Remove variables that can be replaced with a direct access to the opts
table, so we have it all in a single place, accessible from anywhere.
In future, we can remove some instances where we are passing values as
arguments to helper functions, when we have the values in the opts
struct and could pass only the struct. But for now, limit the changes
to simple replacement without any change in the logic.
Signed-off-by: Jan Tulak <jtulak@xxxxxxxxxx>
---
mkfs/xfs_mkfs.c | 71 ++++++++++++++++++++++++++++++---------------------------
1 file changed, 37 insertions(+), 34 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 51c1a794..aeb62589 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -1711,7 +1711,6 @@ main(
xfs_mount_t mbuf;
xfs_extlen_t nbmblocks;
int nlflag;
- int norsflag;
xfs_alloc_rec_t *nrec;
int nsflag;
int nvflag;
@@ -1722,10 +1721,8 @@ main(
char *protostring;
int qflag;
xfs_rfsblock_t rtblocks;
- uint64_t rtbytes;
xfs_extlen_t rtextblocks;
xfs_rtblock_t rtextents;
- uint64_t rtextbytes;
char *rtfile;
xfs_sb_t *sbp;
uint64_t sector_mask;
@@ -1768,9 +1765,8 @@ main(
qflag = false;
dfile = logfile = rtfile = NULL;
protofile = NULL;
- rtbytes = rtextbytes = 0;
lalign = 0;
- dsflag = norsflag = false;
+ dsflag = false;
force_overwrite = false;
worst_freelist = 0;
memset(&fsx, 0, sizeof(fsx));
@@ -2139,9 +2135,8 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case R_EXTSIZE:
- rtextbytes = parse_conf_val(OPT_R,
- R_EXTSIZE,
- value);
+ parse_conf_val(OPT_R, R_EXTSIZE,
+ value);
break;
case R_FILE:
xi.risfile = parse_conf_val(OPT_R,
@@ -2156,13 +2151,11 @@ main(
set_conf_val(OPT_R, R_DEV, 1);
break;
case R_SIZE:
- rtbytes = parse_conf_val(OPT_R, R_SIZE,
- value);
+ parse_conf_val(OPT_R, R_SIZE, value);
break;
case R_NOALIGN:
- norsflag = parse_conf_val(OPT_R,
- R_NOALIGN,
- value);
+ parse_conf_val(OPT_R, R_NOALIGN,
+ value);
break;
default:
unknown('r', value);
@@ -2271,7 +2264,10 @@ _("Minimum block size for CRC enabled filesystems is %d bytes.\n"),
!xi.logname, Nflag ? NULL : &xi.lcreat,
force_overwrite, "l");
if (xi.rtname)
- check_device_type(xi.rtname, &xi.risfile, !rtbytes, !xi.rtname,
+ check_device_type(xi.rtname,
+ &xi.risfile,
+ !get_conf_val(OPT_R, R_SIZE),
+ !xi.rtname,
Nflag ? NULL : &xi.rcreat,
force_overwrite, "r");
if (xi.disfile || xi.lisfile || xi.risfile)
@@ -2520,33 +2516,36 @@ _("rmapbt not supported with realtime devices\n"));
(long long)(logblocks <<
get_conf_val(OPT_B, B_LOG)));
}
- if (rtbytes) {
- if (rtbytes % XFS_MIN_BLOCKSIZE) {
+ if (get_conf_val(OPT_R, R_SIZE)) {
+ if (get_conf_val(OPT_R, R_SIZE) % XFS_MIN_BLOCKSIZE) {
fprintf(stderr,
_("illegal rt length %lld, not a multiple of %d\n"),
- (long long)rtbytes, XFS_MIN_BLOCKSIZE);
+ get_conf_val(OPT_R, R_SIZE), XFS_MIN_BLOCKSIZE);
usage();
}
- rtblocks = (xfs_rfsblock_t)(rtbytes >>
+ rtblocks = (xfs_rfsblock_t)(get_conf_val(OPT_R, R_SIZE) >>
get_conf_val(OPT_B, B_LOG));
- if (rtbytes % get_conf_val(OPT_B, B_SIZE))
+ if (get_conf_val(OPT_R, R_SIZE) % get_conf_val(OPT_B, B_SIZE))
fprintf(stderr,
_("warning: rt length %lld not a multiple of %lld, truncated to %lld\n"),
- (long long)rtbytes, get_conf_val(OPT_B, B_SIZE),
+ get_conf_val(OPT_R, R_SIZE),
+ get_conf_val(OPT_B, B_SIZE),
(long long)(rtblocks <<
get_conf_val(OPT_B, B_LOG)));
}
/*
* If specified, check rt extent size against its constraints.
*/
- if (rtextbytes) {
- if (rtextbytes % get_conf_val(OPT_B, B_SIZE)) {
+ if (get_conf_val(OPT_R, R_EXTSIZE)) {
+ if (get_conf_val(OPT_R, R_EXTSIZE) %
+ get_conf_val(OPT_B, B_SIZE)) {
fprintf(stderr,
_("illegal rt extent size %lld, not a multiple of %lld\n"),
- (long long)rtextbytes, get_conf_val(OPT_B, B_SIZE));
+ get_conf_val(OPT_R, R_EXTSIZE),
+ get_conf_val(OPT_B, B_SIZE));
usage();
}
- rtextblocks = (xfs_extlen_t)(rtextbytes >>
+ rtextblocks = (xfs_extlen_t)(get_conf_val(OPT_R, R_EXTSIZE) >>
get_conf_val(OPT_B, B_LOG));
} else {
/*
@@ -2555,20 +2554,23 @@ _("rmapbt not supported with realtime devices\n"));
* to the stripe width.
*/
uint64_t rswidth;
- uint64_t rtextbytes;
- if (!norsflag && !xi.risfile && !(!rtbytes && xi.disfile))
+ if (!get_conf_val(OPT_R, R_NOALIGN) && !xi.risfile &&
+ !(!get_conf_val(OPT_R, R_SIZE) && xi.disfile))
rswidth = ft.rtswidth;
else
rswidth = 0;
/* check that rswidth is a multiple of fs B_SIZE */
- if (!norsflag && rswidth &&
+ if (!get_conf_val(OPT_R, R_NOALIGN) && rswidth &&
!(BBTOB(rswidth) % get_conf_val(OPT_B, B_SIZE))) {
rswidth = DTOBT(rswidth);
- rtextbytes = rswidth << get_conf_val(OPT_B, B_LOG);
- if (XFS_MIN_RTEXTSIZE <= rtextbytes &&
- (rtextbytes <= XFS_MAX_RTEXTSIZE)) {
+ set_conf_val(OPT_R, R_EXTSIZE,
+ rswidth << get_conf_val(OPT_B, B_LOG));
+ if (XFS_MIN_RTEXTSIZE <=
+ get_conf_val(OPT_R, R_EXTSIZE) &&
+ (get_conf_val(OPT_R, R_EXTSIZE) <=
+ XFS_MAX_RTEXTSIZE)) {
rtextblocks = rswidth;
}
}
@@ -2741,7 +2743,7 @@ reported by the device (%u).\n"),
reported by the device (%u).\n"),
get_conf_val(OPT_L, L_SECTSIZE), xi.lbsize);
}
- if (rtbytes && xi.rtsize > 0 &&
+ if (get_conf_val(OPT_R, R_SIZE) && xi.rtsize > 0 &&
xi.rtbsize > get_conf_val(OPT_D, D_SECTSIZE)) {
fprintf(stderr, _(
"Warning: the realtime subvolume sector size %lld is less than the sector size\n\
@@ -2749,16 +2751,17 @@ reported by the device (%u).\n"),
get_conf_val(OPT_D, D_SECTSIZE), xi.rtbsize);
}
- if (rtbytes && xi.rtsize > 0 && rtblocks > DTOBT(xi.rtsize)) {
+ if (get_conf_val(OPT_R, R_SIZE) && xi.rtsize > 0 &&
+ rtblocks > DTOBT(xi.rtsize)) {
fprintf(stderr,
_("size %s specified for rt subvolume is too large, "
"maximum is %lld blocks\n"),
get_conf_raw_safe(OPT_R, R_SIZE),
(long long)DTOBT(xi.rtsize));
usage();
- } else if (!rtbytes && xi.rtsize > 0)
+ } else if (!get_conf_val(OPT_R, R_SIZE) && xi.rtsize > 0)
rtblocks = DTOBT(xi.rtsize);
- else if (rtbytes && !xi.rtdev) {
+ else if (get_conf_val(OPT_R, R_SIZE) && !xi.rtdev) {
fprintf(stderr,
_("size specified for non-existent rt subvolume\n"));
usage();
--
2.13.3
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
