On Thu, Oct 24, 2019 at 12:47:17PM +0800, Ian Kent wrote:
> On Tue, 2019-10-22 at 18:01 +0800, Zorro Lang wrote:
> > XFS is changing to suit the new mount API, so add this case to make
> > sure the changing won't bring in regression issue on xfs mount option
> > parse phase, and won't change some default behaviors either.
>
> I think this isn't quite right:
>
> [root@f30 xfstests-dev]# diff -u /home/raven/xfstests-dev/tests/xfs/148.out /home/raven/xfstests-dev/results//xfs/148.out.bad
> --- /home/raven/xfstests-dev/tests/xfs/148.out 2019-10-24 09:27:27.304929313 +0800
> +++ /home/raven/xfstests-dev/results//xfs/148.out.bad 2019-10-24 10:42:40.739436223 +0800
> @@ -3,4 +3,10 @@
> ** create loop log device
> ** create loop mount point
> ** start xfs mount testing ...
> +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt
> +ERROR: expect there's logbufs in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found
> +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt
> +ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found
> +[FAILED]: mount /dev/loop0 /mnt/test/148.mnt
> +ERROR: expect there's logbsize in rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota, but not found
> ** end of testing
>
> Above logbufs and logbsize are present in the options string but
> an error is reported.
Oh, There're two reasons to cause this failure:
1) I made a mistake at here:
if [ $rc -eq 0 ];then
if [ "$found" != "true" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts"
echo "ERROR: expect there's $key in $info, but not found"
return 1
fi
else
if [ "$found" != "false" ];then
echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT $opts"
echo "ERROR: expect there's not $key in $info, but found"
return 1
fi
fi
I should exchange the "there's" line with "there's not" line.
2) The case expect there's not "logbufs=N" or "logbsize=N" output as default.
But your system has these two options in /proc/mounts if mount without any
options.
Hmm... strange, I've tested this case on rhel8 and rhel7, all passed. Where
can I reproduce this error?
Thanks,
Zorro
>
> Ian
>
> >
> > Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx>
> > ---
> > tests/xfs/148 | 315
> > ++++++++++++++++++++++++++++++++++++++++++++++
> > tests/xfs/148.out | 6 +
> > tests/xfs/group | 1 +
> > 3 files changed, 322 insertions(+)
> > create mode 100755 tests/xfs/148
> > create mode 100644 tests/xfs/148.out
> >
> > diff --git a/tests/xfs/148 b/tests/xfs/148
> > new file mode 100755
> > index 00000000..5c268f18
> > --- /dev/null
> > +++ b/tests/xfs/148
> > @@ -0,0 +1,315 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved.
> > +#
> > +# FS QA Test 148
> > +#
> > +# XFS mount options sanity check, refer to 'man 5 xfs'.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > + $UMOUNT_PROG $LOOP_MNT 2>/dev/null
> > + if [ -n "$LOOP_DEV" ];then
> > + _destroy_loop_device $LOOP_DEV 2>/dev/null
> > + fi
> > + if [ -n "$LOOP_SPARE_DEV" ];then
> > + _destroy_loop_device $LOOP_SPARE_DEV 2>/dev/null
> > + fi
> > + rm -f $LOOP_IMG
> > + rm -f $LOOP_SPARE_IMG
> > + rmdir $LOOP_MNT
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +_supported_fs xfs
> > +_supported_os Linux
> > +_require_test
> > +_require_loop
> > +_require_xfs_io_command "falloc"
> > +
> > +LOOP_IMG=$TEST_DIR/$seq.dev
> > +LOOP_SPARE_IMG=$TEST_DIR/$seq.logdev
> > +LOOP_MNT=$TEST_DIR/$seq.mnt
> > +
> > +echo "** create loop device"
> > +$XFS_IO_PROG -f -c "falloc 0 1g" $LOOP_IMG
> > +LOOP_DEV=`_create_loop_device $LOOP_IMG`
> > +
> > +echo "** create loop log device"
> > +$XFS_IO_PROG -f -c "falloc 0 512m" $LOOP_SPARE_IMG
> > +LOOP_SPARE_DEV=`_create_loop_device $LOOP_SPARE_IMG`
> > +
> > +echo "** create loop mount point"
> > +rmdir $LOOP_MNT 2>/dev/null
> > +mkdir -p $LOOP_MNT || _fail "cannot create loopback mount point"
> > +
> > +# avoid the effection from MKFS_OPTIONS
> > +MKFS_OPTIONS=""
> > +do_mkfs()
> > +{
> > + $MKFS_XFS_PROG -f $* $LOOP_DEV | _filter_mkfs >$seqres.full
> > 2>$tmp.mkfs
> > + if [ "${PIPESTATUS[0]}" -ne 0 ]; then
> > + _fail "Fails on _mkfs_dev $* $LOOP_DEV"
> > + fi
> > + . $tmp.mkfs
> > +}
> > +
> > +is_dev_mounted()
> > +{
> > + findmnt --source $LOOP_DEV >/dev/null
> > + return $?
> > +}
> > +
> > +get_mount_info()
> > +{
> > + findmnt --source $LOOP_DEV -o OPTIONS -n
> > +}
> > +
> > +force_unmount()
> > +{
> > + $UMOUNT_PROG $LOOP_MNT >/dev/null 2>&1
> > +}
> > +
> > +# _do_test <mount options> <should be mounted?> [<key string> <key
> > should be found?>]
> > +_do_test()
> > +{
> > + local opts="$1"
> > + local mounted="$2" # pass or fail
> > + local key="$3"
> > + local found="$4" # true or false
> > + local rc
> > + local info
> > +
> > + # mount test
> > + _mount $LOOP_DEV $LOOP_MNT $opts 2>/dev/null
> > + rc=$?
> > + if [ $rc -eq 0 ];then
> > + if [ "${mounted}" = "fail" ];then
> > + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
> > $opts"
> > + echo "ERROR: expect ${mounted}, but pass"
> > + return 1
> > + fi
> > + is_dev_mounted
> > + if [ $? -ne 0 ];then
> > + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
> > $opts"
> > + echo "ERROR: fs not mounted even mount return
> > 0"
> > + return 1
> > + fi
> > + else
> > + if [ "${mount_ret}" = "pass" ];then
> > + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
> > $opts"
> > + echo "ERROR: expect ${mounted}, but fail"
> > + return 1
> > + fi
> > + is_dev_mounted
> > + if [ $? -eq 0 ];then
> > + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
> > $opts"
> > + echo "ERROR: fs is mounted even mount return
> > non-zero"
> > + return 1
> > + fi
> > + fi
> > +
> > + # Skip below checking if "$key" argument isn't specified
> > + if [ -z "$key" ];then
> > + return 0
> > + fi
> > + # Check the mount options after fs mounted.
> > + info=`get_mount_info`
> > + echo $info | grep -q "${key}"
> > + rc=$?
> > + if [ $rc -eq 0 ];then
> > + if [ "$found" != "true" ];then
> > + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
> > $opts"
> > + echo "ERROR: expect there's $key in $info, but
> > not found"
> > + return 1
> > + fi
> > + else
> > + if [ "$found" != "false" ];then
> > + echo "[FAILED]: mount $LOOP_DEV $LOOP_MNT
> > $opts"
> > + echo "ERROR: expect there's not $key in $info,
> > but found"
> > + return 1
> > + fi
> > + fi
> > +
> > + return 0
> > +}
> > +
> > +do_test()
> > +{
> > + # force unmount before testing
> > + force_unmount
> > + _do_test "$@"
> > + # force unmount after testing
> > + force_unmount
> > +}
> > +
> > +echo "** start xfs mount testing ..."
> > +# Test allocsize=size
> > +# Valid values for this option are page size (typically 4KiB)
> > through to 1GiB
> > +do_mkfs
> > +if [ $dbsize -ge 1024 ];then
> > + blsize="$((dbsize / 1024))k"
> > +fi
> > +do_test "" pass "allocsize" "false"
> > +do_test "-o allocsize=$blsize" pass "allocsize=$blsize" "true"
> > +do_test "-o allocsize=1048576k" pass "allocsize=1048576k" "true"
> > +do_test "-o allocsize=$((dbsize / 2))" fail
> > +do_test "-o allocsize=2g" fail
> > +
> > +# Test attr2
> > +do_mkfs -m crc=1
> > +do_test "" pass "attr2" "true"
> > +do_test "-o attr2" pass "attr2" "true"
> > +do_test "-o noattr2" fail
> > +do_mkfs -m crc=0
> > +do_test "" pass "attr2" "true"
> > +do_test "-o attr2" pass "attr2" "true"
> > +do_test "-o noattr2" pass "attr2" "false"
> > +
> > +# Test discard
> > +do_mkfs
> > +do_test "" pass "discard" "false"
> > +do_test "-o discard" pass "discard" "true"
> > +do_test "-o nodiscard" pass "discard" "false"
> > +
> > +# Test grpid|bsdgroups|nogrpid|sysvgroups
> > +do_test "" pass "grpid" "false"
> > +do_test "-o grpid" pass "grpid" "true"
> > +do_test "-o bsdgroups" pass "grpid" "true"
> > +do_test "-o nogrpid" pass "grpid" "false"
> > +do_test "-o sysvgroups" pass "grpid" "false"
> > +
> > +# Test filestreams
> > +do_test "" pass "filestreams" "false"
> > +do_test "-o filestreams" pass "filestreams" "true"
> > +
> > +# Test ikeep
> > +do_test "" pass "ikeep" "false"
> > +do_test "-o ikeep" pass "ikeep" "true"
> > +do_test "-o noikeep" pass "ikeep" "false"
> > +
> > +# Test inode32|inode64
> > +do_test "" pass "inode64" "true"
> > +do_test "-o inode32" pass "inode32" "true"
> > +do_test "-o inode64" pass "inode64" "true"
> > +
> > +# Test largeio
> > +do_test "" pass "largeio" "false"
> > +do_test "-o largeio" pass "largeio" "true"
> > +do_test "-o nolargeio" pass "largeio" "false"
> > +
> > +# Test logbufs=value. Valid numbers range from 2–8 inclusive.
> > +do_test "" pass "logbufs" "false"
> > +do_test "-o logbufs=8" pass "logbufs=8" "true"
> > +do_test "-o logbufs=2" pass "logbufs=2" "true"
> > +do_test "-o logbufs=1" fail
> > +###### but it gets logbufs=8 now, why? bug? #######
> > +# do_test "-o logbufs=0" fail
> > +do_test "-o logbufs=9" fail
> > +do_test "-o logbufs=99999999999999" fail
> > +
> > +# Test logbsize=value.
> > +do_mkfs -m crc=1 -l version=2
> > +do_test "" pass "logbsize" "false"
> > +do_test "-o logbsize=16384" pass "logbsize=16k" "true"
> > +do_test "-o logbsize=16k" pass "logbsize=16k" "true"
> > +do_test "-o logbsize=32k" pass "logbsize=32k" "true"
> > +do_test "-o logbsize=64k" pass "logbsize=64k" "true"
> > +do_test "-o logbsize=128k" pass "logbsize=128k" "true"
> > +do_test "-o logbsize=256k" pass "logbsize=256k" "true"
> > +do_test "-o logbsize=8k" fail
> > +do_test "-o logbsize=512k" fail
> > +####### it's invalid, but it set to default size 32k
> > +# do_test "-o logbsize=0" false
> > +do_mkfs -m crc=0 -l version=1
> > +do_test "" pass "logbsize" "false"
> > +do_test "-o logbsize=16384" pass "logbsize=16k" "true"
> > +do_test "-o logbsize=16k" pass "logbsize=16k" "true"
> > +do_test "-o logbsize=32k" pass "logbsize=32k" "true"
> > +do_test "-o logbsize=64k" fail
> > +
> > +# Test logdev
> > +do_mkfs
> > +do_test "" pass "logdev" "false"
> > +do_test "-o logdev=$LOOP_SPARE_DEV" fail
> > +do_mkfs -l logdev=$LOOP_SPARE_DEV
> > +do_test "-o logdev=$LOOP_SPARE_DEV" pass "logdev=$LOOP_SPARE_DEV"
> > "true"
> > +do_test "" fail
> > +
> > +# Test noalign
> > +do_mkfs
> > +do_test "" pass "noalign" "false"
> > +do_test "-o noalign" pass "noalign" "true"
> > +
> > +# Test norecovery
> > +do_test "" pass "norecovery" "false"
> > +do_test "-o norecovery,ro" pass "norecovery" "true"
> > +do_test "-o norecovery" fail
> > +
> > +# Test nouuid
> > +do_test "" pass "nouuid" "false"
> > +do_test "-o nouuid" pass "nouuid" "true"
> > +
> > +# Test noquota
> > +do_test "" pass "noquota" "true"
> > +do_test "-o noquota" pass "noquota" "true"
> > +
> > +# Test uquota/usrquota/quota/uqnoenforce/qnoenforce
> > +do_test "" pass "usrquota" "false"
> > +do_test "-o uquota" pass "usrquota" "true"
> > +do_test "-o usrquota" pass "usrquota" "true"
> > +do_test "-o quota" pass "usrquota" "true"
> > +do_test "-o uqnoenforce" pass "usrquota" "true"
> > +do_test "-o qnoenforce" pass "usrquota" "true"
> > +
> > +# Test gquota/grpquota/gqnoenforce
> > +do_test "" pass "grpquota" "false"
> > +do_test "-o gquota" pass "grpquota" "true"
> > +do_test "-o grpquota" pass "grpquota" "true"
> > +do_test "-o gqnoenforce" pass "gqnoenforce" "true"
> > +
> > +# Test pquota/prjquota/pqnoenforce
> > +do_test "" pass "prjquota" "false"
> > +do_test "-o pquota" pass "prjquota" "true"
> > +do_test "-o prjquota" pass "prjquota" "true"
> > +do_test "-o pqnoenforce" pass "pqnoenforce" "true"
> > +
> > +# Test sunit=value and swidth=value
> > +do_mkfs -d sunit=128,swidth=128
> > +do_test "-o sunit=8,swidth=8" pass "sunit=8,swidth=8" "true"
> > +do_test "-o sunit=8,swidth=64" pass "sunit=8,swidth=64" "true"
> > +do_test "-o sunit=128,swidth=128" pass "sunit=128,swidth=128" "true"
> > +do_test "-o sunit=256,swidth=256" pass "sunit=256,swidth=256" "true"
> > +do_test "-o sunit=2,swidth=2" fail
> > +
> > +# Test swalloc
> > +do_mkfs
> > +do_test "" pass "swalloc" "false"
> > +do_test "-o swalloc" pass "swalloc" "true"
> > +
> > +# Test wsync
> > +do_test "" pass "wsync" "false"
> > +do_test "-o wsync" pass "wsync" "true"
> > +
> > +echo "** end of testing"
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/148.out b/tests/xfs/148.out
> > new file mode 100644
> > index 00000000..a71d9231
> > --- /dev/null
> > +++ b/tests/xfs/148.out
> > @@ -0,0 +1,6 @@
> > +QA output created by 148
> > +** create loop device
> > +** create loop log device
> > +** create loop mount point
> > +** start xfs mount testing ...
> > +** end of testing
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index f4ebcd8c..019aebad 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -145,6 +145,7 @@
> > 145 dmapi
> > 146 dmapi
> > 147 dmapi
> > +148 auto quick mount
> > 150 dmapi
> > 151 dmapi
> > 152 dmapi
>
