On Tue, 2019-08-27 at 08:39 -0400, Brian Foster wrote:
> On Fri, Aug 23, 2019 at 08:59:27AM +0800, Ian Kent wrote:
> > The new mount-api uses an array of struct fs_parameter_spec for
> > parameter parsing, create this table populated with the xfs mount
> > parameters.
> >
> > The new mount-api table definition is wider than the token based
> > parameter table and interleaving the option description comments
> > between each table line is much less readable than adding them to
> > the end of each table entry. So add the option description comment
> > to each entry line even though it causes quite a few of the entries
> > to be longer than 80 characters.
> >
> > Signed-off-by: Ian Kent <raven@xxxxxxxxxx>
> > ---
> > fs/xfs/xfs_super.c | 48
> > +++++++++++++++++++++++++++++++++++++++++++++---
> > 1 file changed, 45 insertions(+), 3 deletions(-)
> >
> > diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
> > index f9450235533c..74c88b92ce22 100644
> > --- a/fs/xfs/xfs_super.c
> > +++ b/fs/xfs/xfs_super.c
> > @@ -38,6 +38,8 @@
> >
> > #include <linux/magic.h>
> > #include <linux/parser.h>
> > +#include <linux/fs_context.h>
> > +#include <linux/fs_parser.h>
> >
> > static const struct super_operations xfs_super_operations;
> > struct bio_set xfs_ioend_bioset;
> > @@ -47,9 +49,6 @@ static struct kset *xfs_kset; /* top-
> > level xfs sysfs dir */
> > static struct xfs_kobj xfs_dbg_kobj; /* global debug sysfs
> > attrs */
> > #endif
> >
> > -/*
> > - * Table driven mount option parser.
> > - */
You would rather it be kept?
Strictly speaking it's still a table driven parser so it
could be kept.
I just thought it was a useles comment since it doesn't add
value in terms of understanding what's going on, IOW I think
it's just noise.
>
> Not sure why this is comment is removed here if the associated code
> is
> staying put in this patch..?
>
> > enum {
> > Opt_logbufs, Opt_logbsize, Opt_logdev, Opt_rtdev, Opt_biosize,
> > Opt_wsync, Opt_noalign, Opt_swalloc, Opt_sunit, Opt_swidth,
> > Opt_nouuid,
> > @@ -109,6 +108,49 @@ static const match_table_t tokens = {
> > {Opt_err, NULL},
> > };
> >
> > +static const struct fs_parameter_spec xfs_param_specs[] = {
> > + fsparam_u32 ("logbufs", Opt_logbufs), /* number of XFS
> > log buffers */
> > + fsparam_string ("logbsize", Opt_logbsize), /* size of XFS log
> > buffers */
> > + fsparam_string ("logdev", Opt_logdev), /* log device */
> > + fsparam_string ("rtdev", Opt_rtdev), /* realtime I/O
> > device */
> > + fsparam_u32 ("biosize", Opt_biosize), /* log2 of
> > preferred buffered io size */
>
> Hmm.. it looks like the difference between numerical values as
> strings
> vs. numeric types is whether we support things like unit suffixes
> (i.e.
> "64k"). That said, Opt_biosize uses suffix_kstrtoint() similar to
> Opt_logbsize yet is defined here as a u32 (and Opt_allocsize falls
> into
> the same parsing code but is a string). Is that wrong or am I just
> missing something wrt to the type specifiers here?
Dave Chinner (and IIRC Darrick) made roughly comments about the
need for human unit values in the parser.
I know David has some patches to implement this but I hadn't
seen anything posted, he's probably over loaded with higher
priority work atm. so this is probably follow up patch fodder.
>
> Brian
>
> > + fsparam_flag ("wsync", Opt_wsync), /* safe-mode nfs
> > compatible mount */
> > + fsparam_flag ("noalign", Opt_noalign), /* turn off
> > stripe alignment */
> > + fsparam_flag ("swalloc", Opt_swalloc), /* turn on
> > stripe width allocation */
> > + fsparam_u32 ("sunit", Opt_sunit), /* data volume
> > stripe unit */
> > + fsparam_u32 ("swidth", Opt_swidth), /* data volume
> > stripe width */
> > + fsparam_flag ("nouuid", Opt_nouuid), /* ignore
> > filesystem UUID */
> > + fsparam_flag_no("grpid", Opt_grpid), /* group-ID from
> > parent directory (or not) */
> > + fsparam_flag ("bsdgroups", Opt_bsdgroups), /* group-ID from
> > parent directory */
> > + fsparam_flag ("sysvgroups", Opt_sysvgroups),/* group-ID from
> > current process */
> > + fsparam_string ("allocsize", Opt_allocsize), /* preferred
> > allocation size */
> > + fsparam_flag ("norecovery", Opt_norecovery),/* don't run XFS
> > recovery */
> > + fsparam_flag ("inode64", Opt_inode64), /* inodes can be
> > allocated anywhere */
> > + fsparam_flag ("inode32", Opt_inode32), /* inode
> > allocation limited to XFS_MAXINUMBER_32 */
> > + fsparam_flag_no("ikeep", Opt_ikeep), /* do not free (or
> > keep) empty inode clusters */
> > + fsparam_flag_no("largeio", Opt_largeio), /* report (or do
> > not report) large I/O sizes in stat() */
> > + fsparam_flag_no("attr2", Opt_attr2), /* do (or do not)
> > use attr2 attribute format */
> > + fsparam_flag ("filestreams",Opt_filestreams), /* use
> > filestreams allocator */
> > + fsparam_flag_no("quota", Opt_quota), /* disk quotas
> > (user) */
> > + fsparam_flag ("usrquota", Opt_usrquota), /* user quota
> > enabled */
> > + fsparam_flag ("grpquota", Opt_grpquota), /* group quota
> > enabled */
> > + fsparam_flag ("prjquota", Opt_prjquota), /* project quota
> > enabled */
> > + fsparam_flag ("uquota", Opt_uquota), /* user quota
> > (IRIX variant) */
> > + fsparam_flag ("gquota", Opt_gquota), /* group quota
> > (IRIX variant) */
> > + fsparam_flag ("pquota", Opt_pquota), /* project quota
> > (IRIX variant) */
> > + fsparam_flag ("uqnoenforce",Opt_uqnoenforce), /* user quota
> > limit enforcement */
> > + fsparam_flag ("gqnoenforce",Opt_gqnoenforce), /* group quota
> > limit enforcement */
> > + fsparam_flag ("pqnoenforce",Opt_pqnoenforce), /* project
> > quota limit enforcement */
> > + fsparam_flag ("qnoenforce", Opt_qnoenforce), /* same as
> > uqnoenforce */
> > + fsparam_flag_no("discard", Opt_discard), /* Do (or do not)
> > not discard unused blocks */
> > + fsparam_flag ("dax", Opt_dax), /* Enable
> > direct access to bdev pages */
> > + {}
> > +};
> > +
> > +static const struct fs_parameter_description xfs_fs_parameters = {
> > + .name = "XFS",
> > + .specs = xfs_param_specs,
> > +};
> >
> > STATIC int
> > suffix_kstrtoint(const substring_t *s, unsigned int base, int
> > *res)
> >
