On Fri, Aug 04, 2017 at 08:45:02AM +0800, Eryu Guan wrote:
> On Thu, Aug 03, 2017 at 08:49:00AM -0700, Darrick J. Wong wrote:
> > Refactor the XFS error injection helpers to use the new errortag
> > interface to configure error injection. If that isn't present, fall
> > back either to the xfs_io/ioctl based injection or the older sysfs
> > knobs. Refactor existing testcases to use the new helpers.
> >
> > Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> > ---
> > v2: fix name of the 'find knob' function to communicate that it takes a
> > mountpoint's device, not the mountpoint itself; check for debug before
> > we check for knobs
> > ---
> > common/inject | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> > tests/xfs/141 | 5 +++--
> > tests/xfs/196 | 17 ++++++----------
> > 3 files changed, 66 insertions(+), 15 deletions(-)
> >
> > diff --git a/common/inject b/common/inject
> > index 8ecc290..c1b7869 100644
> > --- a/common/inject
> > +++ b/common/inject
> > @@ -35,12 +35,49 @@ _require_error_injection()
> > esac
> > }
> >
> > +# Find the errortag injection knob in sysfs for a given xfs mount's
> > +# block device.
> > +_find_xfs_mountdev_errortag_knob()
> > +{
> > + dev="$1"
> > + knob="$2"
> > + shortdev="$(_short_dev "${dev}")"
> > + tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}"
> > +
> > + # Some of the new sysfs errortag knobs were previously available via
> > + # another sysfs path.
> > + case "${knob}" in
> > + "log_bad_crc")
> > + if [ ! -w "${tagfile}" ]; then
> > + tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor"
> > + fi
> > + ;;
> > + "drop_writes")
> > + if [ ! -w "${tagfile}" ]; then
> > + tagfile="/sys/fs/xfs/${shortdev}/drop_writes"
> > + fi
> > + if [ ! -w "${tagfile}" ]; then
> > + tagfile="/sys/fs/xfs/${shortdev}/fail_writes"
> > + fi
> > + ;;
> > + *)
> > + ;;
> > + esac
> > +
> > + echo "${tagfile}"
> > +}
> > +
> > # Requires that xfs_io inject command knows about this error type
> > _require_xfs_io_error_injection()
> > {
> > type="$1"
> > _require_error_injection
> >
> > + # Can we find the error injection knobs via the new errortag
> > + # configuration mechanism?
> > + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")"
> > + test -w "${knob}" && return
> > +
> > # NOTE: We can't actually test error injection here because xfs
> > # hasn't always range checked the argument to xfs_errortag_add.
> > # We also don't want to trip an error before we're ready to deal
> > @@ -54,16 +91,34 @@ _require_xfs_io_error_injection()
> > _test_inject_error()
> > {
> > type="$1"
> > + value="$2"
> >
> > - $XFS_IO_PROG -x -c "inject $type" $TEST_DIR
> > + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")"
> > + if [ -w "${knob}" ]; then
> > + test -z "${value}" && value="default"
> > + echo -n "${value}" > "${knob}"
> > + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then
> > + $XFS_IO_PROG -x -c "inject $type" $TEST_DIR
> > + else
> > + _notrun "Cannot inject error ${type} value ${value}."
>
> (Seems you missed the comments on this "_notrun" in my first reply :)
>
> I don't think _notrun belongs here, because at this point we should have
> already made sure, by _require_xfs_io_error_injection, that XFS does
> support the error injection we want. Something went wrong If we failed
> to inject the error. So I think "_fail" is more appropriate.
Oops. Will send v3 fixing both.
> > + fi
> > }
> >
> > # Inject an error into the scratch fs
> > _scratch_inject_error()
> > {
> > type="$1"
> > + value="$2"
> >
> > - $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT
> > + knob="$(_find_xfs_mountdev_errortag_knob "${SCRATCH_DEV}" "${type}")"
> > + if [ -w "${knob}" ]; then
> > + test -z "${value}" && value="default"
> > + echo -n "${value}" > "${knob}"
> > + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then
> > + $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT
> > + else
> > + _notrun "Cannot inject error ${type} value ${value}."
>
> Same here.
>
> Thanks,
> Eryu
>
> > + fi
> > }
> >
> > # Unmount and remount the scratch device, dumping the log
> > diff --git a/tests/xfs/141 b/tests/xfs/141
> > index 56ff14e..f61e524 100755
> > --- a/tests/xfs/141
> > +++ b/tests/xfs/141
> > @@ -47,13 +47,14 @@ rm -f $seqres.full
> >
> > # get standard environment, filters and checks
> > . ./common/rc
> > +. ./common/inject
> >
> > # real QA test starts here
> >
> > # Modify as appropriate.
> > _supported_fs xfs
> > _supported_os Linux
> > -_require_xfs_sysfs $(_short_dev $TEST_DEV)/log/log_badcrc_factor
> > +_require_xfs_io_error_injection "log_bad_crc"
> > _require_scratch
> > _require_command "$KILLALL_PROG" killall
> >
> > @@ -69,7 +70,7 @@ for i in $(seq 1 5); do
> > # (increase this value to run fsstress longer).
> > factor=$((RANDOM % 100 + 1))
> > echo iteration $i log_badcrc_factor: $factor >> $seqres.full 2>&1
> > - echo $factor > /sys/fs/xfs/$sdev/log/log_badcrc_factor
> > + _scratch_inject_error "log_bad_crc" "$factor"
> >
> > # Run fsstress until the filesystem shuts down. It will shut down
> > # automatically when error injection triggers.
> > diff --git a/tests/xfs/196 b/tests/xfs/196
> > index e9b0649..fe3f570 100755
> > --- a/tests/xfs/196
> > +++ b/tests/xfs/196
> > @@ -45,6 +45,7 @@ _cleanup()
> > # get standard environment, filters and checks
> > . ./common/rc
> > . ./common/punch
> > +. ./common/inject
> >
> > # real QA test starts here
> > rm -f $seqres.full
> > @@ -53,13 +54,7 @@ rm -f $seqres.full
> > _supported_fs generic
> > _supported_os Linux
> > _require_scratch
> > -
> > -DROP_WRITES="drop_writes"
> > -# replace "drop_writes" with "fail_writes" for old kernel
> > -if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then
> > - DROP_WRITES="fail_writes"
> > -fi
> > -_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES}
> > +_require_xfs_io_error_injection "drop_writes"
> >
> > _scratch_mkfs >/dev/null 2>&1
> > _scratch_mount
> > @@ -72,7 +67,7 @@ bytes=$((64 * 1024))
> > $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1
> >
> > # Enable write drops. All buffered writes are dropped from this point on.
> > -echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
> > +_scratch_inject_error "drop_writes" 1
> >
> > # Write every other 4k range to split the larger delalloc extent into many more
> > # smaller extents. Use pwrite because with write failures enabled, all
> > @@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do
> > $XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1
> > done
> >
> > -echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
> > +_scratch_inject_error "drop_writes" 0
> >
> > _scratch_cycle_mount
> > $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap
> > @@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do
> > $XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1
> >
> > punchoffset=$((offset + 75))
> > - echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
> > + _scratch_inject_error "drop_writes"
> > $XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1
> > - echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
> > + _scratch_inject_error "drop_writes" 0
> > done
> >
> > echo "Silence is golden."
> > --
> > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
