From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
Add support for the copy_file_range system call to fsx.
Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
[dchinner: copy_file_range() needs to obey read/write constraints
otherwise is blows up when direct IO is used]
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
ltp/fsx.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 148 insertions(+), 2 deletions(-)
diff --git a/ltp/fsx.c b/ltp/fsx.c
index 577c7309..92e4c30f 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -34,6 +34,7 @@
#ifdef AIO
#include <libaio.h>
#endif
+#include <sys/syscall.h>
#ifndef MAP_FILE
# define MAP_FILE 0
@@ -106,6 +107,7 @@ enum {
OP_INSERT_RANGE,
OP_CLONE_RANGE,
OP_DEDUPE_RANGE,
+ OP_COPY_RANGE,
OP_MAX_FULL,
/* integrity operations */
@@ -169,6 +171,7 @@ int mapped_reads = 1; /* -R flag disables it */
int check_file = 0; /* -X flag enables */
int clone_range_calls = 1; /* -J flag disables */
int dedupe_range_calls = 1; /* -B flag disables */
+int copy_range_calls = 1; /* -E flag disables */
int integrity = 0; /* -i flag */
int fsxgoodfd = 0;
int o_direct; /* -Z */
@@ -264,6 +267,7 @@ static const char *op_names[] = {
[OP_INSERT_RANGE] = "insert_range",
[OP_CLONE_RANGE] = "clone_range",
[OP_DEDUPE_RANGE] = "dedupe_range",
+ [OP_COPY_RANGE] = "copy_range",
[OP_FSYNC] = "fsync",
};
@@ -477,6 +481,20 @@ logdump(void)
else if (overlap2)
prt("\t******BBBB");
break;
+ case OP_COPY_RANGE:
+ prt("COPY 0x%x thru 0x%x\t(0x%x bytes) to 0x%x thru 0x%x",
+ lp->args[0], lp->args[0] + lp->args[1] - 1,
+ lp->args[1],
+ lp->args[2], lp->args[2] + lp->args[1] - 1);
+ overlap2 = badoff >= lp->args[2] &&
+ badoff < lp->args[2] + lp->args[1];
+ if (overlap && overlap2)
+ prt("\tEEEE**EEEE");
+ else if (overlap)
+ prt("\tEEEE******");
+ else if (overlap2)
+ prt("\t******EEEE");
+ break;
case OP_FSYNC:
prt("FSYNC");
break;
@@ -1539,6 +1557,99 @@ do_dedupe_range(unsigned offset, unsigned length, unsigned dest)
}
#endif
+#ifdef HAVE_COPY_FILE_RANGE
+int
+test_copy_range(void)
+{
+ loff_t o1 = 0, o2 = 0;
+
+ if (copy_file_range(fd, &o1, fd, &o2, 0, 0) == -1 &&
+ (errno == EOPNOTSUPP || errno == ENOTTY)) {
+ if (!quiet)
+ fprintf(stderr,
+ "main: filesystem does not support "
+ "copy range, disabling!\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+void
+do_copy_range(unsigned offset, unsigned length, unsigned dest)
+{
+ loff_t o1, o2;
+ ssize_t nr;
+
+ offset -= offset % readbdy;
+ dest -= dest % writebdy;
+ if (o_direct)
+ length -= length % readbdy;
+
+ if (length == 0) {
+ if (!quiet && testcalls > simulatedopcount)
+ prt("skipping zero length copy range\n");
+ log5(OP_COPY_RANGE, offset, length, dest, FL_SKIPPED);
+ return;
+ }
+
+ if ((loff_t)offset >= file_size) {
+ if (!quiet && testcalls > simulatedopcount)
+ prt("skipping copy range behind EOF\n");
+ log5(OP_COPY_RANGE, offset, length, dest, FL_SKIPPED);
+ return;
+ }
+
+ if (dest + length > biggest) {
+ biggest = dest + length;
+ if (!quiet && testcalls > simulatedopcount)
+ prt("copying to largest ever: 0x%x\n", dest + length);
+ }
+
+ log5(OP_COPY_RANGE, offset, length, dest, FL_NONE);
+
+ if (testcalls <= simulatedopcount)
+ return;
+
+ if ((progressinterval && testcalls % progressinterval == 0) ||
+ (debug && (monitorstart == -1 || monitorend == -1 ||
+ dest <= monitorstart || dest + length <= monitorend))) {
+ prt("%lu copy\tfrom 0x%x to 0x%x, (0x%x bytes) at 0x%x\n",
+ testcalls, offset, offset+length, length, dest);
+ }
+
+ o1 = offset;
+ o2 = dest;
+
+ nr = copy_file_range(fd, &o1, fd, &o2, length, 0);
+ if (nr == -1) {
+ prt("copy range: 0x%x to 0x%x at 0x%x\n", offset,
+ offset + length, dest);
+ prterr("do_copy_range:");
+ report_failure(161);
+ }
+
+ memcpy(good_buf + dest, good_buf + offset, nr);
+ if (dest > file_size)
+ memset(good_buf + file_size, '\0', dest - file_size);
+ if (dest + nr > file_size)
+ file_size = dest + nr;
+}
+
+#else
+int
+test_copy_range(void)
+{
+ return 0;
+}
+
+void
+do_copy_range(unsigned offset, unsigned length, unsigned dest)
+{
+ return;
+}
+#endif
+
#ifdef HAVE_LINUX_FALLOC_H
/* fallocate is basically a no-op unless extending, then a lot like a truncate */
void
@@ -1698,6 +1809,7 @@ op_args_count(int operation)
switch (operation) {
case OP_CLONE_RANGE:
case OP_DEDUPE_RANGE:
+ case OP_COPY_RANGE:
return 4;
default:
return 3;
@@ -1872,6 +1984,14 @@ test(void)
offset2 + size > file_size);
break;
}
+ case OP_COPY_RANGE:
+ TRIM_OFF_LEN(offset, size, file_size);
+ do {
+ offset2 = random();
+ TRIM_OFF(offset2, maxfilelen);
+ } while (llabs(offset2 - offset) < size ||
+ offset2 + size > maxfilelen);
+ break;
}
have_op:
@@ -1927,6 +2047,12 @@ test(void)
goto out;
}
break;
+ case OP_COPY_RANGE:
+ if (!copy_range_calls) {
+ log5(op, offset, size, offset2, FL_SKIPPED);
+ goto out;
+ }
+ break;
}
switch (op) {
@@ -2017,6 +2143,18 @@ test(void)
do_dedupe_range(offset, size, offset2);
break;
+ case OP_COPY_RANGE:
+ if (size == 0) {
+ log5(OP_COPY_RANGE, offset, size, offset2, FL_SKIPPED);
+ goto out;
+ }
+ if (offset2 + size > maxfilelen) {
+ log5(OP_COPY_RANGE, offset, size, offset2, FL_SKIPPED);
+ goto out;
+ }
+
+ do_copy_range(offset, size, offset2);
+ break;
case OP_FSYNC:
dofsync();
break;
@@ -2042,7 +2180,7 @@ void
usage(void)
{
fprintf(stdout, "usage: %s",
- "fsx [-dknqxABFJLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
+ "fsx [-dknqxABEFJLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
-b opnum: beginning operation number (default 1)\n\
-c P: 1 in P chance of file close+open at each op (default infinity)\n\
-d: debug output for all operations\n\
@@ -2089,6 +2227,9 @@ usage(void)
#ifdef FIDEDUPERANGE
" -B: Do not use dedupe range calls\n"
#endif
+#ifdef HAVE_COPY_FILE_RANGE
+" -E: Do not use copy range calls\n"
+#endif
" -L: fsxLite - no file creations & no file size changes\n\
-N numops: total # operations to do (default infinity)\n\
-O: use oplen (see -o flag) for every op (default random)\n\
@@ -2292,7 +2433,7 @@ main(int argc, char **argv)
setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
while ((ch = getopt_long(argc, argv,
- "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyABD:FJKHzCILN:OP:RS:WXZ",
+ "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyABD:EFJKHzCILN:OP:RS:WXZ",
longopts, NULL)) != EOF)
switch (ch) {
case 'b':
@@ -2428,6 +2569,9 @@ main(int argc, char **argv)
case 'B':
dedupe_range_calls = 0;
break;
+ case 'E':
+ copy_range_calls = 0;
+ break;
case 'L':
lite = 1;
o_flags &= ~(O_CREAT|O_TRUNC);
@@ -2650,6 +2794,8 @@ main(int argc, char **argv)
clone_range_calls = test_clone_range();
if (dedupe_range_calls)
dedupe_range_calls = test_dedupe_range();
+ if (copy_range_calls)
+ copy_range_calls = test_copy_range();
while (numops == -1 || numops--)
if (!test())
