Re: [QUESTION] Long read latencies on mixed rw buffered IO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 25, 2019 at 2:10 AM Dave Chinner <david@xxxxxxxxxxxxx> wrote:
>
> On Sun, Mar 24, 2019 at 08:18:10PM +0200, Amir Goldstein wrote:
> > Hi All,
> >
> > Christoph's re-factoring to xfs_ilock() brought up this question,
> > but AFAICS, current behavior seems to have always been that
> > way for xfs (?).
> >
> > Since commit 6552321831dc ("xfs: remove i_iolock and use
> > i_rwsem in the VFS inode instead"), xfs_file_buffered_aio_read()
> > is the only call sites I know of to call generic_file_read_iter() with
> > i_rwsem read side held.
>
> That did not change the locking behaviour of XFS at all.

I know. Said so above.

>
> > This lock is killing performance of multi-threaded buffered
> > read/write mixed workload on the same file [1].
> > Attached output of bcc tools [2] script xfsdist and ext4dist
> > for latency distribution on the same mixed read/write workload.
>
> In future, can you just paste the text in line, rather than attach
> it as base64 encoded attechments? They are kinda hard to quote.
>
> ext4 read :
>
> ....
>     4 -> 7          : 2610
> ....
>  2048 -> 4095       : 232
>  4096 -> 8191       : 632
>  8192 -> 16383      : 925
> 16384 -> 32767      : 408
> ....
>
> ext4 write:
>
>     4 -> 7          : 16732
>     8 -> 15         : 81712
>    16 -> 31         : 121450
>    32 -> 63         : 29638
>
> So about 4500 read IOPS, of which >50% are cache hits.
> And ~250,000 write iops, all in less than 64 microseconds so
> straight into cache. So we are looking at a ~50:1 write to read
> ratio here.
>
> XFS read:
>
>          0 -> 1          : 8
>          2 -> 3          : 21
>          4 -> 7          : 17
>  ....
>       8192 -> 16383      : 4
>      16384 -> 32767      : 8
>      32768 -> 65535      : 17
>      65536 -> 131071     : 55
>     131072 -> 262143     : 41
>     262144 -> 524287     : 104
>     524288 -> 1048575    : 101
>    1048576 -> 2097151    : 34
>  ....
>
> XFS Write:
>          4 -> 7          : 10087
>          8 -> 15         : 34815
>         16 -> 31         : 32446
>         32 -> 63         : 3888
>         64 -> 127        : 155
>  ....
>         <snip long tail>
>
> Which shows ~400 read ops (almost no cache hits)

It's not because of almost no cache hits.
The pattern is the same as in ext4 test.
It's because most reads are blocked on writes in slow path,
as following sample stack stace from offwaketime bcc tool shows:

Tracing blocked time (us) by user + kernel off-CPU and waker stack...

    waker:           filebench 32155
    entry_SYSCALL_64_after_hwframe
    do_syscall_64
    sys_pwrite64
    vfs_write
    __vfs_write
    new_sync_write
    xfs_file_write_iter
    xfs_file_buffered_aio_write
    xfs_iunlock
    up_write
    call_rwsem_wake
    rwsem_wake
    --               --
    finish_task_switch
    schedule
    rwsem_down_read_failed
    call_rwsem_down_read_failed
    down_read
    xfs_ilock
    xfs_file_buffered_aio_read
    xfs_file_read_iter
    new_sync_read
    __vfs_read
    vfs_read
    sys_pread64
    do_syscall_64
    entry_SYSCALL_64_after_hwframe
    pread
    target:          filebench 32147
        109242

> and ~80,000 write
> ops with a long latency tail. It's a roughly a 200:1 write to read
> ratio.
>
> I'm guessing what we are seeing here is a rwsem starvation problem.
> The only reason a read would get delayed for mor ethan a few hundred
> microseconds is ifthere are a continual stream of write holders
> starving pending reads.
>

Yes. That seems to be the case.

> I don't recall it being this bad historically but rwsems have been
> severely performance optimised for various corner cases over the
> past few years and it is extremely likely that behaviour has
> changed.  Definitely needs looking at, but rwsems are so fragile
> these days (highly dependent on memory ordering that nobody seems to
> be able to get right) and impossible to validate as correct that we
> might just end up having to live with it.
>
> FWIW, What kernel did you test this on?

The results above are from kernel 4.20.7-1.el7.elrepo.x86_64.
Your assumption about change of behavior of rwsem over the
years seems to be correct.
The original report we got from customer was with kernel 4.9.134
In the original report, long latencies were on writes rather than on reads.
The following output of filebench randomrw workload summarizes the results:

rand-write1          1128ops       19ops/s   0.1mb/s    340.3ms/op
[0.03ms - 7933.27ms]
rand-read1           2954684ops    49238ops/s 384.7mb/s      0.2ms/op
[0.02ms - 5873.27ms]
61.026: IO Summary: 2955812 ops 49257.253 ops/s 49238/19 rd/wr
384.8mb/s   0.3ms/op

With more recent kernel (4.20), the latencies have shifted to the read ops:

rand-write1          467706ops     7794ops/s  60.9mb/s    0.733ms/op
[0.004ms - 3899.167ms]
rand-read1           1970ops       33ops/s   0.3mb/s  164.277ms/op
[0.017ms - 3905.929ms]
61.032: IO Summary: 469676 ops 7826.760 ops/s 33/7794 rd/wr  61.1mb/s 1.419ms/op

In a workload of 100% reads or 100% writes, there are no extreme
latencies or neither
old nor new kernel.

>
> http://xfs.org/index.php/XFS_FAQ#Q:_What_information_should_I_include_when_reporting_a_problem.3F
>

Granted, I wasn't reported a problem is the traditional sense of "what is
the cause?" - that I know. I was asking why this change between xfs
and other fs.
I gathered a lot of traces and analysis from different tools and on
different kernels
during the investigation, so pouring them at all once would have been counter
productive. I'll happily provide any required analysis per demand.

> > Compared to ext4, avg. read latency on RAID of spindles
> > can be two orders of magnitude higher (>100ms).
> > I can provide more performance numbers if needed with fio,
> > but they won't surprise anyone considering the extra lock.
> >
> > This workload simulates a performance issue we are seeing
> > on deployed systems. There are other ways for us to work
> > around the issue, not using xfs on those systems would be
> > one way, but I wanted to figure out the reason for this
> > behavior first.
>
> The workload is 8 threads doing random 8k random reads and
> 8 threads doing random writes to a single 5GB file?

Yes. To a preallocated file.

>
> I'd be interested in seeing if a fio workload using 16 randrw
> threads demonstrate the same latency profile (i.e. threads aren't
> exclusively read- or write- only), or is profile coming about
> specifically because you have dedicated write-only threads that will
> continually bash on the IO locks and hence starve readers?

I guess it depends on the rw mix. With 50% r/w mix run on kernel
4.20.7-1.el7, long latencies are mostly on the write ops.

Gist of fio output inline and full output attached (Sorry, for folks who
don't like scrolling down):

---XFS---
fio -filename=/xfsfolder/largefile1/00000001/00000001 -direct=0
-iodepth 1 -thread -rw=randrw -rwmixread=50 -ioengine=psync -bs=8k
-size=5G -numjobs=16 -runtime=60 -group_reporting -name=randrw_16th_8k
...
   read: IOPS=264, BW=2117KiB/s (2168kB/s)(124MiB/60045msec)
    clat (usec): min=148, max=491768, avg=39432.35, stdev=23039.80
...
  write: IOPS=268, BW=2149KiB/s (2201kB/s)(126MiB/60045msec)
    clat (usec): min=4, max=477942, avg=20673.33, stdev=26613.06

---EXT4---
fio -filename=/ext4folder/largefile1/00000001/00000001 -direct=0
-iodepth 1 -thread -rw=randrw -rwmixread=50 -ioengine=psync -bs=8k
-size=5G -numjobs=16 -runtime=60 -group_reporting -name=randrw_16th_8k
...
   read: IOPS=1409, BW=11.0MiB/s (11.5MB/s)(662MiB/60100msec)
    clat (usec): min=3, max=1488.6k, avg=11313.66, stdev=22312.95
...
  write: IOPS=1418, BW=11.1MiB/s (11.6MB/s)(666MiB/60100msec)
    clat (usec): min=4, max=7202, avg=19.68, stdev=40.91

>
> > My question is, is the purpose of this lock syncing
> > dio/buffered io?
>
> That's one part of it. The other is POSIX atomic write semantics.
>
> https://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
>
> "I/O is intended to be atomic to ordinary files and pipes and FIFOs.
> Atomic means that all the bytes from a single operation that started
> out together end up together, without interleaving from other I/O
> operations."
>
> i.e. that independent read()s should see a write() as a single
> atomic change. hence if you do a read() concurrently with a write(),
> the read should either run to completion before the write, or the
> write run to completion before the read().
>
> XFS is the only linux filesystem that provides this behaviour.
>
> ext4 and other filesytsems tha thave no buffered read side locking
> provide serialisation at page level, which means an 8kB read racing
> with a 8kB write can return 4k from the new write and 4k from the
> yet-to-be-written part of the file. IOWs, the buffered read gets
> torn.
>

I see... Are you aware of any applications that depend on this POSIX
atomic write behavior? It would seem very unlikely that such applications
exist, if only xfs provides this guaranty on Linux...
IMO, it would be best if applications that desire atomic writes semantics
would opt for it using a preadv2 flag. Or, for backward compat, we can allow
applications to opt out of atomic write semantics. [CC fsdevel]

> > If so, was making this behavior optional via mount option
> > ever considered for xfs?
> > Am I the first one who is asking about this specific workload
> > on xfs (Couldn't found anything on Google), or is this a known
> > issue/trade off/design choice of xfs?
>
> It's an original design feature of XFS. See this 1996 usenix paper
> on XFS, section 6.2 - Performing File I/O , "Using Multiple
> Processes":
>
> "Currently, when using direct I/O and multiple writers, we
> place the burden of serializing writes to the same
> region of the file on the application. This differs from
> traditional Unix file I/O where file writes are atomic
> with respect to other file accesses, and it is one of the
> main reasons why we do not yet support multiple
> writers using traditional Unix file I/O."
>
> i.e. XFS was designed with the intent that buffered writes are
> atomic w.r.t. to all other file accesses. That's not to say we can't
> change it, just that it has always been different to what linux
> native filesystems do. And depending on which set of application
> developers you talk to, you'll get different answers as to whether
> they want write()s to be atomic....
>

All right. I am reading the above as no prior objection to adding
an XFS mount option and/or preadv2() flag to opt out of this
behavior and align with the reckless behavior of the other local
filesystems on Linux.
Please correct me if I am wrong and I would like to hear what
other people thing w.r.t mount option vs. preadv2() flag.
It could also be an open flag, but I prefer not to go down that road...

Thanks,
Amir.
randrw_16th_8k: (g=0): rw=randrw, bs=(R) 8192B-8192B, (W) 8192B-8192B, (T) 8192B-8192B, ioengine=psync, iodepth=1
...
fio-3.1
Starting 16 threads

randrw_16th_8k: (groupid=0, jobs=16): err= 0: pid=5320: Mon Mar 25 03:21:00 2019
   read: IOPS=264, BW=2117KiB/s (2168kB/s)(124MiB/60045msec)
    clat (usec): min=148, max=491768, avg=39432.35, stdev=23039.80
     lat (usec): min=148, max=491768, avg=39432.76, stdev=23039.81
    clat percentiles (msec):
     |  1.00th=[   12],  5.00th=[   18], 10.00th=[   21], 20.00th=[   26],
     | 30.00th=[   29], 40.00th=[   32], 50.00th=[   35], 60.00th=[   39],
     | 70.00th=[   43], 80.00th=[   50], 90.00th=[   64], 95.00th=[   80],
     | 99.00th=[  116], 99.50th=[  133], 99.90th=[  247], 99.95th=[  439],
     | 99.99th=[  485]
   bw (  KiB/s): min=   16, max=  272, per=6.27%, avg=132.82, stdev=48.78, samples=1913
   iops        : min=    2, max=   34, avg=16.60, stdev= 6.10, samples=1913
  write: IOPS=268, BW=2149KiB/s (2201kB/s)(126MiB/60045msec)
    clat (usec): min=4, max=477942, avg=20673.33, stdev=26613.06
     lat (usec): min=4, max=477952, avg=20673.98, stdev=26613.15
    clat percentiles (usec):
     |  1.00th=[     7],  5.00th=[     8], 10.00th=[     8], 20.00th=[    12],
     | 30.00th=[    22], 40.00th=[    31], 50.00th=[ 17957], 60.00th=[ 26346],
     | 70.00th=[ 31851], 80.00th=[ 38011], 90.00th=[ 50594], 95.00th=[ 65799],
     | 99.00th=[103285], 99.50th=[115868], 99.90th=[196084], 99.95th=[270533],
     | 99.99th=[476054]
   bw (  KiB/s): min=   16, max=  384, per=6.27%, avg=134.82, stdev=66.25, samples=1914
   iops        : min=    2, max=   48, avg=16.85, stdev= 8.28, samples=1914
  lat (usec)   : 10=8.31%, 20=6.12%, 50=9.41%, 100=0.68%, 250=0.02%
  lat (usec)   : 500=0.01%, 750=0.01%
  lat (msec)   : 2=0.01%, 4=0.07%, 10=0.27%, 20=5.26%, 50=55.06%
  lat (msec)   : 100=13.19%, 250=1.52%, 500=0.07%
  cpu          : usr=0.03%, sys=0.25%, ctx=41774, majf=0, minf=0
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued rwt: total=15893,16131,0, short=0,0,0, dropped=0,0,0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: bw=2117KiB/s (2168kB/s), 2117KiB/s-2117KiB/s (2168kB/s-2168kB/s), io=124MiB (130MB), run=60045-60045msec
  WRITE: bw=2149KiB/s (2201kB/s), 2149KiB/s-2149KiB/s (2201kB/s-2201kB/s), io=126MiB (132MB), run=60045-60045msec

Disk stats (read/write):
  sdc: ios=15435/10391, merge=0/1, ticks=122505/4115, in_queue=126193, util=98.26%
randrw_16th_8k: (g=0): rw=randrw, bs=(R) 8192B-8192B, (W) 8192B-8192B, (T) 8192B-8192B, ioengine=psync, iodepth=1
...
fio-3.1
Starting 16 threads

randrw_16th_8k: (groupid=0, jobs=16): err= 0: pid=5294: Mon Mar 25 03:15:49 2019
   read: IOPS=1409, BW=11.0MiB/s (11.5MB/s)(662MiB/60100msec)
    clat (usec): min=3, max=1488.6k, avg=11313.66, stdev=22312.95
     lat (usec): min=3, max=1488.6k, avg=11313.90, stdev=22312.95
    clat percentiles (usec):
     |  1.00th=[     5],  5.00th=[     6], 10.00th=[     8], 20.00th=[  3392],
     | 30.00th=[  5145], 40.00th=[  6718], 50.00th=[  8094], 60.00th=[  9503],
     | 70.00th=[ 11338], 80.00th=[ 14484], 90.00th=[ 21103], 95.00th=[ 29754],
     | 99.00th=[ 68682], 99.50th=[109577], 99.90th=[278922], 99.95th=[379585],
     | 99.99th=[893387]
   bw (  KiB/s): min=   32, max= 1202, per=6.30%, avg=710.12, stdev=188.47, samples=1909
   iops        : min=    4, max=  150, avg=88.72, stdev=23.54, samples=1909
  write: IOPS=1418, BW=11.1MiB/s (11.6MB/s)(666MiB/60100msec)
    clat (usec): min=4, max=7202, avg=19.68, stdev=40.91
     lat (usec): min=5, max=7203, avg=20.09, stdev=40.97
    clat percentiles (usec):
     |  1.00th=[    7],  5.00th=[   10], 10.00th=[   12], 20.00th=[   12],
     | 30.00th=[   13], 40.00th=[   15], 50.00th=[   18], 60.00th=[   20],
     | 70.00th=[   22], 80.00th=[   26], 90.00th=[   32], 95.00th=[   37],
     | 99.00th=[   56], 99.50th=[   64], 99.90th=[   91], 99.95th=[  117],
     | 99.99th=[  379]
   bw (  KiB/s): min=   16, max= 1523, per=6.30%, avg=715.24, stdev=247.64, samples=1908
   iops        : min=    2, max=  190, avg=89.36, stdev=30.93, samples=1908
  lat (usec)   : 4=0.02%, 10=8.31%, 20=29.16%, 50=17.64%, 100=0.69%
  lat (usec)   : 250=0.04%, 500=0.66%, 750=0.08%, 1000=0.02%
  lat (msec)   : 2=0.55%, 4=4.52%, 10=20.33%, 20=12.50%, 50=4.56%
  lat (msec)   : 100=0.63%, 250=0.21%, 500=0.05%, 750=0.01%, 1000=0.01%
  lat (msec)   : 2000=0.01%
  cpu          : usr=0.09%, sys=0.48%, ctx=75050, majf=0, minf=0
  IO depths    : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued rwt: total=84702,85250,0, short=0,0,0, dropped=0,0,0
     latency   : target=0, window=0, percentile=100.00%, depth=1

Run status group 0 (all jobs):
   READ: bw=11.0MiB/s (11.5MB/s), 11.0MiB/s-11.0MiB/s (11.5MB/s-11.5MB/s), io=662MiB (694MB), run=60100-60100msec
  WRITE: bw=11.1MiB/s (11.6MB/s), 11.1MiB/s-11.1MiB/s (11.6MB/s-11.6MB/s), io=666MiB (698MB), run=60100-60100msec

Disk stats (read/write):
  sdb: ios=74911/60641, merge=0/13, ticks=950347/34711, in_queue=987372, util=100.00%

[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux