On Thu, Nov 02, 2017 at 09:27:17PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
>
> Make sure we can write to and read from the highest possible offset
> that Linux will allow. Format the filesystem with a variety of
> possible blocksizes to stress the filesystem.
>
> Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> ---
> v2: fixes suggested by eryu
> ---
> tests/generic/705 | 98 +++++++++++++++++++++++++++++++++++++++++++++++++
> tests/generic/705.out | 2 +
> tests/generic/group | 1 +
> 3 files changed, 101 insertions(+)
> create mode 100755 tests/generic/705
> create mode 100644 tests/generic/705.out
>
> diff --git a/tests/generic/705 b/tests/generic/705
> new file mode 100755
> index 0000000..18916c3
> --- /dev/null
> +++ b/tests/generic/705
> @@ -0,0 +1,98 @@
> +#! /bin/bash
> +# FS QA Test No. 705
> +#
> +# Check that high-offset reads and writes work.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017, Oracle and/or its affiliates. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -rf $tmp.*
I did some minor edits, removed 'r' from rm.
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_os Linux
Added _supported_fs generic
> +_require_scratch_nocheck
> +
> +rm -f $seqres.full
> +
> +echo "Silence is golden"
> +
> +echo "Starting test" > $seqres.full
> +devsize=$(blockdev --getsize64 $SCRATCH_DEV)
> +for blocksize in 512 1024 2048 4096 8192 16384 32768 65536; do
> + echo "+ Format blocksize $blocksize and mount" >> $seqres.full
> + _scratch_unmount > /dev/null 2>&1
> + # Try to format and mount with the given blocksize. If they don't
> + # succeed, move on to the next block size.
> + unset MKFS_OPTIONS
Moved this unset out of the for loop.
Thanks,
Eryu
> + if ! _scratch_mkfs_sized $devsize $blocksize >> $seqres.full 2>&1 ||
> + ! _scratch_mount >> $seqres.full 2>&1 ||
> + test "$(stat -f -c '%S' $SCRATCH_MNT)" -ne "$blocksize"; then
> + echo "+++ Format and mount failed" >> $seqres.full
> + continue
> + fi
> +
> + testdir=$SCRATCH_MNT/test-$seq
> + mkdir $testdir
> +
> + echo "++ Create the original files" >> $seqres.full
> + bigoff=$(echo "2^63 - 2" | $BC_PROG)
> + len=$(echo "2^63 - 1" | $BC_PROG)
> + $XFS_IO_PROG -f -c "truncate $len" $testdir/file0 >> $seqres.full 2>&1
> + if [ ! -s $testdir/file0 ]; then
> + # If we can't set a large file size then don't bother
> + # with this blocksize because the fs doesn't support it.
> + echo "+++ High offset ftruncate failed" >> $seqres.full
> + continue
> + fi
> + _pwrite_byte 0x61 $bigoff 1 $testdir/file1 >> $seqres.full
> +
> + echo "++ Check file creation" >> $seqres.full
> + _scratch_cycle_mount
> +
> + expected="7ffffffffffffffe: 61 a"
> + actual="$($XFS_IO_PROG -c "pread -v -q $bigoff 1" $testdir/file1)"
> + if [ "$expected" = "$actual" ]; then
> + echo "+++ Success!" >> $seqres.full
> + else
> + echo "+++ Discrepancy @ blocksize $blocksize" >> $seqres.full
> + echo "Discrepancy @ blocksize $blocksize"
> + fi
> +
> + echo "++ Check scratchfs" >> $seqres.full
> + _check_scratch_fs
> +done
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/generic/705.out b/tests/generic/705.out
> new file mode 100644
> index 0000000..6fcdec0
> --- /dev/null
> +++ b/tests/generic/705.out
> @@ -0,0 +1,2 @@
> +QA output created by 705
> +Silence is golden
> diff --git a/tests/generic/group b/tests/generic/group
> index fbe0a7f..2c55b93 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -468,3 +468,4 @@
> 463 auto quick clone dangerous
> 464 auto rw
> 465 auto rw quick aio
> +705 auto quick rw
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
