Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hello all,
  Any thoughts for this patch? Adding chandan@xxxxxxxxxxxxxxxxxx to cc list for review. 
Because his patch "xfs/050: work with 64k block size" change the bsoft and bhard size.

Thanks.

----- Original Message -----
> From: "Eryu Guan" <guaneryu@xxxxxxxxx>
> To: "XiaoLi Feng" <xifeng@xxxxxxxxxx>
> Cc: esandeen@xxxxxxxxxx, jmoyer@xxxxxxxxxx, fstests@xxxxxxxxxxxxxxx, xzhou@xxxxxxxxxx, linux-xfs@xxxxxxxxxxxxxxx
> Sent: Monday, November 5, 2018 12:15:54 AM
> Subject: Re: [PATCH v1] xfs/050: make it passed for dax 2 MiB alignment test
> 
> On Fri, Oct 26, 2018 at 10:47:54AM +0800, Xiaoli Feng wrote:
> > From: xiaoli feng <xifeng@xxxxxxxxxx>
> > 
> > This case is failed for dax 2MiB alignment test. When test "push past
> > the hard block limit" in this case, the quota bhard is 4000kb, and
> > try to create 4096kb in dax fs. dax only create 2048kb because of 2MiB
> > alignment. But there is a check that the file size must > 3400kb(bhard
> > * 85%). So there are two method to fix it. One is to decrease bhard
> > size. Second is to descreate minimum size. The minimum is hard to define.
> > So I choose first method.
> 
> Adding linux-xfs to cc list for review from xfs folks. Thanks a lot!
> 
> Eryu
> 
> > ---
> >  tests/xfs/050     |  4 ++--
> >  tests/xfs/050.out | 60
> >  +++++++++++++++++++++++++++----------------------------
> >  2 files changed, 32 insertions(+), 32 deletions(-)
> > 
> > diff --git a/tests/xfs/050 b/tests/xfs/050
> > index 788ed7f..d2ca477 100755
> > --- a/tests/xfs/050
> > +++ b/tests/xfs/050
> > @@ -43,8 +43,8 @@ _scratch_mount
> >  bsize=$(_get_file_block_size $SCRATCH_MNT)
> >  _scratch_unmount
> >  
> > -bsoft=$(( 200 * $bsize ))
> > -bhard=$(( 1000 * $bsize ))
> > +bsoft=$(( 100 * $bsize ))
> > +bhard=$(( 500 * $bsize ))
> >  isoft=4
> >  ihard=10
> >  
> > diff --git a/tests/xfs/050.out b/tests/xfs/050.out
> > index 725cd79..6a7af1a 100644
> > --- a/tests/xfs/050.out
> > +++ b/tests/xfs/050.out
> > @@ -12,23 +12,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >  
> >  *** report initial settings
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft inode limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the soft block limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the hard inode limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the hard block limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** unmount
> >  *** group
> > @@ -44,23 +44,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >  
> >  *** report initial settings
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft inode limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the soft block limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the hard inode limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the hard block limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] =OK= 200 1000 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] =OK= 100 500 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** unmount
> >  *** uqnoenforce
> > @@ -76,23 +76,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >  
> >  *** report initial settings
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft inode limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft block limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the hard inode limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> >  
> >  *** push past the hard block limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> >  
> >  *** unmount
> >  *** gqnoenforce
> > @@ -108,23 +108,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >  
> >  *** report initial settings
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft inode limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft block limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the hard inode limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> >  
> >  *** push past the hard block limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> >  
> >  *** unmount
> >  *** pquota
> > @@ -140,23 +140,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >  
> >  *** report initial settings
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft inode limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the soft block limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the hard inode limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** push past the hard block limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] =OK= 200 1000 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> > +[NAME] =OK= 100 500 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
> >  
> >  *** unmount
> >  *** pqnoenforce
> > @@ -172,22 +172,22 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> >  
> >  *** report initial settings
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft inode limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 0 200 1000 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 0 100 500 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the soft block limit
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> > +[NAME] 300 100 500 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
> >  
> >  *** push past the hard inode limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 300 200 1000 00 [--------] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 300 100 500 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
> >  
> >  *** push past the hard block limit (expect EDQUOT)
> >  [ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
> > -[NAME] 1200 200 1000 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> > +[NAME] 1200 100 500 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00
> > [--------]
> >  
> >  *** unmount
> > --
> > 1.8.3.1
> > 
>
[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]

  Powered by Linux