On Thu, Apr 18, 2019 at 07:29:50AM +1000, Dave Chinner wrote:
> On Tue, Apr 16, 2019 at 11:24:50PM -0700, Darrick J. Wong wrote:
> > From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> >
> > With the new copy on write functionality it's possible to reserve so
> > much COW space for a file that we end up overflowing i_delayed_blks.
> > The only user-visible effect of this is to cause totally wrong i_blocks
> > output in stat, so check for that.
> ....
> >
> > + umount $loop_mount > /dev/null 2>&1
> > + rm -rf $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/reflink
> > +
> > +# real QA test starts here
> > +_supported_os Linux
> > +_supported_fs xfs
> > +_require_scratch_reflink
> > +_require_loop
> > +_require_xfs_debug
> > +
> > +echo "Format and mount"
> > +_scratch_mkfs > "$seqres.full" 2>&1
> > +_scratch_mount
> > +_require_fs_space $SCRATCH_MNT 2400000 # 100T fs requires ~2.4GB of space
> > +
> > +loop_file=$SCRATCH_MNT/a.img
> > +loop_mount=$SCRATCH_MNT/a
> > +truncate -s 100T $loop_file
> > +$MKFS_XFS_PROG $MKFS_OPTIONS -f $loop_file >> $seqres.full
>
> Hmm - that's going to create a 2GB log and zero it, meaning on slow
> devices this is going to take some time.
>
> lodev=$(_create_loop_device $file)
> _mkfs_dev -l size=128m $lodev
<nod>
>
> > +mkdir $loop_mount
> > +mount -o loop -t xfs $loop_file $loop_mount
> > +
> > +echo "Create crazy huge file"
> > +touch "${loop_mount}/a"
> > +blksz="$(stat -f -c '%S' "${loop_mount}")"
> > +MAXEXTLEN=2097151 # cowextsize can't be more than MAXEXTLEN
> > +extsize="$(( ((2 ** 32) - 1) / blksz ))"
> > +test "${extsize}" -gt "${MAXEXTLEN}" && extsize="${MAXEXTLEN}"
> > +extsize_bytes="$(( extsize * blksz ))"
>
> This is overkill, yes? When is extsize_bytes not equal to MAXEXTLEN
> * blksz on this 100TB filesystem?
Most of the time. struct fsxattr.fsx_cowextsize is a u32 field and
expects units of bytes, which means that we have to clamp the hint we
set on any filesystem with larger than 2k blocks.
> > +# Set the largest cowextsize we can
> > +$XFS_IO_PROG -c "cowextsize ${extsize_bytes}" "${loop_mount}/a"
> > +set_cowextsize="$($XFS_IO_PROG -c 'cowextsize' "${loop_mount}/a" | sed -e 's/^.\([0-9]*\).*$/\1/g')"
> > +test "${set_cowextsize}" -eq 0 && _fail "could not set cowextsize?"
>
> Run the test anyway, even if the cowextsize setting fails. WHo knows
> what random crap will fall out....
Ok.
> > +statB="$(stat -c '%B' "${loop_mount}/a")"
> > +
> > +# Write a single byte every cowextsize bytes so that we minimize the space
> > +# required to create maximally sized cow reservations
> > +nr="$(( ((2 ** 32) / extsize) + 100 ))"
>
> What's the magic 2^32 here?
We're relying on cowextsize hints to create oversized speculative
preallocations in the cow fork to bump up i_delayed_blks, so we only
really have to touch a block every extsize_bytes.
>
> > +seq 0 "${nr}" | tac | while read n; do
>
> seq ${nr} -1 0 | while read n; do
Ok
>
> > + off="$((n * extsize * blksz))"
> > + $XFS_IO_PROG -c "pwrite ${off} 1" "${loop_mount}/a" > /dev/null
> > +done
> > +
> > +echo "Reflink crazy huge file"
> > +cp --reflink=always "${loop_mount}/a" "${loop_mount}/b"
> > +
> > +echo "COW crazy huge file"
> > +# Try to create enough maximally sized cow reservations to overflow
> > +# i_delayed_blks
> > +seq 0 "${nr}" | tac | while read n; do
> > + off="$((n * extsize * blksz))"
> > + $XFS_IO_PROG -c "pwrite ${off} 1" "${loop_mount}/a" > /dev/null
> > +done
> > +
> > +echo "Check crazy huge file"
> > +blocks="$(stat -c '%b' "${loop_mount}/a")"
> > +fsblocks="$((blocks * statB / blksz))"
> > +
> > +# Make sure we got enough COW reservations to overflow a 32-bit counter.
> > +$XFS_IO_PROG -c 'bmap -clpv' "${loop_mount}/a" > $tmp.extents
> > +echo "COW EXTENT STATE" >> $seqres.full
> > +cat $tmp.extents >> $seqres.full
> > +cat > $tmp.awk << ENDL
> > +{
> > + if (\$3 == "delalloc") {
> > + x += \$4;
> > + } else if (\$3 == "hole") {
> > + ;
> > + } else {
> > + x += \$6;
> > + }
> > +}
> > +END {
> > + printf("%d\\n", x / ($blksz / 512));
> > +}
> > +ENDL
>
> Write that as a filter function and use tee to direct it to
> seqres.full and the filter function at the same time?
Ok.
> > +cat $tmp.awk >> $seqres.full
> > +cowblocks="$(awk -f $tmp.awk $tmp.extents)"
> > +echo "cowblocks is ${cowblocks}" >> $seqres.full
> > +if [ "${cowblocks}" -lt "$((2 ** 32))" ]; then
> > + echo "cowblocks (${cowblocks}) should be more than 2^32!"
> > +fi
> > +
> > +# And finally, see if i_delayed_blks overflowed.
> > +echo "stat blocks is ${fsblocks}" >> $seqres.full
> > +if [ "${fsblocks}" -lt "$((2 ** 32))" ]; then
> > + echo "stat blocks (${fsblocks}) should be more than 2^32!"
> > + if [ "${cowblocks}" -lt "$((2 ** 32))" ]; then
> > + echo "cowblocks (${cowblocks}) is more than 2^32, your system has overflowed!!!"
> > + fi
> > +fi
>
> _within_tolerance?
Sure? I only care that it's above 2^32 though, not that we have an
exact value ... but I guess we can put fairly wide thresholds on that
comparison since if we overflow then the counter will be way off.
--D
>
> CHeers,
>
> Dave.
> --
> Dave Chinner
> david@xxxxxxxxxxxxx
