Re: [PATCH 6/6] generic: test reflink side effects

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 04, 2018 at 05:19:45PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> 
> Test that ctime gets updated and suid is cleared when we reflink.
> Ensure we can't reflink about RLIMIT_FSIZE.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> ---
>  tests/generic/934     |   63 ++++++++++++++++++++++++++++++++++++++
>  tests/generic/934.out |    2 +
>  tests/generic/935     |   48 +++++++++++++++++++++++++++++
>  tests/generic/935.out |    2 +
>  tests/generic/936     |   70 ++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/936.out |    5 +++
>  tests/generic/937     |   81 +++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/937.out |   12 +++++++
>  tests/generic/group   |    4 ++
>  9 files changed, 287 insertions(+)
>  create mode 100755 tests/generic/934
>  create mode 100644 tests/generic/934.out
>  create mode 100755 tests/generic/935
>  create mode 100644 tests/generic/935.out
>  create mode 100755 tests/generic/936
>  create mode 100644 tests/generic/936.out
>  create mode 100755 tests/generic/937
>  create mode 100644 tests/generic/937.out
> 
> 
> diff --git a/tests/generic/934 b/tests/generic/934
> new file mode 100755
> index 00000000..ec7ad092
> --- /dev/null
> +++ b/tests/generic/934
> @@ -0,0 +1,63 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2018 Oracle, Inc.  All Rights Reserved.
> +#
> +# FS QA Test No. 934
> +#
> +# Ensure that ctime is updated and capabilities are cleared when reflinking.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch_reflink
> +_require_command "$GETCAP_PROG" getcap
> +_require_command "$SETCAP_PROG" setcap
> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount
> +
> +$XFS_IO_PROG -f -c "pwrite -S 0x18 0 1m" $SCRATCH_MNT/foo >>$seqres.full
> +$XFS_IO_PROG -f -c "pwrite -S 0x20 0 1m" $SCRATCH_MNT/bar >>$seqres.full
> +
> +$SETCAP_PROG cap_setgid,cap_setuid+ep $SCRATCH_MNT/bar
> +
> +before_cap="$($GETCAP_PROG -v $SCRATCH_MNT/bar)"
> +before_ctime="$(stat -c '%z' $SCRATCH_MNT/bar)"
> +
> +sleep 1
> +
> +$XFS_IO_PROG -c "reflink $SCRATCH_MNT/foo" $SCRATCH_MNT/bar >> $seqres.full 2>&1
> +#trace-cmd record -p function_graph -l 'file_remove_privs' -g 'file_remove_privs' $XFS_IO_PROG -c "reflink $SCRATCH_MNT/foo" $SCRATCH_MNT/bar >> $seqres.full 2>&1

Debug trace-cmd command?

> +
> +after_cap="$($GETCAP_PROG -v $SCRATCH_MNT/bar)"
> +after_ctime="$(stat -c '%z' $SCRATCH_MNT/bar)"
> +
> +echo "$before_cap $before_ctime" >> $seqres.full
> +echo "$after_cap $after_ctime" >> $seqres.full
> +
> +test "$before_cap" != "$after_cap" || echo "Expected capabilities to drop."
> +test "$before_ctime" != "$after_ctime" || echo "Expected ctime to change."
> +
> +echo Silence is golden.
> +status=0
> +exit
> diff --git a/tests/generic/934.out b/tests/generic/934.out
> new file mode 100644
> index 00000000..98f0bb3f
> --- /dev/null
> +++ b/tests/generic/934.out
> @@ -0,0 +1,2 @@
> +QA output created by 934
> +Silence is golden.
> diff --git a/tests/generic/935 b/tests/generic/935
> new file mode 100755
> index 00000000..3b0eaa95
> --- /dev/null
> +++ b/tests/generic/935
> @@ -0,0 +1,48 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2018 Oracle, Inc.  All Rights Reserved.
> +#
> +# FS QA Test No. 935
> +#
> +# Ensure that file size resource limits are respected when reflinking.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch_reflink

_require_user

> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount
> +
> +chmod a+rwx $SCRATCH_MNT
> +$XFS_IO_PROG -f -c "pwrite -S 0x18 0 1m" $SCRATCH_MNT/foo >>$seqres.full
> +su -s/bin/bash - $qa_user -c "ulimit -f 64 ; $XFS_IO_PROG -f -c \"reflink $SCRATCH_MNT/foo\" $SCRATCH_MNT/bar" >> $seqres.full 2>&1
> +
> +sz="$(stat -c '%s' $SCRATCH_MNT/bar)"
> +if [ "$sz" -ne 0 ] && [ "$sz" -ne 65536 ]; then
> +	echo "Oddball file size $sz??"
> +fi
> +
> +echo Silence is golden.
> +status=0
> +exit
> diff --git a/tests/generic/935.out b/tests/generic/935.out
> new file mode 100644
> index 00000000..adb5e92a
> --- /dev/null
> +++ b/tests/generic/935.out
> @@ -0,0 +1,2 @@
> +QA output created by 935
> +Silence is golden.
> diff --git a/tests/generic/936 b/tests/generic/936
> new file mode 100755
> index 00000000..eacf9b5e
> --- /dev/null
> +++ b/tests/generic/936
> @@ -0,0 +1,70 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2018 Oracle, Inc.  All Rights Reserved.
> +#
> +# FS QA Test No. 936
> +#
> +# Ensure that reflinking into a file well beyond EOF zeroes everything between
> +# the old EOF and the start of the newly linked chunk.  This is an adaptation
> +# of a reproducer script that Eric Sandeen formulated from a stale data
> +# exposure bug uncovered by shared/010.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch_reflink
> +
> +rm -f $seqres.full
> +
> +# Fill disk with a well known pattern so that stale data exposure becomes much
> +# more obvious.
> +$XFS_IO_PROG -c "pwrite -S 0x58 -b 1m 0 300m" $SCRATCH_DEV >> $seqres.full
> +_scratch_mkfs_sized $((300 * 1048576)) >>$seqres.full 2>&1
> +_scratch_mount
> +
> +DONOR1=$SCRATCH_MNT/a
> +TARGET=$SCRATCH_MNT/b
> +blksz=65536
> +
> +$XFS_IO_PROG -f -c "pwrite -S 0x72 0 $blksz" $DONOR1 >> $seqres.full
> +
> +$XFS_IO_PROG -f \
> +	-c "falloc -k $((blksz*2)) $blksz"        \
> +	-c "pwrite -S 0x57 $((blksz*16)) 8192" \
> +        -c "fdatasync" \

Looks like an indention issue here.

> +	-c 'stat' \
> +	-c "reflink $DONOR1 0 $((blksz*17)) $blksz" \
> +                $TARGET >> $seqres.full
> +
> +od -tx1 -Ad -c $TARGET >> $seqres.full
> +${FILEFRAG_PROG} -v $TARGET >> $seqres.full

Seems like this filefrag is only here for debug purpose, and we could
through away the stderr output if filefrag is not installed, so we don't
have to _require_command for filefrag.

> +md5sum $DONOR1 | _filter_scratch
> +md5sum $TARGET | _filter_scratch
> +
> +_scratch_cycle_mount
> +
> +od -tx1 -Ad -c $TARGET >> $seqres.full
> +${FILEFRAG_PROG} -v $TARGET >> $seqres.full
> +md5sum $DONOR1 | _filter_scratch
> +md5sum $TARGET | _filter_scratch
> +
> +status=0
> +exit
> diff --git a/tests/generic/936.out b/tests/generic/936.out
> new file mode 100644
> index 00000000..73685490
> --- /dev/null
> +++ b/tests/generic/936.out
> @@ -0,0 +1,5 @@
> +QA output created by 936
> +34a4daf52c562253a2f6108c5123605a  SCRATCH_MNT/a
> +4fe4dfe3d2244bd380adcefdc5006e37  SCRATCH_MNT/b
> +34a4daf52c562253a2f6108c5123605a  SCRATCH_MNT/a
> +4fe4dfe3d2244bd380adcefdc5006e37  SCRATCH_MNT/b
> diff --git a/tests/generic/937 b/tests/generic/937
> new file mode 100755
> index 00000000..e3a94dbb
> --- /dev/null
> +++ b/tests/generic/937
> @@ -0,0 +1,81 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2018, Oracle and/or its affiliates.  All Rights Reserved.
> +#
> +# FS QA Test No. 937
> +#
> +# Ensuring that we cannot dedupe non-matching parts of files:
> +#   - Fail to dedupe non-identical parts of two different files
> +#   - Check that nothing changes in either file
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +    cd /
> +    rm -rf $tmp.* $testdir
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# real QA test starts here
> +_supported_os Linux
> +_require_test_dedupe
> +
> +rm -f $seqres.full
> +
> +testdir=$TEST_DIR/test-$seq
> +rm -rf $testdir
> +mkdir $testdir
> +
> +echo "Create the original files"
> +blksz=65536
> +_pwrite_byte 0x61 $((blksz * 2)) $((blksz * 6)) $testdir/file1 >> $seqres.full
> +_pwrite_byte 0x61 $((blksz * 2)) $((blksz * 6)) $testdir/file2 >> $seqres.full
> +_pwrite_byte 0x62 $(((blksz * 6) - 33)) 1 $testdir/file2 >> $seqres.full
> +_test_cycle_mount
> +
> +md5sum $testdir/file1 | _filter_test_dir
> +md5sum $testdir/file2 | _filter_test_dir
> +
> +_compare_range $testdir/file1 0 $testdir/file2 0 "$((blksz * 8))" \
> +       || echo "Files 1-2 do not match (intentional)"
> +
> +echo "(partial) dedupe the middle blocks together"
> +free_before=$(stat -f -c '%a' $testdir)
> +_dedupe_range $testdir/file1 $((blksz * 4)) $testdir/file2 \
> +		$((blksz * 4)) $((blksz * 2)) 2>&1 | _filter_xfs_io_numbers | _filter_dedupe_error
> +_test_cycle_mount
> +${FILEFRAG_PROG} -v $testdir/file1 >> $seqres.full
> +${FILEFRAG_PROG} -v $testdir/file2 >> $seqres.full
> +free_after=$(stat -f -c '%a' $testdir)
> +echo "freesp changed by $free_before -> $free_after" >> $seqres.full
> +
> +echo "Compare sections"
> +md5sum $testdir/file1 | _filter_test_dir
> +md5sum $testdir/file2 | _filter_test_dir
> +
> +_compare_range $testdir/file1 0 $testdir/file2 0 $((blksz * 4)) \
> +       || echo "Start sections do not match (error)"
> +
> +_compare_range $testdir/file1 $((blksz * 4)) $testdir/file2 \
> +		$((blksz * 4)) $((blksz * 2)) \
> +       || echo "Middle sections do not match (intentional)"
> +
> +_compare_range $testdir/file1 $((blksz * 6)) $testdir/file2 \
> +		$((blksz * 6)) $((blksz * 2)) \
> +       || echo "End sections do not match (error)"
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/generic/937.out b/tests/generic/937.out
> new file mode 100644
> index 00000000..496975d6
> --- /dev/null
> +++ b/tests/generic/937.out
> @@ -0,0 +1,12 @@
> +QA output created by 937
> +Create the original files
> +35ac8d7917305c385c30f3d82c30a8f6  TEST_DIR/test-937/file1
> +39578c21e2cb9f6049b1cf7fc7be12a6  TEST_DIR/test-937/file2
> +Files 1-2 do not match (intentional)
> +(partial) dedupe the middle blocks together
> +deduped XXXX/XXXX bytes at offset XXXX
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)

I hit failure like:

-deduped XXXX/XXXX bytes at offset XXXX
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+XFS_IOC_FILE_EXTENT_SAME: Extents did not match.

I suspected "Extents did not match." is what we actually expected?

Thanks,
Eryu

P.S.
Patch 1-5 look fine to me, but drop this patch for now.

> +Compare sections
> +35ac8d7917305c385c30f3d82c30a8f6  TEST_DIR/test-937/file1
> +39578c21e2cb9f6049b1cf7fc7be12a6  TEST_DIR/test-937/file2
> +Middle sections do not match (intentional)
> diff --git a/tests/generic/group b/tests/generic/group
> index 06b062e1..ef08c0de 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -509,3 +509,7 @@
>  504 auto quick locks
>  505 shutdown auto quick metadata
>  707 auto quick rw collapse zero
> +934 auto quick clone
> +935 auto quick clone
> +936 auto quick clone
> +937 auto quick dedupe clone
> 



[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux