thanks, Zorro tests/generic/594 | 108 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/594.out | 50 +++++++++++++++++++ tests/generic/group | 1 + 3 files changed, 159 insertions(+) create mode 100755 tests/generic/594 create mode 100644 tests/generic/594.out diff --git a/tests/generic/594 b/tests/generic/594 new file mode 100755 index 00000000..e501d54c --- /dev/null +++ b/tests/generic/594 @@ -0,0 +1,108 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test No. 594 +# +# Test per-type(user, group and project) filesystem quota timers, make sure +# each of grace time can be set/get properly. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/quota + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch +# V4 XFS doesn't support to mount project and group quota together +if [ "$FSTYP" = "xfs" ];then + _require_scratch_xfs_crc +fi +_require_quota + +_scratch_mkfs >$seqres.full 2>&1 +_scratch_enable_pquota +_qmount_option "usrquota,grpquota,prjquota" +_qmount +_require_prjquota $SCRATCH_DEV + +MIN=60 + +# get default time at first +def_time=`repquota -u $SCRATCH_MNT | \ + sed -n -e "/^Block/s/.* time: \(.*\); .* time: \(.*\)/\1 \2/p"` +echo "Default block and inode grace timers are: $def_time" >> $seqres.full + +filter_repquota() +{ + local blocktime=$1 + local inodetime=$2 + + _filter_scratch | sed -e "s,$blocktime,DEF_TIME,g" \ + -e "s,$inodetime,DEF_TIME,g" +} + +echo "1. set project quota timer" +setquota -t -P $((10 * MIN)) $((20 * MIN)) $SCRATCH_MNT +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | filter_repquota $def_time +echo + +echo "2. set group quota timer" +setquota -t -g $((30 * MIN)) $((40 * MIN)) $SCRATCH_MNT +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | filter_repquota $def_time +echo + +echo "3. set user quota timer" +setquota -t -u $((50 * MIN)) $((60 * MIN)) $SCRATCH_MNT +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | filter_repquota $def_time +echo + +# cycle mount, make sure the quota timers are still right +echo "4. cycle mount test-1" +_qmount +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | filter_repquota $def_time +echo + +# Run repair to force quota check +echo "5. fsck to force quota check" +_scratch_unmount +_repair_scratch_fs >> $seqres.full 2>&1 +echo + +# Remount (this time to run quotacheck) and check the limits. There's a bug +# in quotacheck where we would reset the ondisk default grace period to zero +# while the incore copy stays at whatever was read in prior to quotacheck. +# This will show up after the /next/ remount. +echo "6. cycle mount test-2" +_qmount +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | filter_repquota $def_time +echo + +# Remount and check the limits +echo "7. cycle mount test-3" +_qmount +repquota -ugP $SCRATCH_MNT | grep "Report\|^Block" | filter_repquota $def_time + +# success, all done +status=0 +exit diff --git a/tests/generic/594.out b/tests/generic/594.out new file mode 100644 index 00000000..f25e0fac --- /dev/null +++ b/tests/generic/594.out @@ -0,0 +1,50 @@ +QA output created by 594 +1. set project quota timer +*** Report for user quotas on device SCRATCH_DEV +Block grace time: DEF_TIME; Inode grace time: DEF_TIME +*** Report for group quotas on device SCRATCH_DEV +Block grace time: DEF_TIME; Inode grace time: DEF_TIME +*** Report for project quotas on device SCRATCH_DEV +Block grace time: 00:10; Inode grace time: 00:20 + +2. set group quota timer +*** Report for user quotas on device SCRATCH_DEV +Block grace time: DEF_TIME; Inode grace time: DEF_TIME +*** Report for group quotas on device SCRATCH_DEV +Block grace time: 00:30; Inode grace time: 00:40 +*** Report for project quotas on device SCRATCH_DEV +Block grace time: 00:10; Inode grace time: 00:20 + +3. set user quota timer +*** Report for user quotas on device SCRATCH_DEV +Block grace time: 00:50; Inode grace time: 01:00 +*** Report for group quotas on device SCRATCH_DEV +Block grace time: 00:30; Inode grace time: 00:40 +*** Report for project quotas on device SCRATCH_DEV +Block grace time: 00:10; Inode grace time: 00:20 + +4. cycle mount test-1 +*** Report for user quotas on device SCRATCH_DEV +Block grace time: 00:50; Inode grace time: 01:00 +*** Report for group quotas on device SCRATCH_DEV +Block grace time: 00:30; Inode grace time: 00:40 +*** Report for project quotas on device SCRATCH_DEV +Block grace time: 00:10; Inode grace time: 00:20 + +5. fsck to force quota check + +6. cycle mount test-2 +*** Report for user quotas on device SCRATCH_DEV +Block grace time: 00:50; Inode grace time: 01:00 +*** Report for group quotas on device SCRATCH_DEV +Block grace time: 00:30; Inode grace time: 00:40 +*** Report for project quotas on device SCRATCH_DEV +Block grace time: 00:10; Inode grace time: 00:20 + +7. cycle mount test-3 +*** Report for user quotas on device SCRATCH_DEV +Block grace time: 00:50; Inode grace time: 01:00 +*** Report for group quotas on device SCRATCH_DEV +Block grace time: 00:30; Inode grace time: 00:40 +*** Report for project quotas on device SCRATCH_DEV +Block grace time: 00:10; Inode grace time: 00:20 diff --git a/tests/generic/group b/tests/generic/group index dc95b77b..a83f95cb 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -595,3 +595,4 @@ 591 auto quick rw pipe splice 592 auto quick encrypt 593 auto quick encrypt +594 auto quick quota -- 2.20.1
