On Wed, Nov 06, 2019 at 06:28:01PM -0700, Allison Collins wrote:
> This patch modifies the attr set routines to be delay ready.
> This means they no longer roll or commit transactions, but instead
> return -EAGAIN to have the calling routine roll and refresh the
> transaction. In this series, xfs_attr_set_args has become
> xfs_attr_set_later, which uses a state machine to keep track
> of where it was when EAGAIN was returned. Part of
> xfs_attr_leaf_addname has been factored out into a new helper
> function xfs_attr_leaf_try_add to allow transaction cycling between
> the two routines, and the flipflags logic has been removed since we
> can simply cancel the transaction upon error. xfs_attr_set_args
> consists of a simple loop to refresh the transaction until the
> operation is completed.
>
> Signed-off-by: Allison Collins <allison.henderson@xxxxxxxxxx>
> ---
> fs/xfs/libxfs/xfs_attr.c | 435 +++++++++++++++++++++++------------------------
> fs/xfs/libxfs/xfs_attr.h | 1 +
> 2 files changed, 211 insertions(+), 225 deletions(-)
>
> diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
> index 38d5c5c..97e5ae0 100644
> --- a/fs/xfs/libxfs/xfs_attr.c
> +++ b/fs/xfs/libxfs/xfs_attr.c
> @@ -58,6 +58,7 @@ STATIC int xfs_attr_node_hasname(xfs_da_args_t *args,
> struct xfs_da_state **state);
> STATIC int xfs_attr_fillstate(xfs_da_state_t *state);
> STATIC int xfs_attr_refillstate(xfs_da_state_t *state);
> +STATIC int xfs_attr_leaf_try_add(struct xfs_da_args *args, struct xfs_buf *bp);
>
>
> STATIC int
> @@ -250,9 +251,79 @@ int
> xfs_attr_set_args(
> struct xfs_da_args *args)
> {
> + int error = 0;
> + int err2 = 0;
> + struct xfs_buf *leaf_bp = NULL;
> +
> + do {
> + error = xfs_attr_set_later(args, &leaf_bp);
> + if (error && error != -EAGAIN)
> + goto out;
> +
> + xfs_trans_log_inode(args->trans, args->dp,
> + XFS_ILOG_CORE | XFS_ILOG_ADATA);
Same question as the last patch about ADATA.
> +
> + err2 = xfs_trans_roll(&args->trans);
> + if (err2) {
> + error = err2;
> + goto out;
> + }
> +
> + /* Rejoin inode and leaf if needed */
> + xfs_trans_ijoin(args->trans, args->dp, 0);
> + if (leaf_bp) {
> + xfs_trans_bjoin(args->trans, leaf_bp);
> + xfs_trans_bhold(args->trans, leaf_bp);
> + }
> +
> + } while (error == -EAGAIN);
> +
> +out:
> + return error;
> +}
> +
> +/*
> + * Set the attribute specified in @args.
> + * This routine is meant to function as a delayed operation, and may return
> + * -EAGAIN when the transaction needs to be rolled. Calling functions will need
> + * to handle this, and recall the function until a successful error code is
> + * returned.
> + */
> +int
> +xfs_attr_set_later(
> + struct xfs_da_args *args,
> + struct xfs_buf **leaf_bp)
> +{
> struct xfs_inode *dp = args->dp;
> - struct xfs_buf *leaf_bp = NULL;
> - int error, error2 = 0;;
> + int error = 0;
> + int sf_size;
> +
> + /* State machine switch */
> + switch (args->dc.dc_state) {
> + case XFS_DC_SF_TO_LEAF:
> + goto sf_to_leaf;
> + case XFS_DC_ALLOC_LEAF:
> + case XFS_DC_FOUND_LBLK:
> + goto leaf;
> + case XFS_DC_FOUND_NBLK:
> + case XFS_DC_ALLOC_NODE:
> + case XFS_DC_LEAF_TO_NODE:
> + goto node;
> + default:
> + break;
> + }
> +
> + /*
> + * New inodes may not have an attribute fork yet. So set the attribute
> + * fork appropriately
> + */
> + if (XFS_IFORK_Q((args->dp)) == 0) {
> + sf_size = sizeof(struct xfs_attr_sf_hdr) +
> + XFS_ATTR_SF_ENTSIZE_BYNAME(args->name.len, args->valuelen);
> + xfs_bmap_set_attrforkoff(args->dp, sf_size, NULL);
> + args->dp->i_afp = kmem_zone_zalloc(xfs_ifork_zone, 0);
> + args->dp->i_afp->if_flags = XFS_IFEXTENTS;
> + }
>
> /*
> * If the attribute list is non-existent or a shortform list,
> @@ -272,21 +343,14 @@ xfs_attr_set_args(
> * Try to add the attr to the attribute list in the inode.
> */
> error = xfs_attr_try_sf_addname(dp, args);
> - if (error != -ENOSPC) {
> - if (dp->i_mount->m_flags & XFS_MOUNT_WSYNC)
> - xfs_trans_set_sync(args->trans);
Where does the xfs_trans_set_sync call go? Do we not need it anymore?
> - error2 = xfs_trans_commit(args->trans);
> - args->trans = NULL;
> - return error ? error : error2;
> - }
> -
> + if (error != -ENOSPC)
> + return error;
>
> /*
> * It won't fit in the shortform, transform to a leaf block.
> * GROT: another possible req'mt for a double-split btree op.
> */
> - error = xfs_attr_shortform_to_leaf(args, &leaf_bp);
> + error = xfs_attr_shortform_to_leaf(args, leaf_bp);
> if (error)
> return error;
>
> @@ -294,43 +358,42 @@ xfs_attr_set_args(
> * Prevent the leaf buffer from being unlocked so that a
> * concurrent AIL push cannot grab the half-baked leaf
> * buffer and run into problems with the write verifier.
> - * Once we're done rolling the transaction we can release
> - * the hold and add the attr to the leaf.
> */
> - xfs_trans_bhold(args->trans, leaf_bp);
> - error = xfs_defer_finish(&args->trans);
> - xfs_trans_bhold_release(args->trans, leaf_bp);
> - if (error) {
> - xfs_trans_brelse(args->trans, leaf_bp);
> - return error;
> - }
> +
> + xfs_trans_bhold(args->trans, *leaf_bp);
> + args->dc.dc_state = XFS_DC_SF_TO_LEAF;
> + return -EAGAIN;
> + }
> +sf_to_leaf:
> +
> + /*
> + * After a shortform to leaf conversion, we need to hold the leaf and
> + * cylce out the transaction. When we get back, we need to release
"cycle"
> + * the leaf.
> + */
> + if (*leaf_bp != NULL) {
> + xfs_trans_brelse(args->trans, *leaf_bp);
> + *leaf_bp = NULL;
> }
>
> if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
> + error = xfs_attr_leaf_try_add(args, *leaf_bp);
> + if (error == -ENOSPC)
> + args->dc.dc_state = XFS_DC_LEAF_TO_NODE;
> + else if (error)
> + return error;
> + else
> + args->dc.dc_state = XFS_DC_FOUND_LBLK;
> + return -EAGAIN;
Please use a switch statement here...
switch (error) {
case -ENOSPC:
dc_state = LEAF_TO_NODE;
return -EAGAIN;
case 0:
dc_state = FOUND_LBLK;
return -EAGAIN;
default:
return error;
}
> +leaf:
> error = xfs_attr_leaf_addname(args);
> if (error == -ENOSPC) {
> - /*
> - * Commit that transaction so that the node_addname()
> - * call can manage its own transactions.
> - */
> - error = xfs_defer_finish(&args->trans);
> - if (error)
> - return error;
> -
> - /*
> - * Commit the current trans (including the inode) and
> - * start a new one.
> - */
> - error = xfs_trans_roll_inode(&args->trans, dp);
> - if (error)
> - return error;
> -
> - /*
> - * Fob the rest of the problem off on the Btree code.
> - */
> - error = xfs_attr_node_addname(args);
> + args->dc.dc_state = XFS_DC_LEAF_TO_NODE;
> + return -EAGAIN;
> }
> } else {
> + args->dc.dc_state = XFS_DC_LEAF_TO_NODE;
> +node:
> error = xfs_attr_node_addname(args);
> }
> return error;
> @@ -764,27 +827,26 @@ xfs_attr_leaf_try_add(
> *
> * This leaf block cannot have a "remote" value, we only call this routine
> * if bmap_one_block() says there is only one block (ie: no remote blks).
> + *
> + * This routine is meant to function as a delayed operation, and may return
> + * -EAGAIN when the transaction needs to be rolled. Calling functions will need
> + * to handle this, and recall the function until a successful error code is
> + * returned.
> */
> STATIC int
> xfs_attr_leaf_addname(struct xfs_da_args *args)
> {
> - int error, forkoff;
> - struct xfs_buf *bp = NULL;
> + int error, nmap;
> struct xfs_inode *dp = args->dp;
> + struct xfs_bmbt_irec *map = &args->dc.map;
>
> - trace_xfs_attr_leaf_addname(args);
> -
> - error = xfs_attr_leaf_try_add(args, bp);
> - if (error)
> - return error;
> -
> - /*
> - * Commit the transaction that added the attr name so that
> - * later routines can manage their own transactions.
> - */
> - error = xfs_trans_roll_inode(&args->trans, dp);
> - if (error)
> - return error;
> + /* State machine switch */
> + switch (args->dc.dc_state) {
> + case XFS_DC_ALLOC_LEAF:
> + goto alloc_leaf;
> + default:
> + break;
> + }
>
> /*
> * If there was an out-of-line value, allocate the blocks we
> @@ -793,90 +855,58 @@ xfs_attr_leaf_addname(struct xfs_da_args *args)
> * maximum size of a transaction and/or hit a deadlock.
> */
> if (args->rmtblkno > 0) {
> - error = xfs_attr_rmtval_set(args);
> - if (error)
> - return error;
> - }
>
> - /*
> - * If this is an atomic rename operation, we must "flip" the
> - * incomplete flags on the "new" and "old" attribute/value pairs
> - * so that one disappears and one appears atomically. Then we
> - * must remove the "old" attribute/value pair.
> - */
> - if (args->op_flags & XFS_DA_OP_RENAME) {
> - /*
> - * In a separate transaction, set the incomplete flag on the
> - * "old" attr and clear the incomplete flag on the "new" attr.
> - */
> - error = xfs_attr3_leaf_flipflags(args);
> - if (error)
> - return error;
> - /*
> - * Commit the flag value change and start the next trans in
> - * series.
> - */
> - error = xfs_trans_roll_inode(&args->trans, args->dp);
> - if (error)
> - return error;
> + /* Open coded xfs_attr_rmtval_set without trans handling */
Can't we just fix that instead of reproducing it here?
Especially because I think I see it twice in this patch?
Also, do you have a git tree handy? I /think/ I see how this works but
oh man is it difficult to see that from patches alone.
--D
>
> - /*
> - * Dismantle the "old" attribute/value pair by removing
> - * a "remote" value (if it exists).
> - */
> - args->index = args->index2;
> - args->blkno = args->blkno2;
> - args->rmtblkno = args->rmtblkno2;
> - args->rmtblkcnt = args->rmtblkcnt2;
> - args->rmtvaluelen = args->rmtvaluelen2;
> - if (args->rmtblkno) {
> - error = xfs_attr_rmtval_remove(args);
> - if (error)
> - return error;
> - }
> + args->dc.lfileoff = 0;
> + args->dc.lblkno = 0;
> + args->dc.blkcnt = 0;
> + args->rmtblkcnt = 0;
> + args->rmtblkno = 0;
> + memset(map, 0, sizeof(struct xfs_bmbt_irec));
>
> - /*
> - * Read in the block containing the "old" attr, then
> - * remove the "old" attr from that block (neat, huh!)
> - */
> - error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno,
> - XFS_DABUF_MAP_NOMAPPING, &bp);
> + error = xfs_attr_rmt_find_hole(args);
> if (error)
> return error;
>
> - xfs_attr3_leaf_remove(bp, args);
> + args->dc.blkcnt = args->rmtblkcnt;
> + args->dc.lblkno = args->rmtblkno;
>
> /*
> - * If the result is small enough, shrink it all into the inode.
> + * Roll through the "value", allocating blocks on disk as
> + * required.
> */
> - if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
> - error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
> - /* bp is gone due to xfs_da_shrink_inode */
> - if (error)
> - return error;
> - error = xfs_defer_finish(&args->trans);
> +alloc_leaf:
> + while (args->dc.blkcnt > 0) {
> + nmap = 1;
> + error = xfs_bmapi_write(args->trans, dp,
> + (xfs_fileoff_t)args->dc.lblkno,
> + args->dc.blkcnt, XFS_BMAPI_ATTRFORK,
> + args->total, map, &nmap);
> if (error)
> return error;
> - }
> + ASSERT(nmap == 1);
> + ASSERT((map->br_startblock != DELAYSTARTBLOCK) &&
> + (map->br_startblock != HOLESTARTBLOCK));
>
> - /*
> - * Commit the remove and start the next trans in series.
> - */
> - error = xfs_trans_roll_inode(&args->trans, dp);
> + /* roll attribute extent map forwards */
> + args->dc.lblkno += map->br_blockcount;
> + args->dc.blkcnt -= map->br_blockcount;
>
> - } else if (args->rmtblkno > 0) {
> - /*
> - * Added a "remote" value, just clear the incomplete flag.
> - */
> - error = xfs_attr3_leaf_clearflag(args);
> + args->dc.dc_state = XFS_DC_ALLOC_LEAF;
> + return -EAGAIN;
> + }
> +
> + error = xfs_attr_rmtval_set_value(args);
> if (error)
> return error;
> + }
>
> + if (args->rmtblkno > 0) {
> /*
> - * Commit the flag value change and start the next trans in
> - * series.
> + * Added a "remote" value, just clear the incomplete flag.
> */
> - error = xfs_trans_roll_inode(&args->trans, args->dp);
> + error = xfs_attr3_leaf_clearflag(args);
> }
> return error;
> }
> @@ -1017,16 +1047,23 @@ xfs_attr_node_hasname(
> *
> * "Remote" attribute values confuse the issue and atomic rename operations
> * add a whole extra layer of confusion on top of that.
> + *
> + * This routine is meant to function as a delayed operation, and may return
> + * -EAGAIN when the transaction needs to be rolled. Calling functions will need
> + * to handle this, and recall the function until a successful error code is
> + *returned.
> */
> STATIC int
> xfs_attr_node_addname(
> struct xfs_da_args *args)
> {
> - struct xfs_da_state *state;
> + struct xfs_da_state *state = NULL;
> struct xfs_da_state_blk *blk;
> struct xfs_inode *dp;
> - struct xfs_mount *mp;
> - int retval, error;
> + int retval = 0;
> + int error = 0;
> + int nmap;
> + struct xfs_bmbt_irec *map = &args->dc.map;
>
> trace_xfs_attr_node_addname(args);
>
> @@ -1034,8 +1071,17 @@ xfs_attr_node_addname(
> * Fill in bucket of arguments/results/context to carry around.
> */
> dp = args->dp;
> - mp = dp->i_mount;
> -restart:
> +
> + /* State machine switch */
> + switch (args->dc.dc_state) {
> + case XFS_DC_FOUND_NBLK:
> + goto found_nblk;
> + case XFS_DC_ALLOC_NODE:
> + goto alloc_node;
> + default:
> + break;
> + }
> +
> /*
> * Search to see if name already exists, and get back a pointer
> * to where it should go.
> @@ -1085,19 +1131,12 @@ xfs_attr_node_addname(
> error = xfs_attr3_leaf_to_node(args);
> if (error)
> goto out;
> - error = xfs_defer_finish(&args->trans);
> - if (error)
> - goto out;
>
> /*
> - * Commit the node conversion and start the next
> - * trans in the chain.
> + * Restart routine from the top. No need to set the
> + * state
> */
> - error = xfs_trans_roll_inode(&args->trans, dp);
> - if (error)
> - goto out;
> -
> - goto restart;
> + return -EAGAIN;
> }
>
> /*
> @@ -1109,9 +1148,6 @@ xfs_attr_node_addname(
> error = xfs_da3_split(state);
> if (error)
> goto out;
> - error = xfs_defer_finish(&args->trans);
> - if (error)
> - goto out;
> } else {
> /*
> * Addition succeeded, update Btree hashvals.
> @@ -1126,13 +1162,9 @@ xfs_attr_node_addname(
> xfs_da_state_free(state);
> state = NULL;
>
> - /*
> - * Commit the leaf addition or btree split and start the next
> - * trans in the chain.
> - */
> - error = xfs_trans_roll_inode(&args->trans, dp);
> - if (error)
> - goto out;
> + args->dc.dc_state = XFS_DC_FOUND_NBLK;
> + return -EAGAIN;
> +found_nblk:
>
> /*
> * If there was an out-of-line value, allocate the blocks we
> @@ -1141,104 +1173,57 @@ xfs_attr_node_addname(
> * maximum size of a transaction and/or hit a deadlock.
> */
> if (args->rmtblkno > 0) {
> - error = xfs_attr_rmtval_set(args);
> - if (error)
> - return error;
> - }
> + /* Open coded xfs_attr_rmtval_set without trans handling */
> + args->dc.lblkno = 0;
> + args->dc.lfileoff = 0;
> + args->dc.blkcnt = 0;
> + args->rmtblkcnt = 0;
> + args->rmtblkno = 0;
> + memset(map, 0, sizeof(struct xfs_bmbt_irec));
>
> - /*
> - * If this is an atomic rename operation, we must "flip" the
> - * incomplete flags on the "new" and "old" attribute/value pairs
> - * so that one disappears and one appears atomically. Then we
> - * must remove the "old" attribute/value pair.
> - */
> - if (args->op_flags & XFS_DA_OP_RENAME) {
> - /*
> - * In a separate transaction, set the incomplete flag on the
> - * "old" attr and clear the incomplete flag on the "new" attr.
> - */
> - error = xfs_attr3_leaf_flipflags(args);
> - if (error)
> - goto out;
> - /*
> - * Commit the flag value change and start the next trans in
> - * series
> - */
> - error = xfs_trans_roll_inode(&args->trans, args->dp);
> + error = xfs_attr_rmt_find_hole(args);
> if (error)
> - goto out;
> + return error;
>
> + args->dc.blkcnt = args->rmtblkcnt;
> + args->dc.lblkno = args->rmtblkno;
> /*
> - * Dismantle the "old" attribute/value pair by removing
> - * a "remote" value (if it exists).
> + * Roll through the "value", allocating blocks on disk as
> + * required.
> */
> - args->index = args->index2;
> - args->blkno = args->blkno2;
> - args->rmtblkno = args->rmtblkno2;
> - args->rmtblkcnt = args->rmtblkcnt2;
> - args->rmtvaluelen = args->rmtvaluelen2;
> - if (args->rmtblkno) {
> - error = xfs_attr_rmtval_remove(args);
> +alloc_node:
> + while (args->dc.blkcnt > 0) {
> + nmap = 1;
> + error = xfs_bmapi_write(args->trans, dp,
> + (xfs_fileoff_t)args->dc.lblkno, args->dc.blkcnt,
> + XFS_BMAPI_ATTRFORK, args->total, map, &nmap);
> if (error)
> return error;
> - }
>
> - /*
> - * Re-find the "old" attribute entry after any split ops.
> - * The INCOMPLETE flag means that we will find the "old"
> - * attr, not the "new" one.
> - */
> - args->name.type |= XFS_ATTR_INCOMPLETE;
> - state = xfs_da_state_alloc();
> - state->args = args;
> - state->mp = mp;
> - state->inleaf = 0;
> - error = xfs_da3_node_lookup_int(state, &retval);
> - if (error)
> - goto out;
> + ASSERT(nmap == 1);
> + ASSERT((map->br_startblock != DELAYSTARTBLOCK) &&
> + (map->br_startblock != HOLESTARTBLOCK));
>
> - /*
> - * Remove the name and update the hashvals in the tree.
> - */
> - blk = &state->path.blk[ state->path.active-1 ];
> - ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
> - error = xfs_attr3_leaf_remove(blk->bp, args);
> - xfs_da3_fixhashpath(state, &state->path);
> + /* roll attribute extent map forwards */
> + args->dc.lblkno += map->br_blockcount;
> + args->dc.blkcnt -= map->br_blockcount;
>
> - /*
> - * Check to see if the tree needs to be collapsed.
> - */
> - if (retval && (state->path.active > 1)) {
> - error = xfs_da3_join(state);
> - if (error)
> - goto out;
> - error = xfs_defer_finish(&args->trans);
> - if (error)
> - goto out;
> + args->dc.dc_state = XFS_DC_ALLOC_NODE;
> + return -EAGAIN;
> }
>
> - /*
> - * Commit and start the next trans in the chain.
> - */
> - error = xfs_trans_roll_inode(&args->trans, dp);
> + error = xfs_attr_rmtval_set_value(args);
> if (error)
> - goto out;
> + return error;
> + }
>
> - } else if (args->rmtblkno > 0) {
> + if (args->rmtblkno > 0) {
> /*
> * Added a "remote" value, just clear the incomplete flag.
> */
> error = xfs_attr3_leaf_clearflag(args);
> if (error)
> goto out;
> -
> - /*
> - * Commit the flag value change and start the next trans in
> - * series.
> - */
> - error = xfs_trans_roll_inode(&args->trans, args->dp);
> - if (error)
> - goto out;
> }
> retval = error = 0;
>
> diff --git a/fs/xfs/libxfs/xfs_attr.h b/fs/xfs/libxfs/xfs_attr.h
> index fb8bf5b..c710387 100644
> --- a/fs/xfs/libxfs/xfs_attr.h
> +++ b/fs/xfs/libxfs/xfs_attr.h
> @@ -149,6 +149,7 @@ int xfs_attr_get(struct xfs_inode *ip, struct xfs_name *name,
> int xfs_attr_set(struct xfs_inode *dp, struct xfs_name *name,
> unsigned char *value, int valuelen, int flags);
> int xfs_attr_set_args(struct xfs_da_args *args);
> +int xfs_attr_set_later(struct xfs_da_args *args, struct xfs_buf **leaf_bp);
> int xfs_attr_remove(struct xfs_inode *dp, struct xfs_name *name, int flags);
> int xfs_has_attr(struct xfs_da_args *args);
> int xfs_attr_remove_args(struct xfs_da_args *args);
> --
> 2.7.4
>
