From: Alvin Zheng <Alvin@xxxxxxxxxxxxxxxxx> Signed-off-by: Alvin Zheng <Alvin@xxxxxxxxxxxxxxxxx> --- man/man8/mkfs.xfs.8 | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/man/man8/mkfs.xfs.8 b/man/man8/mkfs.xfs.8 index 4b8c78c..45d7a84 100644 --- a/man/man8/mkfs.xfs.8 +++ b/man/man8/mkfs.xfs.8 @@ -115,9 +115,7 @@ When specifying parameters in units of sectors or filesystem blocks, the .B \-s option or the .B \-b -option first needs to be added to the command line. -Failure to specify the size of the units will result in illegal value errors -when parameters are quantified in those units. +option can be used to specify the size of the sector or block. If the size of the block or sector is not specified, the default size (block: 4KiB, sector: 512B) will be used. .PP Many feature options allow an optional argument of 0 or 1, to explicitly disable or enable the functionality. @@ -136,10 +134,6 @@ The filesystem block size is specified with a in bytes. The default value is 4096 bytes (4 KiB), the minimum is 512, and the maximum is 65536 (64 KiB). .IP -To specify any options on the command line in units of filesystem blocks, this -option must be specified first so that the filesystem block size is -applied consistently to all options. -.IP Although .B mkfs.xfs will accept any of these values and create a valid filesystem, @@ -894,10 +888,6 @@ is 512 bytes. The minimum value for sector size is .I sector_size must be a power of 2 size and cannot be made larger than the filesystem block size. -.IP -To specify any options on the command line in units of sectors, this -option must be specified first so that the sector size is -applied consistently to all options. .RE .TP .BI \-L " label" -- 1.8.3.1
