util-linux commit 6dede2f2f7c5 ("libmount: support MS_RDONLY on
write-protected devices") changed the error message on read-only
block device, and in the failure case printed one line message
instead of two (for details please see comments in common/filter),
and this change broke generic/050 and overlay/035.
Fix it by adding more filter rules to _filter_ro_mount and updating
associated .out files to unify the output from both old and new
util-linux versions.
Signed-off-by: Eryu Guan <eguan@xxxxxxxxxx>
---
v4 (also passed with both old & new util-linux):
- add more comments to explain the output differences between util-linux
versions
- print out message directly instead of using perl variables
- add word "device" to failed ro mount message
v3:
- document the filtered format in comments
- remove legacy sed filter, the perl filter covers the legacy case well
- filter out $SCRATCH_DEV/MNT too and use a consistent output
- remove the new filter_mount helper in overlay/035
common/filter | 59 +++++++++++++++++++++++++++++++++++++++++++++++----
tests/generic/050 | 8 +++----
tests/generic/050.out | 8 +++----
tests/overlay/035 | 4 ++--
tests/overlay/035.out | 4 ++--
5 files changed, 67 insertions(+), 16 deletions(-)
diff --git a/common/filter b/common/filter
index a212c09aa138..9c33efacea6c 100644
--- a/common/filter
+++ b/common/filter
@@ -397,11 +397,62 @@ _filter_ending_dot()
sed -e "s/\.$//"
}
-# Older mount output referred to "block device" when mounting RO devices
-# It's gone in newer versions
+# Older mount output referred to "block device" when mounting RO devices. It's
+# gone in newer versions. v2.30 changed the output again. This filter is to
+# unify all read-only mount messages across all util-linux versions.
+#
+# for a successful ro mount:
+# ancient: mount: block device <device> is write-protected, mounting read-only
+# prior to v2.30: mount: <device> is write-protected, mounting read-only
+# v2.30 and later: mount: <mountpoint>: WARNING: device write-protected, mounted read-only.
+#
+# a failed ro mount:
+# ancient (two-line message):
+# mount: block device <device> is write-protected, mounting read-only
+# mount: cannot mount block device <device> read-only
+# prior to v2.30 (two-line message):
+# mount: <device> is write-protected, mounting read-only
+# mount: cannot mount <device> read-only
+# v2.30 and later (single-line message):
+# mount: <mountpoint>: cannot mount <device> read-only.
+#
+# a failed rw remount:
+# ancient: mount: cannot remount block device <device> read-write, is write-protected
+# prior to v2.30: mount: cannot remount <device> read-write, is write-protected
+# v2.30 and later: mount: <mountpoint>: cannot remount <device> read-write, is write-protected.
+#
+# Now use _filter_ro_mount to unify all these differences across old & new
+# util-linux versions. So the filtered format would be:
+#
+# successful ro mount:
+# mount: device write-protected, mounting read-only
+#
+# failed ro mount:
+# mount: device write-protected, mounting read-only
+# mount: cannot mount device read-only
+#
+# failed rw remount:
+# mount: cannot remount device read-write, is write-protected
_filter_ro_mount() {
- sed -e "s/mount: block device/mount:/g" \
- -e "s/mount: cannot mount block device/mount: cannot mount/g"
+ perl -ne '
+ if (/write-protected, mount.*read-only/) {
+ # filter successful ro mount, and first line of prior to v2.30
+ # format failed ro mount
+ print "mount: device write-protected, mounting read-only\n";
+ } elsif (/mount: .*: cannot mount.*read-only/) {
+ # filter v2.30 format failed ro mount, convert single-line
+ # message to two-line message
+ print "mount: device write-protected, mounting read-only\n";
+ print "mount: cannot mount device read-only\n";
+ } elsif (/^mount: cannot mount .* read-only$/) {
+ # filter prior to v2.30 format failed ro mount
+ print "mount: cannot mount device read-only\n";
+ } elsif (/mount:.* cannot remount .* read-write.*/) {
+ # filter failed rw remount
+ print "mount: cannot remount device read-write, is write-protected\n";
+ } else {
+ print "$_";
+ }' | _filter_ending_dot
}
# Filter a failed mount output due to EUCLEAN and USTALE, util-linux changed
diff --git a/tests/generic/050 b/tests/generic/050
index 5fa28a7648e5..efa45f04825b 100755
--- a/tests/generic/050
+++ b/tests/generic/050
@@ -60,7 +60,7 @@ blockdev --setro $SCRATCH_DEV
# Mount it, and make sure we can't write to it, and we can unmount it again
#
echo "mounting read-only block device:"
-_scratch_mount 2>&1 | _filter_scratch | _filter_ro_mount
+_scratch_mount 2>&1 | _filter_ro_mount
echo "touching file on read-only filesystem (should fail)"
touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
@@ -95,10 +95,10 @@ blockdev --setro $SCRATCH_DEV
# -o norecovery is used.
#
echo "mounting filesystem that needs recovery on a read-only device:"
-_scratch_mount 2>&1 | _filter_scratch | _filter_ro_mount
+_scratch_mount 2>&1 | _filter_ro_mount
echo "unmounting read-only filesystem"
-_scratch_unmount 2>&1 | _filter_scratch
+_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
#
# This is the way out if the underlying device really is read-only.
@@ -106,7 +106,7 @@ _scratch_unmount 2>&1 | _filter_scratch
# data recovery hack.
#
echo "mounting filesystem with -o norecovery on a read-only device:"
-_scratch_mount -o norecovery 2>&1 | _filter_scratch | _filter_ro_mount
+_scratch_mount -o norecovery 2>&1 | _filter_ro_mount
echo "unmounting read-only filesystem"
_scratch_unmount 2>&1 | _filter_scratch
diff --git a/tests/generic/050.out b/tests/generic/050.out
index fb90f6ea5819..7d70ddee83cb 100644
--- a/tests/generic/050.out
+++ b/tests/generic/050.out
@@ -1,7 +1,7 @@
QA output created by 050
setting device read-only
mounting read-only block device:
-mount: SCRATCH_DEV is write-protected, mounting read-only
+mount: device write-protected, mounting read-only
touching file on read-only filesystem (should fail)
touch: cannot touch 'SCRATCH_MNT/foo': Read-only file system
unmounting read-only filesystem
@@ -12,12 +12,12 @@ going down:
unmounting shutdown filesystem:
setting device read-only
mounting filesystem that needs recovery on a read-only device:
-mount: SCRATCH_DEV is write-protected, mounting read-only
-mount: cannot mount SCRATCH_DEV read-only
+mount: device write-protected, mounting read-only
+mount: cannot mount device read-only
unmounting read-only filesystem
umount: SCRATCH_DEV: not mounted
mounting filesystem with -o norecovery on a read-only device:
-mount: SCRATCH_DEV is write-protected, mounting read-only
+mount: device write-protected, mounting read-only
unmounting read-only filesystem
setting device read-write
mounting filesystem that needs recovery with -o ro:
diff --git a/tests/overlay/035 b/tests/overlay/035
index 64fcd708105e..05447741a1ba 100755
--- a/tests/overlay/035
+++ b/tests/overlay/035
@@ -69,7 +69,7 @@ mkdir -p $lowerdir1 $lowerdir2 $upperdir $workdir
$MOUNT_PROG -t overlay -o"lowerdir=$lowerdir2:$lowerdir1" \
$OVL_BASE_SCRATCH_MNT $SCRATCH_MNT
touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
-_scratch_remount rw 2>&1 | _filter_scratch
+_scratch_remount rw 2>&1 | _filter_ro_mount
$UMOUNT_PROG $SCRATCH_MNT
# Make workdir immutable to prevent workdir re-create on mount
@@ -79,7 +79,7 @@ $CHATTR_PROG +i $workdir
# Verify that overlay is mounted read-only and that it cannot be remounted rw.
_overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir
touch $SCRATCH_MNT/bar 2>&1 | _filter_scratch
-_scratch_remount rw 2>&1 | _filter_scratch
+_scratch_remount rw 2>&1 | _filter_ro_mount
# success, all done
status=0
diff --git a/tests/overlay/035.out b/tests/overlay/035.out
index 5a5f67771402..e08ba2ebc691 100644
--- a/tests/overlay/035.out
+++ b/tests/overlay/035.out
@@ -1,5 +1,5 @@
QA output created by 035
touch: cannot touch 'SCRATCH_MNT/foo': Read-only file system
-mount: cannot remount SCRATCH_DEV read-write, is write-protected
+mount: cannot remount device read-write, is write-protected
touch: cannot touch 'SCRATCH_MNT/bar': Read-only file system
-mount: cannot remount SCRATCH_DEV read-write, is write-protected
+mount: cannot remount device read-write, is write-protected
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
