Re: [PATCH 05/10] fsx: add clone range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 20, 2018 at 01:57:12PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> 
> Add support for FICLONERANGE to fsx.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> ---
>  ltp/fsx.c |  133 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 128 insertions(+), 5 deletions(-)
> 
> 
> diff --git a/ltp/fsx.c b/ltp/fsx.c
> index 2372964d..a1a44b23 100644
> --- a/ltp/fsx.c
> +++ b/ltp/fsx.c
> @@ -104,6 +104,7 @@ enum {
>  	OP_ZERO_RANGE,
>  	OP_COLLAPSE_RANGE,
>  	OP_INSERT_RANGE,
> +	OP_CLONE_RANGE,
>  	OP_MAX_FULL,
>  
>  	/* integrity operations */
> @@ -165,6 +166,7 @@ int	collapse_range_calls = 1;	/* -C flag disables */
>  int	insert_range_calls = 1;		/* -I flag disables */
>  int	mapped_reads = 1;		/* -R flag disables it */
>  int	check_file = 1;			/* -X flag disables */
> +int	clone_range_calls = 1;		/* -J flag disables */
>  int	integrity = 0;			/* -i flag */
>  int	fsxgoodfd = 0;
>  int	o_direct;			/* -Z */
> @@ -258,6 +260,7 @@ static const char *op_names[] = {
>  	[OP_ZERO_RANGE] = "zero_range",
>  	[OP_COLLAPSE_RANGE] = "collapse_range",
>  	[OP_INSERT_RANGE] = "insert_range",
> +	[OP_CLONE_RANGE] = "clone_range",
>  	[OP_FSYNC] = "fsync",
>  };
>  
> @@ -320,7 +323,6 @@ log4(int operation, int arg0, int arg1, enum opflags flags)
>  		logptr = 0;
>  }
>  
> -
>  void
>  logdump(void)
>  {
> @@ -342,7 +344,7 @@ logdump(void)
>  		count = LOGSIZE;
>  	}
>  	for ( ; count > 0; count--) {
> -		bool overlap;
> +		bool overlap, overlap2;
>  		int opnum;
>  
>  		opnum = i+1 + (logcount/LOGSIZE)*LOGSIZE;
> @@ -444,6 +446,20 @@ logdump(void)
>  			if (overlap)
>  				prt("\t******IIII");
>  			break;
> +		case OP_CLONE_RANGE:
> +			prt("CLONE 0x%x thru 0x%x\t(0x%x bytes) to 0x%x thru 0x%x",
> +			    lp->args[0], lp->args[0] + lp->args[1] - 1,
> +			    lp->args[1],
> +			    lp->args[2], lp->args[2] + lp->args[1] - 1);
> +			overlap2 = badoff >= lp->args[2] &&
> +				  badoff < lp->args[2] + lp->args[1];
> +			if (overlap && overlap2)
> +				prt("\tJJJJ**JJJJ");
> +			else if (overlap)
> +				prt("\tJJJJ******");
> +			else if (overlap2)
> +				prt("\t******JJJJ");
> +			break;
>  		case OP_FSYNC:
>  			prt("FSYNC");
>  			break;
> @@ -1285,6 +1301,73 @@ do_insert_range(unsigned offset, unsigned length)
>  }
>  #endif
>  
> +#ifdef FICLONERANGE
> +void
> +do_clone_range(unsigned offset, unsigned length, unsigned dest)
> +{
> +	struct file_clone_range	fcr;
> +
> +	if (length == 0) {
> +		if (!quiet && testcalls > simulatedopcount)
> +			prt("skipping zero length clone range\n");
> +		log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> +		return;
> +	}
> +
> +	if ((loff_t)offset >= file_size) {
> +		if (!quiet && testcalls > simulatedopcount)
> +			prt("skipping clone range behind EOF\n");
> +		log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> +		return;
> +	}
> +
> +	log5(OP_CLONE_RANGE, offset, length, dest, FL_NONE);
> +
> +	if (testcalls <= simulatedopcount)
> +		return;
> +
> +	if ((progressinterval && testcalls % progressinterval == 0) ||
> +	    (debug && (monitorstart == -1 || monitorend == -1 ||
> +		       dest <= monitorstart || dest + length <= monitorend))) {
> +		prt("%lu clone\tfrom 0x%x to 0x%x, (0x%x bytes) at 0x%x\n",
> +			testcalls, offset, offset+length, length, dest);
> +	}
> +
> +	fcr.src_fd = fd;
> +	fcr.src_offset = offset;
> +	fcr.src_length = length;
> +	fcr.dest_offset = dest;
> +
> +	if (ioctl(fd, FICLONERANGE, &fcr) == -1) {
> +		if (errno == EOPNOTSUPP || errno == ENOTTY) {
> +			if (!quiet && testcalls > simulatedopcount)
> +				prt("skipping unsupported clone range\n");
> +			logptr--;

NAK, we should just have a test_clone_range that we can use to disable
clone range calls before we start generating calls, because oplog[] is a
rolling buffer and this can cause internal memory corruption if logptr
is 0.

--D

> +			log5(OP_CLONE_RANGE, offset, length, dest, FL_SKIPPED);
> +			return;
> +		}
> +
> +		prt("clone range: 0x%x to 0x%x at 0x%x\n", offset,
> +				offset + length, dest);
> +		prterr("do_clone_range: FICLONERANGE");
> +		report_failure(161);
> +	}
> +
> +	memcpy(good_buf + dest, good_buf + offset, length);
> +	if (dest > file_size)
> +		memset(good_buf + file_size, '\0', dest - file_size);
> +	if (dest + length > file_size)
> +		file_size = dest + length;
> +}
> +
> +#else
> +void
> +do_clone_range(unsigned offset, unsigned length, unsigned dest)
> +{
> +	return;
> +}
> +#endif
> +
>  #ifdef HAVE_LINUX_FALLOC_H
>  /* fallocate is basically a no-op unless extending, then a lot like a truncate */
>  void
> @@ -1442,6 +1525,8 @@ static int
>  op_args_count(int operation)
>  {
>  	switch (operation) {
> +	case OP_CLONE_RANGE:
> +		return 4;
>  	default:
>  		return 3;
>  	}
> @@ -1450,6 +1535,7 @@ op_args_count(int operation)
>  static int
>  read_op(struct log_entry *log_entry)
>  {
> +	char *end;
>  	char line[256];
>  
>  	memset(log_entry, 0, sizeof(*log_entry));
> @@ -1515,7 +1601,7 @@ read_op(struct log_entry *log_entry)
>  int
>  test(void)
>  {
> -	unsigned long	offset;
> +	unsigned long	offset, offset2;
>  	unsigned long	size;
>  	unsigned long	rv;
>  	unsigned long	op;
> @@ -1546,6 +1632,7 @@ test(void)
>  			op = log_entry.operation;
>  			offset = log_entry.args[0];
>  			size = log_entry.args[1];
> +			offset2 = log_entry.args[2];
>  			closeopen = !!(log_entry.flags & FL_CLOSE_OPEN);
>  			keep_size = !!(log_entry.flags & FL_KEEP_SIZE);
>  			goto have_op;
> @@ -1558,6 +1645,7 @@ test(void)
>  		closeopen = (rv >> 3) < (1 << 28) / closeprob;
>  
>  	offset = random();
> +	offset2 = 0;
>  	size = maxoplen;
>  	if (randomoplen)
>  		size = random() % (maxoplen + 1);
> @@ -1583,6 +1671,17 @@ test(void)
>  		if (zero_range_calls && size && keep_size_calls)
>  			keep_size = random() % 2;
>  		break;
> +	case OP_CLONE_RANGE:
> +		TRIM_OFF_LEN(offset, size, file_size);
> +		offset = offset & ~(block_size - 1);
> +		size = size & ~(block_size - 1);
> +		do {
> +			offset2 = random();
> +			TRIM_OFF(offset2, maxfilelen);
> +			offset2 = offset2 & ~(block_size - 1);
> +		} while (llabs(offset2 - offset) < size ||
> +			 offset2 + size > maxfilelen);
> +		break;
>  	}
>  
>  have_op:
> @@ -1626,6 +1725,12 @@ test(void)
>  			goto out;
>  		}
>  		break;
> +	case OP_CLONE_RANGE:
> +		if (!clone_range_calls) {
> +			log5(op, offset, size, offset2, FL_SKIPPED);
> +			goto out;
> +		}
> +		break;
>  	}
>  
>  	switch (op) {
> @@ -1692,6 +1797,18 @@ test(void)
>  
>  		do_insert_range(offset, size);
>  		break;
> +	case OP_CLONE_RANGE:
> +		if (size == 0) {
> +			log5(OP_CLONE_RANGE, offset, size, offset2, FL_SKIPPED);
> +			goto out;
> +		}
> +		if (offset2 + size > maxfilelen) {
> +			log5(OP_CLONE_RANGE, offset, size, offset2, FL_SKIPPED);
> +			goto out;
> +		}
> +
> +		do_clone_range(offset, size, offset2);
> +		break;
>  	case OP_FSYNC:
>  		dofsync();
>  		break;
> @@ -1717,7 +1834,7 @@ void
>  usage(void)
>  {
>  	fprintf(stdout, "usage: %s",
> -		"fsx [-dknqxAFLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
> +		"fsx [-dknqxAFJLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
>  	-b opnum: beginning operation number (default 1)\n\
>  	-c P: 1 in P chance of file close+open at each op (default infinity)\n\
>  	-d: debug output for all operations\n\
> @@ -1758,6 +1875,9 @@ usage(void)
>  #ifdef FALLOC_FL_INSERT_RANGE
>  "	-I: Do not use insert range calls\n"
>  #endif
> +#ifdef FICLONERANGE
> +"	-J: Do not use clone range calls\n"
> +#endif
>  "	-L: fsxLite - no file creations & no file size changes\n\
>  	-N numops: total # operations to do (default infinity)\n\
>  	-O: use oplen (see -o flag) for every op (default random)\n\
> @@ -1961,7 +2081,7 @@ main(int argc, char **argv)
>  	setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
>  
>  	while ((ch = getopt_long(argc, argv,
> -				 "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyAD:FKHzCILN:OP:RS:WXZ",
> +				 "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyAD:FJKHzCILN:OP:RS:WXZ",
>  				 longopts, NULL)) != EOF)
>  		switch (ch) {
>  		case 'b':
> @@ -2091,6 +2211,9 @@ main(int argc, char **argv)
>  		case 'I':
>  			insert_range_calls = 0;
>  			break;
> +		case 'J':
> +			clone_range_calls = 0;
> +			break;
>  		case 'L':
>  		        lite = 1;
>  			o_flags &= ~(O_CREAT|O_TRUNC);
> 



[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux