From: Dave Chinner <dchinner@xxxxxxxxxx>
One of the biggest performance problems with large directory block
sizes is the CPU overhead in maintaining the buffer log item direty
region bitmap. The bit manipulations and buffer region mapping
calls are right at the top of the profiles when running tests on 64k
directory buffers:
14.65% [kernel] [k] memcpy
8.57% [kernel] [k] xfs_next_bit
4.96% [kernel] [k] xfs_buf_item_format
4.83% [kernel] [k] xfs_buf_item_size_segment.isra.4
4.44% [kernel] [k] xfs_buf_offset
The memcpy is the copying of the dirty regions into the log vec
array, but almost twice as much CPU time is spent working out what
needs to be copied and where it needs to be copied from. As a
result, a debug kernel running a parallel fsmark file create
workload we see performance like this on a 64k block size directory:
FSUse% Count Size Files/sec App Overhead
0 1600000 0 175994.3 13120040
0 3200000 0 167829.7 14089107
0 4800000 0 159274.7 15217029
0 6400000 0 150097.3 16543647
....
In contrast, a 4k directory block size returns create rates around
310,000 files/s - almost 3x faster for the same CPU burn.
This patch switching the dirty range tracking to just the first and
last modified bytes in 4 separate regions on the buffer. This only
gets converted to a bitmap when the item is formatted into the CIL
log vector array. Hence the profile of the relevant formatting
functions now looks like:
22.21% [kernel] [k] memcpy
0.51% [kernel] [k] xfs_buf_item_init
0.49% [kernel] [k] xfs_buf_item_unlock
0.39% [kernel] [k] xfs_buf_item_size
0.29% [kernel] [k] xfs_buf_item_format
0.20% [kernel] [k] xfs_buf_item_log
0.14% [kernel] [k] xfs_buf_item_committing
And the performance is:
FSUse% Count Size Files/sec App Overhead
0 1600000 0 224963.5 12631894
0 3200000 0 226142.4 12608851
0 4800000 0 237453.1 12509915
0 6400000 0 233356.8 12939907
Substantially higher.
`
The memcpy time is higher because that's where we spend most of
the CPU we saved - in the buffer formatting routine:
....
__xfs_trans_commit
xfs_log_commit_cil
xfs_buf_item_format
xfs_buf_item_format_segment
xfs_buf_iomove
memcpy
Hence we can see that there is major reduction in buffer formatting
overhead that translates to improved performance.
The current implementation tracks, at most, four dirty regions per
buffer. The nature of directory operations result in almost
operation modifying a header in the buffer, a tail section in the
buffer and then some number of bytes/regions in the middle of the
buffer.
If we just track a single region, it will almost always cover the
entire directory buffer as we do updates to both the head and tail
of most directory buffers. That's a fairly large cost in terms of
log space and CPU overhead for random individual operations.
Similarly, increasing the number of regions to 8 (from 4) reduces
performance by 5-10%, so the gains from tracking multiple regions
tail off very quickly.
We also have to consider non-directory buffer modification patterns.
freespace, inode and extent btrees are the other major types of
buffers that get logged, but they also have modification patterns
that lend themselves well to a small number of ranges for dirty
tracking. That is, each btree block is kept compact, so when we
insert or remove a record or pointer we shift then higher
records/ptrs up or down as a block, and then log the lot of them.
And they also often have a header that is dirtied with each
insert/delete, so typically there are usually only one or two dirty
ranges in a btree block.
The only metadata type that really seems to benefit from fine
grained dirty range logging is the inode buffers. Specifically, for
v4 superblocks the create transaction only dirties the regions of
the inode core, so for 256 byte inodes only dirties every alternate
bitmap segment. Dirty range tracking will double the required log
bandwidth of inode buffers during create (roughly 25% increase on a
4k directory block size filesystem). Typically this won't result in
a noticable performance differential (except in inode creation
benchmarks) on typical systems because the log is generally far from
being bandwidth bound.
For v5 filesystems, even this isn't an issue because the initialised
inode buffers are XFS_BLI_ORDERED buffers and so their contents
aren't logged.
The same problem happens with unlinks due to the unlinked list being
logged via the inode buffer. Again this results in an increase
in log bandwidth on both v4 and v5 filesystems, but there isn't any
performance differential that occurs because, again, the log isn't
bandwidth bound. As it is, there is an existing plan of improvement
to the unlinked list logging (moving the unlinked list logging into
the inode core transaction) and hence that will avoid any extra
overhead here as well.
Hence the overall CPU reduction benefits of minimal dirty range
tracking versus fine grained dirty bit tracking are overall going to
be beneficial to performance and throughput on current (v5) format
filesystems.
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
fs/xfs/xfs_buf.c | 2 +
fs/xfs/xfs_buf_item.c | 431 +++++++++++++++++++++++++-------------------------
fs/xfs/xfs_buf_item.h | 19 +++
3 files changed, 238 insertions(+), 214 deletions(-)
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index d1da2ee9e6db..7621fabeb505 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1583,6 +1583,8 @@ xfs_buf_iomove(
page = bp->b_pages[page_index];
csize = min_t(size_t, PAGE_SIZE - page_offset,
BBTOB(bp->b_io_length) - boff);
+ if (boff + csize > bend)
+ csize = bend - boff;
ASSERT((csize + page_offset) <= PAGE_SIZE);
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 270ddb4d2313..0629d09406a4 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -66,50 +66,12 @@ xfs_buf_item_size_segment(
int *nvecs,
int *nbytes)
{
- struct xfs_buf *bp = bip->bli_buf;
- int next_bit;
- int last_bit;
-
- last_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size, 0);
- if (last_bit == -1)
- return;
-
/*
* initial count for a dirty buffer is 2 vectors - the format structure
- * and the first dirty region.
+ * and the dirty region. Dirty region is accounted for separately.
*/
*nvecs += 2;
- *nbytes += xfs_buf_log_format_size(blfp) + XFS_BLF_CHUNK;
-
- while (last_bit != -1) {
- /*
- * This takes the bit number to start looking from and
- * returns the next set bit from there. It returns -1
- * if there are no more bits set or the start bit is
- * beyond the end of the bitmap.
- */
- next_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size,
- last_bit + 1);
- /*
- * If we run out of bits, leave the loop,
- * else if we find a new set of bits bump the number of vecs,
- * else keep scanning the current set of bits.
- */
- if (next_bit == -1) {
- break;
- } else if (next_bit != last_bit + 1) {
- last_bit = next_bit;
- (*nvecs)++;
- } else if (xfs_buf_offset(bp, next_bit * XFS_BLF_CHUNK) !=
- (xfs_buf_offset(bp, last_bit * XFS_BLF_CHUNK) +
- XFS_BLF_CHUNK)) {
- last_bit = next_bit;
- (*nvecs)++;
- } else {
- last_bit++;
- }
- *nbytes += XFS_BLF_CHUNK;
- }
+ *nbytes += xfs_buf_log_format_size(blfp);
}
/*
@@ -136,7 +98,9 @@ xfs_buf_item_size(
int *nbytes)
{
struct xfs_buf_log_item *bip = BUF_ITEM(lip);
- int i;
+ struct xfs_buf *bp = bip->bli_buf;
+ uint offset;
+ int i, j;
ASSERT(atomic_read(&bip->bli_refcount) > 0);
if (bip->bli_flags & XFS_BLI_STALE) {
@@ -155,6 +119,7 @@ xfs_buf_item_size(
}
ASSERT(bip->bli_flags & XFS_BLI_LOGGED);
+ ASSERT(bip->bli_flags & XFS_BLI_DIRTY);
if (bip->bli_flags & XFS_BLI_ORDERED) {
/*
@@ -169,17 +134,45 @@ xfs_buf_item_size(
/*
* the vector count is based on the number of buffer vectors we have
- * dirty bits in. This will only be greater than one when we have a
+ * dirty ranges in. This will only be greater than one when we have a
* compound buffer with more than one segment dirty. Hence for compound
- * buffers we need to track which segment the dirty bits correspond to,
- * and when we move from one segment to the next increment the vector
- * count for the extra buf log format structure that will need to be
- * written.
+ * buffers we need to track which segment the dirty ranges correspond
+ * to, and when we move from one segment to the next increment the
+ * vector count for the extra buf log format structure that will need to
+ * be written.
*/
- for (i = 0; i < bip->bli_format_count; i++) {
- xfs_buf_item_size_segment(bip, &bip->bli_formats[i],
- nvecs, nbytes);
+ ASSERT(bip->bli_range[0].last != 0);
+ if (bip->bli_range[0].last == 0) {
+ /* clean! */
+ ASSERT(bip->bli_range[0].first == 0);
+ return;
}
+
+ for (i = 0, offset = 0;
+ i < bip->bli_format_count;
+ i++, offset += BBTOB(bp->b_maps[i].bm_len)) {
+ /* Only format dirty regions */
+ for (j = 0; j < bip->bli_ranges; j++) {
+ struct xfs_bli_range *rp = &bip->bli_range[j];
+
+ /* range ends before segment start, check next range */
+ if (rp->last < offset)
+ continue;
+
+ /* range beyond segment end, check next segment */
+ if (rp->first > offset + BBTOB(bp->b_maps[i].bm_len))
+ break;
+
+ /* dirty range overlaps segment, need headers */
+ xfs_buf_item_size_segment(bip, &bip->bli_formats[i],
+ nvecs, nbytes);
+ }
+ }
+
+ for (j = 0; j < bip->bli_ranges; j++)
+ *nbytes += bip->bli_range[j].last - bip->bli_range[j].first;
+
+
trace_xfs_buf_item_size(bip);
}
@@ -192,7 +185,6 @@ xfs_buf_item_copy_iovec(
int first_bit,
uint nbits)
{
- offset += first_bit * XFS_BLF_CHUNK;
xlog_copy_iovec(lv, vecp, XLOG_REG_TYPE_BCHUNK,
xfs_buf_offset(bp, offset),
nbits * XFS_BLF_CHUNK);
@@ -215,14 +207,18 @@ xfs_buf_item_format_segment(
struct xfs_buf_log_item *bip,
struct xfs_log_vec *lv,
struct xfs_log_iovec **vecp,
+ struct xfs_bli_range *rp,
uint offset,
+ uint length,
struct xfs_buf_log_format *blfp)
{
struct xfs_buf *bp = bip->bli_buf;
+ char *buf;
uint base_size;
+ uint start;
+ uint end;
int first_bit;
int last_bit;
- int next_bit;
uint nbits;
/* copy the flags across from the base format item */
@@ -234,16 +230,6 @@ xfs_buf_item_format_segment(
* memory structure.
*/
base_size = xfs_buf_log_format_size(blfp);
-
- first_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size, 0);
- if (!(bip->bli_flags & XFS_BLI_STALE) && first_bit == -1) {
- /*
- * If the map is not be dirty in the transaction, mark
- * the size as zero and do not advance the vector pointer.
- */
- return;
- }
-
blfp = xlog_copy_iovec(lv, vecp, XLOG_REG_TYPE_BFORMAT, blfp, base_size);
blfp->blf_size = 1;
@@ -258,46 +244,40 @@ xfs_buf_item_format_segment(
return;
}
+ blfp->blf_size++;
/*
- * Fill in an iovec for each set of contiguous chunks.
+ * Now we need to set the bits in the bitmap and set up the iovecs
+ * appropriately. We know there is a contiguous range in this buffer
+ * than needs to be set, so find the first bit, the last bit, and
+ * go from there.
*/
- last_bit = first_bit;
- nbits = 1;
- for (;;) {
- /*
- * This takes the bit number to start looking from and
- * returns the next set bit from there. It returns -1
- * if there are no more bits set or the start bit is
- * beyond the end of the bitmap.
- */
- next_bit = xfs_next_bit(blfp->blf_data_map, blfp->blf_map_size,
- (uint)last_bit + 1);
- /*
- * If we run out of bits fill in the last iovec and get out of
- * the loop. Else if we start a new set of bits then fill in
- * the iovec for the series we were looking at and start
- * counting the bits in the new one. Else we're still in the
- * same set of bits so just keep counting and scanning.
- */
- if (next_bit == -1) {
- xfs_buf_item_copy_iovec(lv, vecp, bp, offset,
- first_bit, nbits);
- blfp->blf_size++;
- break;
- } else if (next_bit != last_bit + 1 ||
- xfs_buf_item_straddle(bp, offset, next_bit, last_bit)) {
- xfs_buf_item_copy_iovec(lv, vecp, bp, offset,
- first_bit, nbits);
- blfp->blf_size++;
- first_bit = next_bit;
- last_bit = next_bit;
- nbits = 1;
- } else {
- last_bit++;
- nbits++;
- }
- }
+ start = 0;
+ if (offset < rp->first)
+ start = rp->first - offset;
+ end = length - 1;
+ if (offset + length > rp->last)
+ end = rp->last - offset - 1;
+
+ start &= ~((1 << XFS_BLF_SHIFT) - 1);
+ first_bit = start >> XFS_BLF_SHIFT;
+ last_bit = end >> XFS_BLF_SHIFT;
+ nbits = last_bit - first_bit + 1;
+ bitmap_set((unsigned long *)blfp->blf_data_map, first_bit, nbits);
+
+ ASSERT(end <= length);
+ ASSERT(start <= length);
+ ASSERT(length >= nbits * XFS_BLF_CHUNK);
+ /*
+ * Copy needs to be done a buffer page at a time as we can be logging
+ * unmapped buffers. hence we have to use xfs_buf_iomove() rather than a
+ * straight memcpy here.
+ */
+ offset += first_bit * XFS_BLF_CHUNK;
+ length = nbits * XFS_BLF_CHUNK;
+ buf = xlog_prepare_iovec(lv, vecp, XLOG_REG_TYPE_BCHUNK);
+ xfs_buf_iomove(bp, offset, length, buf, XBRW_READ);
+ xlog_finish_iovec(lv, *vecp, length);
}
/*
@@ -314,8 +294,8 @@ xfs_buf_item_format(
struct xfs_buf_log_item *bip = BUF_ITEM(lip);
struct xfs_buf *bp = bip->bli_buf;
struct xfs_log_iovec *vecp = NULL;
- uint offset = 0;
- int i;
+ uint offset;
+ int i, j;
ASSERT(atomic_read(&bip->bli_refcount) > 0);
ASSERT((bip->bli_flags & XFS_BLI_LOGGED) ||
@@ -326,7 +306,6 @@ xfs_buf_item_format(
ASSERT(!(bip->bli_flags & XFS_BLI_ORDERED) ||
(bip->bli_flags & XFS_BLI_STALE));
-
/*
* If it is an inode buffer, transfer the in-memory state to the
* format flags and clear the in-memory state.
@@ -349,10 +328,36 @@ xfs_buf_item_format(
bip->bli_flags &= ~XFS_BLI_INODE_BUF;
}
- for (i = 0; i < bip->bli_format_count; i++) {
- xfs_buf_item_format_segment(bip, lv, &vecp, offset,
- &bip->bli_formats[i]);
- offset += BBTOB(bp->b_maps[i].bm_len);
+ for (i = 0, offset = 0;
+ i < bip->bli_format_count;
+ i++, offset += BBTOB(bp->b_maps[i].bm_len)) {
+
+ /* stale regions cover the entire segment */
+ if (bip->bli_flags & XFS_BLI_STALE) {
+ xfs_buf_item_format_segment(bip, lv, &vecp, NULL, offset,
+ BBTOB(bp->b_maps[i].bm_len),
+ &bip->bli_formats[i]);
+ continue;
+ }
+
+ /* only format dirty ranges over the current segment */
+ for (j = 0; j < bip->bli_ranges; j++) {
+ struct xfs_bli_range *rp = &bip->bli_range[j];
+
+ /* range ends before segment start, check next range */
+ if (rp->last < offset)
+ continue;
+
+ /* range beyond segment end, check next segment */
+ if (rp->first > offset + BBTOB(bp->b_maps[i].bm_len))
+ break;
+
+ /* dirty range overlaps segment, need headers */
+ xfs_buf_item_format_segment(bip, lv, &vecp, rp, offset,
+ BBTOB(bp->b_maps[i].bm_len),
+ &bip->bli_formats[i]);
+
+ }
}
/*
@@ -737,6 +742,9 @@ xfs_buf_item_init(
int error;
int i;
+ for (i = 0; i < XFS_BLI_RANGES; i++)
+ bip->bli_range[i].first = UINT_MAX;
+
/*
* Check to see if there is already a buf log item for
* this buffer. If we do already have one, there is
@@ -788,133 +796,136 @@ xfs_buf_item_init(
/*
* Mark bytes first through last inclusive as dirty in the buf
- * item's bitmap.
+ * record dirty regions on the buffer.
*/
-static void
-xfs_buf_item_log_segment(
+void
+xfs_buf_item_log(
+ struct xfs_buf_log_item *bip,
uint first,
- uint last,
- uint *map)
+ uint last)
{
- uint first_bit;
- uint last_bit;
- uint bits_to_set;
- uint bits_set;
- uint word_num;
- uint *wordp;
- uint bit;
- uint end_bit;
- uint mask;
+ struct xfs_bli_range *rp = NULL;
+ int i;
+ ASSERT(last != 0);
+ ASSERT(first <= last);
+ ASSERT(last < BBTOB(bip->bli_buf->b_length));
+
+ /* simple case - first range being stored */
+ if (!bip->bli_ranges) {
+ bip->bli_ranges = 1;
+ bip->bli_range[0].first = rounddown(first, XFS_BLF_CHUNK);
+ bip->bli_range[0].last = roundup(last, XFS_BLF_CHUNK);
+ ASSERT(bip->bli_range[0].last != 0);
+ ASSERT(bip->bli_range[0].first <= bip->bli_range[0].last);
+ return;
+ }
- /*
- * Convert byte offsets to bit numbers.
- */
- first_bit = first >> XFS_BLF_SHIFT;
- last_bit = last >> XFS_BLF_SHIFT;
+ /* 2nd case: search for overlaps and extend */
+ for (i = 0; i < bip->bli_ranges; i++) {
+ rp = &bip->bli_range[i];
- /*
- * Calculate the total number of bits to be set.
- */
- bits_to_set = last_bit - first_bit + 1;
+ /* wholly within an existing dirty range, we're done */
+ if (first >= rp->first && last <= rp->last)
+ return;
+ /* no overlap, continue */
+ if (first > rp->last || last < rp->first)
+ continue;
- /*
- * Get a pointer to the first word in the bitmap
- * to set a bit in.
- */
- word_num = first_bit >> BIT_TO_WORD_SHIFT;
- wordp = &map[word_num];
+ /* left edge overlap, extend */
+ if (first < rp->first)
+ rp->first = rounddown(first, XFS_BLF_CHUNK);
- /*
- * Calculate the starting bit in the first word.
- */
- bit = first_bit & (uint)(NBWORD - 1);
+ /* right edge overlap, extend */
+ if (last > rp->last)
+ rp->last = roundup(last, XFS_BLF_CHUNK) - 1;
- /*
- * First set any bits in the first word of our range.
- * If it starts at bit 0 of the word, it will be
- * set below rather than here. That is what the variable
- * bit tells us. The variable bits_set tracks the number
- * of bits that have been set so far. End_bit is the number
- * of the last bit to be set in this word plus one.
- */
- if (bit) {
- end_bit = MIN(bit + bits_to_set, (uint)NBWORD);
- mask = ((1U << (end_bit - bit)) - 1) << bit;
- *wordp |= mask;
- wordp++;
- bits_set = end_bit - bit;
- } else {
- bits_set = 0;
+ goto merge;
}
- /*
- * Now set bits a whole word at a time that are between
- * first_bit and last_bit.
- */
- while ((bits_to_set - bits_set) >= NBWORD) {
- *wordp |= 0xffffffff;
- bits_set += NBWORD;
- wordp++;
- }
+ /* 3rd case: not found, insert or extend */
+ ASSERT(i == bip->bli_ranges);
/*
* Finally, set any bits left to be set in one last partial word.
+ * Case 3a: Extend last slot.
+ *
+ * If the range is beyond the last slot, extend the last slot to
+ * cover it. This treated the same as if an overlap existed with
+ * the last range.
*/
- end_bit = bits_to_set - bits_set;
- if (end_bit) {
- mask = (1U << end_bit) - 1;
- *wordp |= mask;
+ if (i == XFS_BLI_RANGES) {
+ ASSERT(bip->bli_ranges == XFS_BLI_RANGES);
+ rp = &bip->bli_range[XFS_BLI_RANGES - 1];
+
+ if (first < rp->first)
+ rp->first = rounddown(first, XFS_BLF_CHUNK);
+ if (last > rp->last)
+ rp->last = roundup(last, XFS_BLF_CHUNK) - 1;
+ goto merge;
}
-}
-/*
- * Mark bytes first through last inclusive as dirty in the buf
- * item's bitmap.
- */
-void
-xfs_buf_item_log(
- struct xfs_buf_log_item *bip,
- uint first,
- uint last)
-{
- int i;
- uint start;
- uint end;
- struct xfs_buf *bp = bip->bli_buf;
+ /* Case 3b: insert new range.
+ *
+ * Find the insertion point for the new range, then make a hole
+ * and insert the new range.
+ */
+ for (i = 0; i < bip->bli_ranges; i++) {
+ rp = &bip->bli_range[i];
+ /* order ranges by ascending offset */
+ if (last < rp->first)
+ break;
+ }
+ /* shift down and insert */
+ ASSERT(i < XFS_BLI_RANGES);
+ rp = &bip->bli_range[i];
+ if (i < XFS_BLI_RANGES - 1)
+ memmove(rp + 1, rp, sizeof(*rp) * (bip->bli_ranges - i));
+ bip->bli_ranges++;
+ rp->first = rounddown(first, XFS_BLF_CHUNK);
+ rp->last = roundup(last, XFS_BLF_CHUNK) - 1;
+
+merge:
/*
- * walk each buffer segment and mark them dirty appropriately.
+ * Check for overlaping ranges and merge them. If there is only one
+ * range, there is nothing to merge so bail early.
*/
- start = 0;
- for (i = 0; i < bip->bli_format_count; i++) {
- if (start > last)
- break;
- end = start + BBTOB(bp->b_maps[i].bm_len) - 1;
+ if (bip->bli_ranges == 1)
+ return;
+
+ for (i = 0; i < bip->bli_ranges - 1; i++) {
+ struct xfs_bli_range *rp_next;
+
+ rp = &bip->bli_range[i];
+ rp_next = &bip->bli_range[i + 1];
- /* skip to the map that includes the first byte to log */
- if (first > end) {
- start += BBTOB(bp->b_maps[i].bm_len);
+
+check_merge:
+ ASSERT(rp->last != 0);
+ ASSERT(rp->first <= rp->last);
+
+ /* no overlap or adjacent, move on */
+ if (rp->last < rp_next->first - 1)
continue;
- }
/*
- * Trim the range to this segment and mark it in the bitmap.
- * Note that we must convert buffer offsets to segment relative
- * offsets (e.g., the first byte of each segment is byte 0 of
- * that segment).
+ * overlap: select lowest first, highest last, remove the merged
+ * range (rp_next) and then go back and check the next range for
+ * whether it can be merged (e.g. we have 4 separate ranges,
+ * then something logs the buffer entirely. This merges all
+ * ranges into one).
*/
- if (first < start)
- first = start;
- if (end > last)
- end = last;
- xfs_buf_item_log_segment(first - start, end - start,
- &bip->bli_formats[i].blf_data_map[0]);
-
- start += BBTOB(bp->b_maps[i].bm_len);
+ rp->first = min(rp->first, rp_next->first);
+ rp->last = max(rp->last, rp_next->last);
+ if (i + 2 < bip->bli_ranges)
+ memmove(rp_next, rp_next + 1, sizeof(*rp) *
+ (bip->bli_ranges - i - 2));
+ bip->bli_ranges--;
+ if (i < bip->bli_ranges - 1)
+ goto check_merge;
}
}
-
/*
* Return true if the buffer has any ranges logged/dirtied by a transaction,
* false otherwise.
@@ -923,15 +934,7 @@ bool
xfs_buf_item_dirty_format(
struct xfs_buf_log_item *bip)
{
- int i;
-
- for (i = 0; i < bip->bli_format_count; i++) {
- if (!xfs_bitmap_empty(bip->bli_formats[i].blf_data_map,
- bip->bli_formats[i].blf_map_size))
- return true;
- }
-
- return false;
+ return bip->bli_ranges > 0;
}
STATIC void
diff --git a/fs/xfs/xfs_buf_item.h b/fs/xfs/xfs_buf_item.h
index 643f53dcfe51..9b278c3a2db9 100644
--- a/fs/xfs/xfs_buf_item.h
+++ b/fs/xfs/xfs_buf_item.h
@@ -57,6 +57,25 @@ struct xfs_buf_log_item {
unsigned int bli_recur; /* lock recursion count */
atomic_t bli_refcount; /* cnt of tp refs */
int bli_format_count; /* count of headers */
+
+ /*
+ * logging ranges. Keep a small number of distinct ranges rather than a
+ * bitmap which is expensive to maintain.
+ * 4 separate ranges s probably optimal so that we
+ * can log separate header, tail and content changes (e.g. for dir
+ * structures) without capturing the entire buffer unnecessarily for
+ * isolated changes.
+ *
+ * Note: ranges are 32 bit values because we have to support an end
+ * range value of 0x10000....
+ */
+#define XFS_BLI_RANGES 4
+ struct xfs_bli_range {
+ uint32_t first;
+ uint32_t last;
+ } bli_range[XFS_BLI_RANGES];
+ int bli_ranges;
+
struct xfs_buf_log_format *bli_formats; /* array of in-log header ptrs */
struct xfs_buf_log_format __bli_format; /* embedded in-log header */
};
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
