Re: [PATCH 12/19] xfs: fill out the srcmap in iomap_begin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 09, 2019 at 08:27:15PM +0200, Christoph Hellwig wrote:
> Replace our local hacks to report the source block in the main iomap
> with the proper scrmap reporting.
> 
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> ---
>  fs/xfs/xfs_iomap.c | 49 +++++++++++++++++++++++-----------------------
>  1 file changed, 24 insertions(+), 25 deletions(-)
> 
> diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> index 18a0f8a5d8c9..d12eacdc9bba 100644
> --- a/fs/xfs/xfs_iomap.c
> +++ b/fs/xfs/xfs_iomap.c
> @@ -527,7 +527,8 @@ xfs_file_iomap_begin_delay(
>  	loff_t			offset,
>  	loff_t			count,
>  	unsigned		flags,
> -	struct iomap		*iomap)
> +	struct iomap		*iomap,
> +	struct iomap		*srcmap)
>  {
>  	struct xfs_inode	*ip = XFS_I(inode);
>  	struct xfs_mount	*mp = ip->i_mount;
> @@ -721,11 +722,13 @@ xfs_file_iomap_begin_delay(
>  found_cow:
>  	xfs_iunlock(ip, XFS_ILOCK_EXCL);
>  	if (imap.br_startoff <= offset_fsb) {
> -		/* ensure we only report blocks we have a reservation for */
> -		xfs_trim_extent(&imap, cmap.br_startoff, cmap.br_blockcount);
> -		return xfs_bmbt_to_iomap(ip, iomap, &imap, IOMAP_F_SHARED);
> +		error = xfs_bmbt_to_iomap(ip, srcmap, &imap, 0);
> +		if (error)
> +			return error;
> +	} else {
> +		xfs_trim_extent(&cmap, offset_fsb,
> +				imap.br_startoff - offset_fsb);
>  	}
> -	xfs_trim_extent(&cmap, offset_fsb, imap.br_startoff - offset_fsb);
>  	return xfs_bmbt_to_iomap(ip, iomap, &cmap, IOMAP_F_SHARED);
>  
>  out_unlock:
> @@ -933,7 +936,7 @@ xfs_file_iomap_begin(
>  {
>  	struct xfs_inode	*ip = XFS_I(inode);
>  	struct xfs_mount	*mp = ip->i_mount;
> -	struct xfs_bmbt_irec	imap;
> +	struct xfs_bmbt_irec	imap, cmap;
>  	xfs_fileoff_t		offset_fsb, end_fsb;
>  	int			nimaps = 1, error = 0;
>  	bool			shared = false;
> @@ -947,7 +950,7 @@ xfs_file_iomap_begin(
>  			!IS_DAX(inode) && !xfs_get_extsz_hint(ip)) {
>  		/* Reserve delalloc blocks for regular writeback. */
>  		return xfs_file_iomap_begin_delay(inode, offset, length, flags,
> -				iomap);
> +				iomap, srcmap);
>  	}
>  
>  	/*
> @@ -987,9 +990,6 @@ xfs_file_iomap_begin(
>  	 * been done up front, so we don't need to do them here.
>  	 */
>  	if (xfs_is_cow_inode(ip)) {
> -		struct xfs_bmbt_irec	cmap;
> -		bool			directio = (flags & IOMAP_DIRECT);
> -
>  		/* if zeroing doesn't need COW allocation, then we are done. */
>  		if ((flags & IOMAP_ZERO) &&
>  		    !needs_cow_for_zeroing(&imap, nimaps))
> @@ -997,23 +997,11 @@ xfs_file_iomap_begin(
>  
>  		/* may drop and re-acquire the ilock */
>  		error = xfs_reflink_allocate_cow(ip, &imap, &cmap, &shared,
> -				&lockmode, directio);
> +				&lockmode, flags & IOMAP_DIRECT);
>  		if (error)
>  			goto out_unlock;
> -
> -		/*
> -		 * For buffered writes we need to report the address of the
> -		 * previous block (if there was any) so that the higher level
> -		 * write code can perform read-modify-write operations; we
> -		 * won't need the CoW fork mapping until writeback.  For direct
> -		 * I/O, which must be block aligned, we need to report the
> -		 * newly allocated address.  If the data fork has a hole, copy
> -		 * the COW fork mapping to avoid allocating to the data fork.
> -		 */
> -		if (shared &&
> -		    (directio || imap.br_startblock == HOLESTARTBLOCK))
> -			imap = cmap;
> -
> +		if (shared)
> +			goto out_found_cow;
>  		end_fsb = imap.br_startoff + imap.br_blockcount;
>  		length = XFS_FSB_TO_B(mp, end_fsb) - offset;
>  	}
> @@ -1067,6 +1055,17 @@ xfs_file_iomap_begin(
>  	trace_xfs_iomap_found(ip, offset, length, XFS_DATA_FORK, &imap);
>  	goto out_finish;
>  
> +out_found_cow:
> +	xfs_iunlock(ip, lockmode);
> +	length = XFS_FSB_TO_B(mp, cmap.br_startoff + cmap.br_blockcount);
> +	trace_xfs_iomap_found(ip, offset, length - offset, XFS_COW_FORK, &cmap);
> +	if (imap.br_startblock != HOLESTARTBLOCK) {

TBH I've been wondering for a while now if it would make more sense to
do this in iomap_apply (and the open-coded versions in dax.c):

	struct iomap srcmap = { .type = IOMAP_HOLE };

in the iomap_apply function (and change the "if (!srcmap.type)" checks
to "if (srcmap.type != IOMAP_HOLE)").  That would get rid of the weird
situation where iomap.h doesn't define an iomap type name corresponding
to 0 but clearly it has some special meaning because the iomap code
changes behavior based on that.

It also strikes me as weird that for the @imap parameter, type == 0
would be considered a coding error but for @srcmap, we use type == 0 to
mean "no mapping" but we don't do that for @srcmap.type == IOMAP_HOLE.

I mention that because, if some ->iomap_begin function returns
IOMAP_HOLE then iomap_apply will pass the (hole) srcmap as the second
parameter to the ->actor function.  When that happens, iomap_write_begin
call will try to fill in the rest of the page from @srcmap (which is
hole), not the @iomap (which might not be a hole) which seems wrong.

As for this function, if we made the above change, then the conditional
becomes unneccessary -- we know this is a COW write, so we call
xfs_bmbt_to_iomap on both mappings and exit.  No need for special
casing.

--D

> +		error = xfs_bmbt_to_iomap(ip, srcmap, &imap, 0);
> +		if (error)
> +			return error;
> +	}
> +	return xfs_bmbt_to_iomap(ip, iomap, &cmap, IOMAP_F_SHARED);
> +
>  out_unlock:
>  	xfs_iunlock(ip, lockmode);
>  	return error;
> -- 
> 2.20.1
> 



[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux