This commit changes the test to calculate quota limits based on the
block size of the underlying filesystem. Also, the sizes of the test
files are now made to be a multiple of the filesystem block size.
Signed-off-by: Chandan Rajendra <chandan@xxxxxxxxxxxxxxxxxx>
---
tests/xfs/299 | 29 +++++++++++++++++----------
tests/xfs/299.out | 60 +++++++++++++++++++++++++++----------------------------
2 files changed, 48 insertions(+), 41 deletions(-)
diff --git a/tests/xfs/299 b/tests/xfs/299
index f0012ff..5a0e693 100755
--- a/tests/xfs/299
+++ b/tests/xfs/299
@@ -41,11 +41,6 @@ _require_xfs_quota
_require_xfs_mkfs_crc
_require_xfs_crc
-bsoft=100
-bhard=500
-isoft=4
-ihard=10
-
_filter_report()
{
tr -s '[:space:]' | \
@@ -58,7 +53,9 @@ _filter_report()
if ($ENV{'LARGE_SCRATCH_DEV'}) {
$val = $ENV{'NUM_SPACE_FILES'};
}
- s/(^\[ROOT\] \S+ \S+ \S+ \S+ \[--------\] )(\S+)/$1@{[$2 - $val]}/g'
+ s/(^\[ROOT\] \S+ \S+ \S+ \S+ \[--------\] )(\S+)/$1@{[$2 - $val]}/g' |
+ perl -npe '
+ s|^(.*?) (\d+) (\d+) (\d+)|$1 @{[$2 * 1024 /'$bsize']} @{[$3 * 1024 /'$bsize']} @{[$4 * 1024 /'$bsize']}|'
}
# The actual point at which limit enforcement takes place for the
@@ -73,9 +70,10 @@ _filter_and_check_blks()
if (/^\#'$id'\s+(\d+)/ && '$enforce') {
$maximum = '$bhard';
$minimum = '$bhard' * 85/100;
- if (($1 < $minimum || $1 > $maximum) && '$noextsz') {
+ $used = $1 * 1024;
+ if (($used < $minimum || $used > $maximum) && '$noextsz') {
printf(" URK %d: %d is out of range! [%d,%d]\n",
- '$id', $1, $minimum, $maximum);
+ '$id', $used, $minimum, $maximum);
}
s/^(\#'$id'\s+)(\d+)/\1 =OK=/g;
}
@@ -128,7 +126,7 @@ _exercise()
echo "ls -l $SCRATCH_MNT" >>$seqres.full
ls -l $SCRATCH_MNT >>$seqres.full
xfs_quota -D $tmp.projects -P $tmp.projid -x \
- -c "limit -$type bsoft=${bsoft}k bhard=${bhard}k $id" \
+ -c "limit -$type bsoft=${bsoft} bhard=${bhard} $id" \
-c "limit -$type isoft=$isoft ihard=$ihard $id" \
$SCRATCH_DEV
xfs_quota -D $tmp.projects -P $tmp.projid -x \
@@ -139,6 +137,8 @@ _exercise()
echo "*** push past the soft inode limit" | tee -a $seqres.full
_file_as_id $SCRATCH_MNT/softie1 $id $type 1024 0
_file_as_id $SCRATCH_MNT/softie2 $id $type 1024 0
+ _file_as_id $SCRATCH_MNT/softie3 $id $type 1024 0
+ _file_as_id $SCRATCH_MNT/softie4 $id $type 1024 0
_qmount
xfs_quota -D $tmp.projects -P $tmp.projid -x \
-c "repquota -birnN -$type" $SCRATCH_DEV |
@@ -146,7 +146,7 @@ _exercise()
echo
echo "*** push past the soft block limit" | tee -a $seqres.full
- _file_as_id $SCRATCH_MNT/softie $id $type 1024 140
+ _file_as_id $SCRATCH_MNT/softie $id $type $bsize 35
_qmount
xfs_quota -D $tmp.projects -P $tmp.projid -x \
-c "repquota -birnN -$type" $SCRATCH_DEV |
@@ -167,7 +167,7 @@ _exercise()
echo
# Note: for quota accounting (not enforcement), EDQUOT is not expected
echo "*** push past the hard block limit (expect EDQUOT)" | tee -a $seqres.full
- _file_as_id $SCRATCH_MNT/softie $id $type 1024 540
+ _file_as_id $SCRATCH_MNT/softie $id $type $bsize 135
echo "ls -l $SCRATCH_MNT" >>$seqres.full
ls -l $SCRATCH_MNT >>$seqres.full
_qmount
@@ -202,6 +202,13 @@ echo "*** user, group, and project"
_qmount_option "uquota,gquota,pquota"
_qmount
+bsize=$(_get_block_size $SCRATCH_MNT)
+
+bsoft=$(( 25 * $bsize ))
+bhard=$(( 125 * $bsize ))
+isoft=4
+ihard=10
+
# non-root users need to be able to write to this filesystem
chmod 777 $SCRATCH_MNT
diff --git a/tests/xfs/299.out b/tests/xfs/299.out
index d13c7da..93e89a9 100644
--- a/tests/xfs/299.out
+++ b/tests/xfs/299.out
@@ -12,23 +12,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 3 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [7 days] 4 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] =OK= 100 500 00 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] =OK= 25 125 0 [7 days] 9 4 10 00 [7 days] 0 0 0 00 [--------]
*** report no quota settings
@@ -36,23 +36,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 3 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [7 days] 4 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] =OK= 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] =OK= 25 125 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** report no quota settings
@@ -60,23 +60,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 3 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 5 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [7 days] 4 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [7 days] 6 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] =OK= 100 500 00 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
+[NAME] =OK= 25 125 0 [7 days] 10 4 10 00 [7 days] 0 0 0 00 [--------]
*** unmount
meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
@@ -92,23 +92,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 3 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [--------] 4 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [--------] 16 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 540 100 500 00 [--none--] 16 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 135 25 125 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** report no quota settings
@@ -116,23 +116,23 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 3 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [--------] 4 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [--------] 16 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 540 100 500 00 [--none--] 16 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 135 25 125 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** report no quota settings
@@ -140,22 +140,22 @@ realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
*** report initial settings
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 1 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft inode limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 0 100 500 00 [--------] 3 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 0 25 125 00 [--------] 5 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the soft block limit
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [--------] 4 4 10 00 [--------] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [--------] 6 4 10 00 [--------] 0 0 0 00 [--------]
*** push past the hard inode limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 140 100 500 00 [--------] 16 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 35 25 125 00 [--------] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** push past the hard block limit (expect EDQUOT)
[ROOT] 0 0 0 00 [--------] 3 0 0 00 [--------] 0 0 0 00 [--------]
-[NAME] 540 100 500 00 [--none--] 16 4 10 00 [--none--] 0 0 0 00 [--------]
+[NAME] 135 25 125 00 [--none--] 18 4 10 00 [--none--] 0 0 0 00 [--------]
*** unmount
--
2.9.5
