On Thu, Mar 15, 2018 at 06:45:20PM +0100, Jan Tulak wrote:
> xfs_repair ends with a return code 0 if it finished ok, no matter if
> there were some errors in the fs, or not. The new flag -e means that we
> can avoid screenscraping and parsing text output to detect if an error
> was found (and corrected).
>
> If something could not be corrected or in any other case than the "found
> something but fixed it all," the behaviour with this flag is unchanged.
>
> Signed-off-by: Jan Tulak <jtulak@xxxxxxxxxx>
> ---
> man/man8/xfs_repair.8 | 14 ++++++++++----
> repair/xfs_repair.c | 17 +++++++++++++++--
> 2 files changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/man/man8/xfs_repair.8 b/man/man8/xfs_repair.8
> index 85e4dc97..1b197571 100644
> --- a/man/man8/xfs_repair.8
> +++ b/man/man8/xfs_repair.8
> @@ -4,7 +4,7 @@ xfs_repair \- repair an XFS filesystem
> .SH SYNOPSIS
> .B xfs_repair
> [
> -.B \-dfLnPv
> +.B \-defLnPv
> ] [
> .B \-m
> .I maxmem
> @@ -168,6 +168,9 @@ Repair dangerously. Allow
> to repair an XFS filesystem mounted read only. This is typically done
> on a root filesystem from single user mode, immediately followed by a reboot.
> .TP
> +.B \-e
> +If any error was found and repaired, the exit code is 3 instead of the usual 0.
"If any metadata corruption was found, the status returned is 3..."
Clarifying exactly what kinds of errors generate status 3, and making
the language more consistent with the EXIT STATUS section.
> +.TP
> .B \-V
> Prints the version number and exits.
> .SS Checks Performed
> @@ -512,14 +515,17 @@ will return a status of 1 if filesystem corruption was detected and
> 0 if no filesystem corruption was detected.
> .B xfs_repair
> run without the \-n option will always return a status code of 0 if
> -it completes without problems. If a runtime error is encountered
> -during operation, it will return a status of 1. In this case,
> +it completes without problems, unless the flag
> +.B -e
> +is used. If it is used, then status code 3 is reported when any issue with the
"...status 3 is returned..."
> +filesystem was found, but could be fixed. If a runtime error is encountered during
> +operation, it will return a status of 1. In this case,
> .B xfs_repair
> should be restarted. If
> .B xfs_repair is unable
> to proceed due to a dirty log, it will return a status of 2. See below.
> .SH DIRTY LOGS
> -Due to the design of the XFS log, a dirty log can only be replayed
> +Due to the design of the XFS log, a dirty log can only be replayed
> by the kernel, on a machine having the same CPU architecture as the
> machine which was writing to the log.
> .B xfs_repair
> diff --git a/repair/xfs_repair.c b/repair/xfs_repair.c
> index 312a0d08..94015da6 100644
> --- a/repair/xfs_repair.c
> +++ b/repair/xfs_repair.c
> @@ -77,6 +77,7 @@ static char *c_opts[] = {
> static int bhash_option_used;
> static long max_mem_specified; /* in megabytes */
> static int phase2_threads = 32;
> +static int report_corrected = 0;
It is not necessary to initialize static global variables to zero.
Also, bool not int because the value is boolean.
> static void
> usage(void)
> @@ -97,6 +98,7 @@ usage(void)
> " -o subopts Override default behaviour, refer to man page.\n"
> " -t interval Reporting interval in seconds.\n"
> " -d Repair dangerously.\n"
> +" -e Exit with a non-zero code even when all errors were repaired.\n"
> " -V Reports version and exits.\n"), progname);
> exit(1);
> }
> @@ -214,12 +216,13 @@ process_args(int argc, char **argv)
> ag_stride = 0;
> thread_count = 1;
> report_interval = PROG_RPT_DEFAULT;
> + report_corrected = 0;
(or here)
>
> /*
> * XXX have to add suboption processing here
> * attributes, quotas, nlinks, aligned_inos, sb_fbits
> */
> - while ((c = getopt(argc, argv, "c:o:fl:m:r:LnDvVdPt:")) != EOF) {
> + while ((c = getopt(argc, argv, "c:o:fl:m:r:LnDvVdPet:")) != EOF) {
> switch (c) {
> case 'D':
> dumpcore = 1;
> @@ -329,6 +332,9 @@ process_args(int argc, char **argv)
> case 't':
> report_interval = (int)strtol(optarg, NULL, 0);
> break;
> + case 'e':
> + report_corrected = 1;
> + break;
> case '?':
> usage();
> }
> @@ -1096,5 +1102,12 @@ _("Repair of readonly mount complete. Immediate reboot encouraged.\n"));
>
> free(msgbuf);
>
> - return (0);
> + if (report_corrected) {
> + if (fs_is_dirty)
> + return (3);
> + else
> + return (0);
> + } else {
> + return (0);
> + }
if (fs_is_dirty && report_corrected)
return (3);
return (0);
?
--D
> }
> --
> 2.15.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
