Re: [PATCH 6/7] mkfs: consolidate and streamline config opening function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 12, 2018 at 02:31:22PM -0500, Eric Sandeen wrote:
> There was a lot of duplication between open_cli_config and open_config_file
> which was unnecessary.  Collapse all the logic into one function.
> 
> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxxx>
> ---
>  mkfs/config.c   | 148 +++++++++++++++++++++-----------------------------------
>  mkfs/xfs_mkfs.c |   1 -
>  2 files changed, 56 insertions(+), 93 deletions(-)
> 
> diff --git a/mkfs/config.c b/mkfs/config.c
> index 940a055..173ab9a 100644
> --- a/mkfs/config.c
> +++ b/mkfs/config.c
> @@ -523,60 +523,6 @@ config_stat_check(
>  	return 0;
>  }
>  
> -/*
> - * If the file is not found -1 is returned and errno set. Otherwise
> - * the file descriptor is returned.
> - */
> -int
> -open_cli_config(
> -	int		dirfd,
> -	const char	*cli_config_file,
> -	char		**fpath)
> -{
> -	int		fd = -1, len, ret;
> -	struct stat	st;
> -
> -	fd = openat(AT_FDCWD, cli_config_file, O_NOFOLLOW, O_RDONLY);
> -	if (fd < 0) {
> -		len = snprintf(*fpath, PATH_MAX, "%s/%s", MKFS_XFS_CONF_DIR,
> -			       cli_config_file);
> -		/* Indicates truncation */
> -		if (len >= PATH_MAX) {
> -			errno = ENAMETOOLONG;
> -			goto out;
> -		}
> -
> -		fd = openat(dirfd, cli_config_file, O_NOFOLLOW, O_RDONLY);
> -		if (fd < 0)
> -			goto out;
> -
> -		ret = fstat(fd, &st);
> -		if (ret != 0)
> -			goto err_out_close;
> -
> -		ret = config_stat_check(&st);
> -		if (ret != 0)
> -			goto err_out_close;
> -
> -		goto out;
> -	}
> -
> -	memcpy(*fpath, cli_config_file, strlen(cli_config_file));
> -
> -	ret = fstat(fd, &st);
> -	if (ret != 0)
> -		goto err_out_close;
> -
> -	ret = config_stat_check(&st);
> -	if (ret != 0)
> -		goto err_out_close;
> -out:
> -	return fd;
> -err_out_close:
> -	close(fd);
> -	return -1;
> -}
> -
>  #ifndef O_PATH
>  #if defined __alpha__
>  #define O_PATH		040000000
> @@ -589,13 +535,26 @@ err_out_close:
>  #endif
>  #endif /* O_PATH */
>  
> +/*
> + * Try to open a config file, either cli-specified, or default.
> + *
> + * If specified on commandline, search relative to pwd or absolute path.
> + * If not specified or if above fails, try either cli-spec'd file or "default"
> + * in MKFS_XFS_CONF_DIR.
> + *
> + * If any config file is successfully opened, dft->type is set to reflect the
> + * source.
> + *
> + * If a cli-specified file is not found -1 is returned and errno set. Otherwise
> + * the file descriptor is returned.
> + */
>  int
>  open_config_file(
> -	const char			*cli_config_file,
> +	const char			*config_file,
>  	struct mkfs_default_params	*dft,
> -	char				**fpath)	/* path where config is found */
> +	char				**fpath)	/* path where we found config */

Move the comment to the pre-function comment and who is expected to get
rid of it?

"If a config file is found, its path is returned in **fpath.  This
memory must be free()'d by the caller."

Otherwise seems fine so far...

--D

>  {
> -	int				dirfd, fd = -1, len, ret;
> +	int				dirfd = -1, fd = -1, len, ret = 0;
>  	struct stat			st;
>  
>  	*fpath = malloc(PATH_MAX);
> @@ -604,57 +563,62 @@ open_config_file(
>  
>  	memset(*fpath, 0, PATH_MAX);
>  
> -	dirfd = open(MKFS_XFS_CONF_DIR, O_PATH|O_NOFOLLOW|O_DIRECTORY);
> -
> -	if (cli_config_file) {
> -		if (strlen(cli_config_file) > PATH_MAX) {
> +	/* first try relative to pwd or absolute path to cli configfile */
> +	if (config_file) {
> +		dft->type = DEFAULTS_CLI_CONFIG;
> +		if (strlen(config_file) > PATH_MAX) {
>  			errno = ENAMETOOLONG;
>  			goto out;
>  		}
> -		fd = open_cli_config(dirfd, cli_config_file, fpath);
> -		goto out;
> +		memcpy(*fpath, config_file, strlen(config_file));
> +		fd = openat(AT_FDCWD, config_file, O_NOFOLLOW, O_RDONLY);
>  	}
>  
> -	fd = openat(dirfd, "default", O_NOFOLLOW, O_RDONLY);
> -	if (fd < 0)
> -		goto out;
> -
> -	dft->type = DEFAULTS_CONFIG;
> -
> -	len = snprintf(*fpath, PATH_MAX, "%s/%s", MKFS_XFS_CONF_DIR, "default");
> -	/* Indicates truncation */
> -	if (len >= PATH_MAX) {
> -		errno = ENAMETOOLONG;
> -		goto err_out_close;
> +	/* on failure search for cli config or default file in sysconfdir */
> +	if (fd < 0) {
> +		if (!config_file)
> +			config_file = "default";

Use a symbolic constant instead of "default" here (and elsewhere)?

> +		len = snprintf(*fpath, PATH_MAX, "%s/%s", MKFS_XFS_CONF_DIR,
> +				config_file);
> +		/* Indicates truncation */
> +		if (len >= PATH_MAX) {
> +			errno = ENAMETOOLONG;
> +			goto out;
> +		}
> +		dirfd = open(MKFS_XFS_CONF_DIR, O_PATH|O_NOFOLLOW|O_DIRECTORY);
> +		if (dirfd < 0)
> +			goto out;
> +		fd = openat(dirfd, config_file, O_NOFOLLOW, O_RDONLY);
> +		if (fd < 0)
> +			goto out;
> +		if (!strcmp(config_file, "default"))
> +			dft->type = DEFAULTS_CONFIG;
>  	}
>  
>  	ret = fstat(fd, &st);
>  	if (ret != 0)
> -		goto err_out_close;
> -
> +		goto out;
>  	ret = config_stat_check(&st);
>  	if (ret != 0)
> -		goto err_out_close;
> -
> +		goto out;
> +	
>  out:
> -	if (fd < 0) {
> -		if (dft->type != DEFAULTS_BUILTIN) {
> -			fprintf(stderr,
> +	/* stat check is always fatal; missing is fatal only if cli-specified */
> +	if (ret ||
> +	    (fd < 0 && dft->type == DEFAULTS_CLI_CONFIG)) {
> +		fprintf(stderr,
>  _("Unable to open %s config file: %s : %s\n"),
> -				default_type_str(dft->type), *fpath,
> -				strerror(errno));
> -			free(*fpath);
> -			exit(1);
> -		}
> +			default_type_str(dft->type), *fpath,
> +			strerror(errno));
> +		free(*fpath);
> +		exit(1);
>  	}
> +
> +	if (ret && fd >= 0)
> +		close(fd);
>  	if (dirfd >= 0)
>  		close(dirfd);
> -	return fd;
> -
> -err_out_close:
> -	close(fd);
> -	fd = -1;
> -	goto out;
> +	return ret ? ret : fd;
>  }
>  
>  /*
> diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
> index be3094b..acd98f6 100644
> --- a/mkfs/xfs_mkfs.c
> +++ b/mkfs/xfs_mkfs.c
> @@ -3785,7 +3785,6 @@ _("respecification of configuration not allowed\n"));
>  				exit(1);
>  			}
>  			cli_config_file = optarg;
> -			dft.type = DEFAULTS_CLI_CONFIG;
>  			break;
>  		default:
>  			continue;
> -- 
> 1.8.3.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux