Previously, our XFS fuzzing efforts were limited to using the xfs_db blocktrash command to scribble garbage all over a block. This is pretty easy to discover; it would be far more interesting if we could fuzz individual fields looking for unhandled corner cases. Since we now have an online scrub tool, use it to check for our targeted corruptions prior to the usual steps of writing to the FS, taking it offline, repairing, and re-checking. These tests use the new xfs_db 'fuzz' command to test corner case handling of every field. The 'print' command tells us which fields are available, and the fuzz command can write zeroes or ones to the field; set the high, middle, or low bit; add or subtract numbers; or randomize the field. We loop through all fields and all fuzz verbs to see if we can trip up the kernel. Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx> --- common/fuzzy | 96 ++++++++++++++++++++++++++++++++++++++++----------- common/populate | 10 +++-- tests/ext4/1300 | 60 ++++++++++++++++++++++++++++++++ tests/ext4/1300.out | 3 ++ tests/ext4/group | 1 + tests/xfs/1300 | 63 +++++++++++++++++++++++++++++++++ tests/xfs/1300.out | 3 ++ tests/xfs/1301 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1301.out | 4 ++ tests/xfs/1302 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1302.out | 4 ++ tests/xfs/1303 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1303.out | 6 +++ tests/xfs/1304 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1304.out | 4 ++ tests/xfs/1305 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1305.out | 4 ++ tests/xfs/1306 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1306.out | 4 ++ tests/xfs/1307 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1307.out | 4 ++ tests/xfs/1308 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1308.out | 4 ++ tests/xfs/1309 | 61 ++++++++++++++++++++++++++++++++ tests/xfs/1309.out | 4 ++ tests/xfs/1310 | 61 ++++++++++++++++++++++++++++++++ tests/xfs/1310.out | 4 ++ tests/xfs/1311 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1311.out | 4 ++ tests/xfs/1312 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1312.out | 4 ++ tests/xfs/1313 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1313.out | 5 +++ tests/xfs/1314 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1314.out | 5 +++ tests/xfs/1315 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1315.out | 5 +++ tests/xfs/1316 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1316.out | 5 +++ tests/xfs/1317 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1317.out | 5 +++ tests/xfs/1318 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1318.out | 5 +++ tests/xfs/1319 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1319.out | 5 +++ tests/xfs/1320 | 66 +++++++++++++++++++++++++++++++++++ tests/xfs/1320.out | 5 +++ tests/xfs/1321 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1321.out | 5 +++ tests/xfs/1322 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1322.out | 5 +++ tests/xfs/1323 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1323.out | 5 +++ tests/xfs/1324 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1324.out | 5 +++ tests/xfs/1325 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1325.out | 5 +++ tests/xfs/1326 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1326.out | 5 +++ tests/xfs/1327 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1327.out | 5 +++ tests/xfs/1328 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1328.out | 5 +++ tests/xfs/1329 | 64 ++++++++++++++++++++++++++++++++++ tests/xfs/1329.out | 4 ++ tests/xfs/1330 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1330.out | 4 ++ tests/xfs/1331 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1331.out | 4 ++ tests/xfs/1332 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1332.out | 5 +++ tests/xfs/1333 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1333.out | 5 +++ tests/xfs/1334 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1334.out | 5 +++ tests/xfs/1341 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1341.out | 4 ++ tests/xfs/1342 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1342.out | 4 ++ tests/xfs/1343 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1343.out | 6 +++ tests/xfs/1344 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1344.out | 4 ++ tests/xfs/1345 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1345.out | 4 ++ tests/xfs/1346 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1346.out | 4 ++ tests/xfs/1347 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1347.out | 4 ++ tests/xfs/1348 | 60 ++++++++++++++++++++++++++++++++ tests/xfs/1348.out | 4 ++ tests/xfs/1349 | 61 ++++++++++++++++++++++++++++++++ tests/xfs/1349.out | 4 ++ tests/xfs/1350 | 61 ++++++++++++++++++++++++++++++++ tests/xfs/1350.out | 4 ++ tests/xfs/1351 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1351.out | 4 ++ tests/xfs/1352 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1352.out | 4 ++ tests/xfs/1353 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1353.out | 5 +++ tests/xfs/1354 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1354.out | 5 +++ tests/xfs/1355 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1355.out | 5 +++ tests/xfs/1356 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1356.out | 5 +++ tests/xfs/1357 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1357.out | 5 +++ tests/xfs/1358 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1358.out | 5 +++ tests/xfs/1359 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1359.out | 5 +++ tests/xfs/1360 | 66 +++++++++++++++++++++++++++++++++++ tests/xfs/1360.out | 5 +++ tests/xfs/1361 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1361.out | 5 +++ tests/xfs/1362 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1362.out | 5 +++ tests/xfs/1363 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1363.out | 5 +++ tests/xfs/1364 | 67 ++++++++++++++++++++++++++++++++++++ tests/xfs/1364.out | 5 +++ tests/xfs/1365 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1365.out | 5 +++ tests/xfs/1366 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1366.out | 5 +++ tests/xfs/1367 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1367.out | 5 +++ tests/xfs/1368 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1368.out | 5 +++ tests/xfs/1369 | 64 ++++++++++++++++++++++++++++++++++ tests/xfs/1369.out | 4 ++ tests/xfs/1370 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1370.out | 4 ++ tests/xfs/1371 | 62 +++++++++++++++++++++++++++++++++ tests/xfs/1371.out | 4 ++ tests/xfs/1372 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1372.out | 5 +++ tests/xfs/1373 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1373.out | 5 +++ tests/xfs/1374 | 65 +++++++++++++++++++++++++++++++++++ tests/xfs/1374.out | 5 +++ tests/xfs/group | 69 +++++++++++++++++++++++++++++++++++++ 144 files changed, 4923 insertions(+), 26 deletions(-) create mode 100755 tests/ext4/1300 create mode 100644 tests/ext4/1300.out create mode 100755 tests/xfs/1300 create mode 100644 tests/xfs/1300.out create mode 100755 tests/xfs/1301 create mode 100644 tests/xfs/1301.out create mode 100755 tests/xfs/1302 create mode 100644 tests/xfs/1302.out create mode 100755 tests/xfs/1303 create mode 100644 tests/xfs/1303.out create mode 100755 tests/xfs/1304 create mode 100644 tests/xfs/1304.out create mode 100755 tests/xfs/1305 create mode 100644 tests/xfs/1305.out create mode 100755 tests/xfs/1306 create mode 100644 tests/xfs/1306.out create mode 100755 tests/xfs/1307 create mode 100644 tests/xfs/1307.out create mode 100755 tests/xfs/1308 create mode 100644 tests/xfs/1308.out create mode 100755 tests/xfs/1309 create mode 100644 tests/xfs/1309.out create mode 100755 tests/xfs/1310 create mode 100644 tests/xfs/1310.out create mode 100755 tests/xfs/1311 create mode 100644 tests/xfs/1311.out create mode 100755 tests/xfs/1312 create mode 100644 tests/xfs/1312.out create mode 100755 tests/xfs/1313 create mode 100644 tests/xfs/1313.out create mode 100755 tests/xfs/1314 create mode 100644 tests/xfs/1314.out create mode 100755 tests/xfs/1315 create mode 100644 tests/xfs/1315.out create mode 100755 tests/xfs/1316 create mode 100644 tests/xfs/1316.out create mode 100755 tests/xfs/1317 create mode 100644 tests/xfs/1317.out create mode 100755 tests/xfs/1318 create mode 100644 tests/xfs/1318.out create mode 100755 tests/xfs/1319 create mode 100644 tests/xfs/1319.out create mode 100755 tests/xfs/1320 create mode 100644 tests/xfs/1320.out create mode 100755 tests/xfs/1321 create mode 100644 tests/xfs/1321.out create mode 100755 tests/xfs/1322 create mode 100644 tests/xfs/1322.out create mode 100755 tests/xfs/1323 create mode 100644 tests/xfs/1323.out create mode 100755 tests/xfs/1324 create mode 100644 tests/xfs/1324.out create mode 100755 tests/xfs/1325 create mode 100644 tests/xfs/1325.out create mode 100755 tests/xfs/1326 create mode 100644 tests/xfs/1326.out create mode 100755 tests/xfs/1327 create mode 100644 tests/xfs/1327.out create mode 100755 tests/xfs/1328 create mode 100644 tests/xfs/1328.out create mode 100755 tests/xfs/1329 create mode 100644 tests/xfs/1329.out create mode 100755 tests/xfs/1330 create mode 100644 tests/xfs/1330.out create mode 100755 tests/xfs/1331 create mode 100644 tests/xfs/1331.out create mode 100755 tests/xfs/1332 create mode 100644 tests/xfs/1332.out create mode 100755 tests/xfs/1333 create mode 100644 tests/xfs/1333.out create mode 100755 tests/xfs/1334 create mode 100644 tests/xfs/1334.out create mode 100755 tests/xfs/1341 create mode 100644 tests/xfs/1341.out create mode 100755 tests/xfs/1342 create mode 100644 tests/xfs/1342.out create mode 100755 tests/xfs/1343 create mode 100644 tests/xfs/1343.out create mode 100755 tests/xfs/1344 create mode 100644 tests/xfs/1344.out create mode 100755 tests/xfs/1345 create mode 100644 tests/xfs/1345.out create mode 100755 tests/xfs/1346 create mode 100644 tests/xfs/1346.out create mode 100755 tests/xfs/1347 create mode 100644 tests/xfs/1347.out create mode 100755 tests/xfs/1348 create mode 100644 tests/xfs/1348.out create mode 100755 tests/xfs/1349 create mode 100644 tests/xfs/1349.out create mode 100755 tests/xfs/1350 create mode 100644 tests/xfs/1350.out create mode 100755 tests/xfs/1351 create mode 100644 tests/xfs/1351.out create mode 100755 tests/xfs/1352 create mode 100644 tests/xfs/1352.out create mode 100755 tests/xfs/1353 create mode 100644 tests/xfs/1353.out create mode 100755 tests/xfs/1354 create mode 100644 tests/xfs/1354.out create mode 100755 tests/xfs/1355 create mode 100644 tests/xfs/1355.out create mode 100755 tests/xfs/1356 create mode 100644 tests/xfs/1356.out create mode 100755 tests/xfs/1357 create mode 100644 tests/xfs/1357.out create mode 100755 tests/xfs/1358 create mode 100644 tests/xfs/1358.out create mode 100755 tests/xfs/1359 create mode 100644 tests/xfs/1359.out create mode 100755 tests/xfs/1360 create mode 100644 tests/xfs/1360.out create mode 100755 tests/xfs/1361 create mode 100644 tests/xfs/1361.out create mode 100755 tests/xfs/1362 create mode 100644 tests/xfs/1362.out create mode 100755 tests/xfs/1363 create mode 100644 tests/xfs/1363.out create mode 100755 tests/xfs/1364 create mode 100644 tests/xfs/1364.out create mode 100755 tests/xfs/1365 create mode 100644 tests/xfs/1365.out create mode 100755 tests/xfs/1366 create mode 100644 tests/xfs/1366.out create mode 100755 tests/xfs/1367 create mode 100644 tests/xfs/1367.out create mode 100755 tests/xfs/1368 create mode 100644 tests/xfs/1368.out create mode 100755 tests/xfs/1369 create mode 100644 tests/xfs/1369.out create mode 100755 tests/xfs/1370 create mode 100644 tests/xfs/1370.out create mode 100755 tests/xfs/1371 create mode 100644 tests/xfs/1371.out create mode 100755 tests/xfs/1372 create mode 100644 tests/xfs/1372.out create mode 100755 tests/xfs/1373 create mode 100644 tests/xfs/1373.out create mode 100755 tests/xfs/1374 create mode 100644 tests/xfs/1374.out diff --git a/common/fuzzy b/common/fuzzy index 2edcd9f..d970710 100644 --- a/common/fuzzy +++ b/common/fuzzy @@ -85,20 +85,32 @@ _scratch_scrub() { # Filter the xfs_db print command's field debug information # into field name and type. __filter_xfs_db_print_fields() { + filter="$1" + if [ -z "${filter}" ] || [ "${filter}" = "nofilter" ]; then + filter='^' + fi grep ' = ' | while read key equals value; do - fuzzkey="$(echo "${key}" | sed -e 's/\([a-zA-Z0-9_]*\)\[\([0-9]*\)-[0-9]*\]/\1[\2]/g')" - if [[ "${value}" == "["* ]]; then + # Filter out any keys with an array index >= 10, and + # collapse any array range ("[1-195]") to the first item. + fuzzkey="$(echo "${key}" | sed -e '/\([a-z]*\)\[\([0-9][0-9]\+\)\].*/d' -e 's/\([a-zA-Z0-9_]*\)\[\([0-9]*\)-[0-9]*\]/\1[\2]/g')" + if [ -z "${fuzzkey}" ]; then + continue + elif [[ "${value}" == "["* ]]; then echo "${value}" | sed -e 's/^.//g' -e 's/.$//g' -e 's/,/\n/g' | while read subfield; do echo "${fuzzkey}.${subfield}" done else echo "${fuzzkey}" fi - done + done | egrep "${filter}" } # Navigate to some part of the filesystem and print the field info. +# The first argument is an egrep filter for the fields +# The rest of the arguments are xfs_db commands to locate the metadata. _scratch_xfs_list_metadata_fields() { + filter="$1" + shift if [ -n "${SCRATCH_XFS_LIST_METADATA_FIELDS}" ]; then echo "${SCRATCH_XFS_LIST_METADATA_FIELDS}" | sed -e 's/ /\n/g' return; @@ -107,10 +119,12 @@ _scratch_xfs_list_metadata_fields() { (for arg in "$@"; do echo "${arg}" done - echo "print") | _scratch_xfs_db | __filter_xfs_db_print_fields + echo "print") | _scratch_xfs_db | __filter_xfs_db_print_fields "${filter}" } # Get a metadata field +# The first arg is the field name +# The rest of the arguments are xfs_db commands to find the metadata. _scratch_xfs_get_metadata_field() { key="$1" shift @@ -124,6 +138,9 @@ _scratch_xfs_get_metadata_field() { } # Set a metadata field +# The first arg is the field name +# The second arg is the new value +# The rest of the arguments are xfs_db commands to find the metadata. _scratch_xfs_set_metadata_field() { key="$1" value="$2" @@ -136,6 +153,9 @@ _scratch_xfs_set_metadata_field() { } # Fuzz a metadata field +# The first arg is the field name +# The second arg is the xfs_db fuzz verb +# The rest of the arguments are xfs_db commands to find the metadata. _scratch_xfs_fuzz_metadata_field() { key="$1" value="$2" @@ -163,7 +183,7 @@ _scratch_xfs_fuzz_metadata_field() { # Try to forcibly unmount the scratch fs __scratch_xfs_fuzz_unmount() { - while ! _scratch_unmount 2>/dev/null; do sleep 0.2; done + while _scratch_unmount 2>/dev/null; do sleep 0.2; done } # Restore metadata to scratch device prior to field-fuzzing. @@ -180,11 +200,15 @@ __fuzz_notify() { test -w /dev/ttyprintk && echo "$@" >> /dev/ttyprintk } -# Fuzz one field of some piece of metadata +# Fuzz one field of some piece of metadata. +# First arg is the field name +# Second arg is the fuzz verb (ones, zeroes, random, add, sub...) +# Third arg is the repair mode (online, offline, both) __scratch_xfs_fuzz_field_test() { field="$1" fuzzverb="$2" - shift; shift + repair="$3" + shift; shift; shift # Set the new field value __fuzz_notify "+ Fuzz ${field} = ${fuzzverb}" @@ -198,33 +222,51 @@ __scratch_xfs_fuzz_field_test() { _scratch_mount 2>&1 res=$? if [ $res -eq 0 ]; then - _scratch_scrub -a 1 -e continue 2>&1 + echo "++ Online scrub" + _scratch_scrub -n -a 1 -e continue 2>&1 res=$? test $res -eq 0 && \ (>&2 echo "scrub didn't fail with ${field} = ${fuzzverb}.") - # Try modifying the filesystem! - __fuzz_notify "++ Try to write filesystem" - #_scratch_fuzz_modify 100 2>&1 + # Try fixing the filesystem online?! + if [ "${repair}" = "online" ] || [ "${repair}" = "both" ]; then + __fuzz_notify "++ Try to repair filesystem online" + _scratch_scrub -y 2>&1 + res=$? + test $res -ne 0 && \ + (>&2 echo "online repair failed ($res) with ${field} = ${fuzzverb}.") + fi + __scratch_xfs_fuzz_unmount + elif [ "${repair}" = "online" ] || [ "${repair}" = "both" ]; then + (>&2 echo "mount failed ($res) with ${field} = ${fuzzverb}.") fi - # Repair the filesystem - echo "+ Fix the error" - _repair_scratch_fs 2>&1 + # Repair the filesystem offline? + if [ "${repair}" = "offline" ] || [ "${repair}" = "both" ]; then + echo "+ Try to repair the filesystem offline" + _repair_scratch_fs 2>&1 + res=$? + test $res -ne 0 && \ + (>&2 echo "offline repair failed ($res) with ${field} = ${fuzzverb}.") + fi + + # See if repair finds a clean fs + echo "+ Make sure error is gone (offline)" + _scratch_xfs_repair -n 2>&1 res=$? test $res -ne 0 && \ - (>&2 echo "repair failed ($res) with ${field} = ${fuzzverb}.") + (>&2 echo "offline re-scrub ($res) with ${field} = ${fuzzverb}.") # See if scrub finds a clean fs - echo "+ Make sure error is gone" + echo "+ Make sure error is gone (online)" _scratch_mount 2>&1 res=$? if [ $res -eq 0 ]; then _scratch_scrub -e continue 2>&1 res=$? test $res -ne 0 && \ - (>&2 echo "re-scrub ($res) with ${field} = ${fuzzverb}.") + (>&2 echo "online re-scrub ($res) with ${field} = ${fuzzverb}.") # Try modifying the filesystem again! __fuzz_notify "++ Try to write filesystem again" @@ -235,6 +277,7 @@ __scratch_xfs_fuzz_field_test() { fi # See if repair finds a clean fs + echo "+ Re-check the filesystem (offline)" _scratch_xfs_repair -n 2>&1 res=$? test $res -ne 0 && \ @@ -261,12 +304,23 @@ _scratch_xfs_list_fuzz_verbs() { sed -e 's/[,.]//g' -e 's/Verbs: //g' -e 's/ /\n/g' } -# Fuzz the fields of some piece of metadata -_scratch_xfs_fuzz_fields() { - _scratch_xfs_list_metadata_fields "$@" | while read field; do +# Fuzz some of the fields of some piece of metadata +# The first argument is an egrep filter for the field names +# The second argument is the repair mode (online, offline, both) +# The rest of the arguments are xfs_db commands to locate the metadata. +# +# Users can specify the fuzz verbs via SCRATCH_XFS_LIST_FUZZ_VERBS +# They can specify the fields via SCRATCH_XFS_LIST_METADATA_FIELDS +_scratch_xfs_fuzz_metadata() { + filter="$1" + repair="$2" + shift; shift + echo "Fields we propose to fuzz under: $@" + _scratch_xfs_list_metadata_fields "${filter}" "$@" + _scratch_xfs_list_metadata_fields "${filter}" "$@" | while read field; do _scratch_xfs_list_fuzz_verbs | while read fuzzverb; do __scratch_xfs_fuzz_mdrestore - __scratch_xfs_fuzz_field_test "${field}" "${fuzzverb}" "$@" + __scratch_xfs_fuzz_field_test "${field}" "${fuzzverb}" "${repair}" "$@" done done } diff --git a/common/populate b/common/populate index 9cd9362..353ebac 100644 --- a/common/populate +++ b/common/populate @@ -201,13 +201,13 @@ _scratch_xfs_populate() { # FMT_EXTENTS with a remote less-than-a-block value echo "+ attr extents with a remote less-than-a-block value" touch "${SCRATCH_MNT}/ATTR.FMT_EXTENTS_REMOTE3K" - $XFS_IO_PROG -f -c "pwrite -S 0x43 0 3k" "${SCRATCH_MNT}/attrvalfile" > /dev/null + $XFS_IO_PROG -f -c "pwrite -S 0x43 0 $((blksz - 300))" "${SCRATCH_MNT}/attrvalfile" > /dev/null attr -q -s user.remotebtreeattrname "${SCRATCH_MNT}/ATTR.FMT_EXTENTS_REMOTE3K" < "${SCRATCH_MNT}/attrvalfile" # FMT_EXTENTS with a remote block-size value echo "+ attr extents with a remote one-block value" touch "${SCRATCH_MNT}/ATTR.FMT_EXTENTS_REMOTE4K" - $XFS_IO_PROG -f -c "pwrite -S 0x44 0 4k" "${SCRATCH_MNT}/attrvalfile" > /dev/null + $XFS_IO_PROG -f -c "pwrite -S 0x44 0 ${blksz}" "${SCRATCH_MNT}/attrvalfile" > /dev/null attr -q -s user.remotebtreeattrname "${SCRATCH_MNT}/ATTR.FMT_EXTENTS_REMOTE4K" < "${SCRATCH_MNT}/attrvalfile" rm -rf "${SCRATCH_MNT}/attrvalfile" @@ -518,8 +518,8 @@ _scratch_xfs_populate_check() { __populate_check_xfs_aformat "${btree_attr}" "btree" __populate_check_xfs_agbtree_height "bno" __populate_check_xfs_agbtree_height "cnt" - test -n $is_rmapbt && __populate_check_xfs_agbtree_height "rmap" - test -n $is_reflink && __populate_check_xfs_agbtree_height "refcnt" + test $is_rmapbt -ne 0 && __populate_check_xfs_agbtree_height "rmap" + test $is_reflink -ne 0 && __populate_check_xfs_agbtree_height "refcnt" } # Check data fork format of ext4 file @@ -713,7 +713,7 @@ _scratch_populate_cached() { rm -rf "$(find "${POPULATE_METADUMP}" -mtime +2 2>/dev/null)" # Throw away cached image if it doesn't match our spec. - meta_descr="FSTYP ${FSTYP} MKFS_OPTIONS ${MKFS_OPTIONS} ARGS $@" + meta_descr="FSTYP ${FSTYP} MKFS_OPTIONS $(_scratch_mkfs_options) ARGS $@" cmp -s "${POPULATE_METADUMP_DESCR}" <(echo "${meta_descr}") || rm -rf "${POPULATE_METADUMP}" # Do we have a cached image? diff --git a/tests/ext4/1300 b/tests/ext4/1300 new file mode 100755 index 0000000..d073593 --- /dev/null +++ b/tests/ext4/1300 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1300 +# +# Populate a ext4 filesystem and ensure that scrub and repair are happy. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs ext4 +_require_scratch +_require_scrub + +echo "Format and populate" +_scratch_populate_cached > $seqres.full 2>&1 + +echo "Scrub" +_scratch_mount >> $seqres.full 2>&1 +_scratch_scrub >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/ext4/1300.out b/tests/ext4/1300.out new file mode 100644 index 0000000..8aaa3bb --- /dev/null +++ b/tests/ext4/1300.out @@ -0,0 +1,3 @@ +QA output created by 1300 +Format and populate +Scrub diff --git a/tests/ext4/group b/tests/ext4/group index 53fe03e..9fbaa76 100644 --- a/tests/ext4/group +++ b/tests/ext4/group @@ -34,3 +34,4 @@ 306 auto rw resize quick 307 auto ioctl rw 308 auto ioctl rw prealloc quick +1300 auto quick scrub diff --git a/tests/xfs/1300 b/tests/xfs/1300 new file mode 100755 index 0000000..e71e10f --- /dev/null +++ b/tests/xfs/1300 @@ -0,0 +1,63 @@ +#! /bin/bash +# FS QA Test No. 1300 +# +# Populate a XFS filesystem and ensure that scrub and repair are happy. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs + +_require_scratch +_require_scrub +_require_populate_commands + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Scrub" +_scratch_mount >> $seqres.full 2>&1 +_scratch_scrub >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/xfs/1300.out b/tests/xfs/1300.out new file mode 100644 index 0000000..8aaa3bb --- /dev/null +++ b/tests/xfs/1300.out @@ -0,0 +1,3 @@ +QA output created by 1300 +Format and populate +Scrub diff --git a/tests/xfs/1301 b/tests/xfs/1301 new file mode 100755 index 0000000..831198c --- /dev/null +++ b/tests/xfs/1301 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1301 +# +# Populate a XFS filesystem and fuzz every superblock field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz superblock" +_scratch_xfs_fuzz_metadata '' 'offline' 'sb 0' >> $seqres.full +echo "Done fuzzing superblock" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1301.out b/tests/xfs/1301.out new file mode 100644 index 0000000..f804acc --- /dev/null +++ b/tests/xfs/1301.out @@ -0,0 +1,4 @@ +QA output created by 1301 +Format and populate +Fuzz superblock +Done fuzzing superblock diff --git a/tests/xfs/1302 b/tests/xfs/1302 new file mode 100755 index 0000000..6b43d63 --- /dev/null +++ b/tests/xfs/1302 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1302 +# +# Populate a XFS filesystem and fuzz every AGF field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1302 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz AGF" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' >> $seqres.full +echo "Done fuzzing AGF" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1302.out b/tests/xfs/1302.out new file mode 100644 index 0000000..1e416d5 --- /dev/null +++ b/tests/xfs/1302.out @@ -0,0 +1,4 @@ +QA output created by 1302 +Format and populate +Fuzz AGF +Done fuzzing AGF diff --git a/tests/xfs/1303 b/tests/xfs/1303 new file mode 100755 index 0000000..fb608a6 --- /dev/null +++ b/tests/xfs/1303 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1303 +# +# Populate a XFS filesystem and fuzz every AGFL field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz AGFL" +_scratch_xfs_fuzz_metadata '' 'offline' 'agfl 0' >> $seqres.full +echo "Done fuzzing AGFL" + +echo "Fuzz AGFL flfirst" +flfirst=$(_scratch_xfs_db -c 'agf 0' -c 'p flfirst' | sed -e 's/flfirst = //g') +SCRATCH_XFS_LIST_METADATA_FIELDS="bno[${flfirst}]" _scratch_xfs_fuzz_metadata '' 'offline' 'agfl 0' >> $seqres.full +echo "Done fuzzing AGFL flfirst" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1303.out b/tests/xfs/1303.out new file mode 100644 index 0000000..d8afaf4 --- /dev/null +++ b/tests/xfs/1303.out @@ -0,0 +1,6 @@ +QA output created by 1303 +Format and populate +Fuzz AGFL +Done fuzzing AGFL +Fuzz AGFL flfirst +Done fuzzing AGFL flfirst diff --git a/tests/xfs/1304 b/tests/xfs/1304 new file mode 100755 index 0000000..ca8664b --- /dev/null +++ b/tests/xfs/1304 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1304 +# +# Populate a XFS filesystem and fuzz every AGI field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz AGI" +_scratch_xfs_fuzz_metadata '' 'offline' 'agi 0' >> $seqres.full +echo "Done fuzzing AGI" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1304.out b/tests/xfs/1304.out new file mode 100644 index 0000000..886157b --- /dev/null +++ b/tests/xfs/1304.out @@ -0,0 +1,4 @@ +QA output created by 1304 +Format and populate +Fuzz AGI +Done fuzzing AGI diff --git a/tests/xfs/1305 b/tests/xfs/1305 new file mode 100755 index 0000000..fa36f03 --- /dev/null +++ b/tests/xfs/1305 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1305 +# +# Populate a XFS filesystem and fuzz every bnobt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz bnobt recs" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr bnoroot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing bnobt recs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1305.out b/tests/xfs/1305.out new file mode 100644 index 0000000..b2108f1 --- /dev/null +++ b/tests/xfs/1305.out @@ -0,0 +1,4 @@ +QA output created by 1305 +Format and populate +Fuzz bnobt recs +Done fuzzing bnobt recs diff --git a/tests/xfs/1306 b/tests/xfs/1306 new file mode 100755 index 0000000..76cbf57 --- /dev/null +++ b/tests/xfs/1306 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1306 +# +# Populate a XFS filesystem and fuzz every bnobt key/pointer. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz bnobt keyptr" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr bnoroot' >> $seqres.full +echo "Done fuzzing bnobt keyptr" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1306.out b/tests/xfs/1306.out new file mode 100644 index 0000000..4b1e0c6 --- /dev/null +++ b/tests/xfs/1306.out @@ -0,0 +1,4 @@ +QA output created by 1306 +Format and populate +Fuzz bnobt keyptr +Done fuzzing bnobt keyptr diff --git a/tests/xfs/1307 b/tests/xfs/1307 new file mode 100755 index 0000000..82608dd --- /dev/null +++ b/tests/xfs/1307 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1307 +# +# Populate a XFS filesystem and fuzz every cntbt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz cntbt" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr cntroot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing cntbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1307.out b/tests/xfs/1307.out new file mode 100644 index 0000000..a7cedf1 --- /dev/null +++ b/tests/xfs/1307.out @@ -0,0 +1,4 @@ +QA output created by 1307 +Format and populate +Fuzz cntbt +Done fuzzing cntbt diff --git a/tests/xfs/1308 b/tests/xfs/1308 new file mode 100755 index 0000000..147fbeb --- /dev/null +++ b/tests/xfs/1308 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1308 +# +# Populate a XFS filesystem and fuzz every inobt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz inobt" +_scratch_xfs_fuzz_metadata '' 'offline' 'agi 0' 'addr root' >> $seqres.full +echo "Done fuzzing inobt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1308.out b/tests/xfs/1308.out new file mode 100644 index 0000000..cc72bb7 --- /dev/null +++ b/tests/xfs/1308.out @@ -0,0 +1,4 @@ +QA output created by 1308 +Format and populate +Fuzz inobt +Done fuzzing inobt diff --git a/tests/xfs/1309 b/tests/xfs/1309 new file mode 100755 index 0000000..be33be7 --- /dev/null +++ b/tests/xfs/1309 @@ -0,0 +1,61 @@ +#! /bin/bash +# FS QA Test No. 1309 +# +# Populate a XFS filesystem and fuzz every finobt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_xfs_finobt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz finobt" +_scratch_xfs_fuzz_metadata '' 'offline' 'agi 0' 'addr free_root' >> $seqres.full +echo "Done fuzzing finobt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1309.out b/tests/xfs/1309.out new file mode 100644 index 0000000..b4084ef --- /dev/null +++ b/tests/xfs/1309.out @@ -0,0 +1,4 @@ +QA output created by 1309 +Format and populate +Fuzz finobt +Done fuzzing finobt diff --git a/tests/xfs/1310 b/tests/xfs/1310 new file mode 100755 index 0000000..695bd2a --- /dev/null +++ b/tests/xfs/1310 @@ -0,0 +1,61 @@ +#! /bin/bash +# FS QA Test No. 1310 +# +# Populate a XFS filesystem and fuzz every rmapbt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz rmapbt recs" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr rmaproot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing rmapbt recs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1310.out b/tests/xfs/1310.out new file mode 100644 index 0000000..e784f8b --- /dev/null +++ b/tests/xfs/1310.out @@ -0,0 +1,4 @@ +QA output created by 1310 +Format and populate +Fuzz rmapbt recs +Done fuzzing rmapbt recs diff --git a/tests/xfs/1311 b/tests/xfs/1311 new file mode 100755 index 0000000..7415dee --- /dev/null +++ b/tests/xfs/1311 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1311 +# +# Populate a XFS filesystem and fuzz every rmapbt key/pointer field. +# Use xfs_repair to fix the corruption. +# Use xfs_repair to repair the problems. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz rmapbt keyptr" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr rmaproot' >> $seqres.full +echo "Done fuzzing rmapbt keyptr" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1311.out b/tests/xfs/1311.out new file mode 100644 index 0000000..70150a1 --- /dev/null +++ b/tests/xfs/1311.out @@ -0,0 +1,4 @@ +QA output created by 1311 +Format and populate +Fuzz rmapbt keyptr +Done fuzzing rmapbt keyptr diff --git a/tests/xfs/1312 b/tests/xfs/1312 new file mode 100755 index 0000000..8665de0 --- /dev/null +++ b/tests/xfs/1312 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1312 +# +# Populate a XFS filesystem and fuzz every refcountbt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy +. ./common/reflink + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_reflink +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz refcountbt" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr refcntroot' >> $seqres.full +echo "Done fuzzing refcountbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1312.out b/tests/xfs/1312.out new file mode 100644 index 0000000..ca40b46 --- /dev/null +++ b/tests/xfs/1312.out @@ -0,0 +1,4 @@ +QA output created by 1312 +Format and populate +Fuzz refcountbt +Done fuzzing refcountbt diff --git a/tests/xfs/1313 b/tests/xfs/1313 new file mode 100755 index 0000000..daad56b --- /dev/null +++ b/tests/xfs/1313 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1313 +# +# Populate a XFS filesystem and fuzz every btree-format directory inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find btree-format dir inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_BTREE) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1313.out b/tests/xfs/1313.out new file mode 100644 index 0000000..b087a06 --- /dev/null +++ b/tests/xfs/1313.out @@ -0,0 +1,5 @@ +QA output created by 1313 +Format and populate +Find btree-format dir inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1314 b/tests/xfs/1314 new file mode 100755 index 0000000..d045239 --- /dev/null +++ b/tests/xfs/1314 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1314 +# +# Populate a XFS filesystem and fuzz every extents-format file inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find extents-format file inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFREG.FMT_EXTENTS) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1314.out b/tests/xfs/1314.out new file mode 100644 index 0000000..c5c1a3a --- /dev/null +++ b/tests/xfs/1314.out @@ -0,0 +1,5 @@ +QA output created by 1314 +Format and populate +Find extents-format file inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1315 b/tests/xfs/1315 new file mode 100755 index 0000000..ed5601e --- /dev/null +++ b/tests/xfs/1315 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1315 +# +# Populate a XFS filesystem and fuzz every btree-format file inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find btree-format file inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFREG.FMT_BTREE) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1315.out b/tests/xfs/1315.out new file mode 100644 index 0000000..421b645 --- /dev/null +++ b/tests/xfs/1315.out @@ -0,0 +1,5 @@ +QA output created by 1315 +Format and populate +Find btree-format file inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1316 b/tests/xfs/1316 new file mode 100755 index 0000000..053c4f7 --- /dev/null +++ b/tests/xfs/1316 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1316 +# +# Populate a XFS filesystem and fuzz every bmbt block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find bmbt block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFREG.FMT_BTREE) +_scratch_unmount + +inode_ver=$(_scratch_xfs_get_metadata_field "core.version" "inode ${inum}") + +echo "Fuzz bmbt" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "addr u${inode_ver}.bmbt.ptrs[1]" >> $seqres.full +echo "Done fuzzing bmbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1316.out b/tests/xfs/1316.out new file mode 100644 index 0000000..1ae75f6 --- /dev/null +++ b/tests/xfs/1316.out @@ -0,0 +1,5 @@ +QA output created by 1316 +Format and populate +Find bmbt block +Fuzz bmbt +Done fuzzing bmbt diff --git a/tests/xfs/1317 b/tests/xfs/1317 new file mode 100755 index 0000000..0a96114 --- /dev/null +++ b/tests/xfs/1317 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1317 +# +# Populate a XFS filesystem and fuzz every symlink remote block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find symlink remote block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFLNK.FMT_EXTENTS) +_scratch_unmount + +echo "Fuzz symlink remote block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" 'dblock 0' >> $seqres.full +echo "Done fuzzing symlink remote block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1317.out b/tests/xfs/1317.out new file mode 100644 index 0000000..92affb2 --- /dev/null +++ b/tests/xfs/1317.out @@ -0,0 +1,5 @@ +QA output created by 1317 +Format and populate +Find symlink remote block +Fuzz symlink remote block +Done fuzzing symlink remote block diff --git a/tests/xfs/1318 b/tests/xfs/1318 new file mode 100755 index 0000000..583c60b --- /dev/null +++ b/tests/xfs/1318 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1318 +# +# Populate a XFS filesystem and fuzz every inline directory inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find inline-format dir inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_INLINE) +_scratch_unmount + +echo "Fuzz inline-format dir inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inline-format dir inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1318.out b/tests/xfs/1318.out new file mode 100644 index 0000000..c12e336 --- /dev/null +++ b/tests/xfs/1318.out @@ -0,0 +1,5 @@ +QA output created by 1318 +Format and populate +Find inline-format dir inode +Fuzz inline-format dir inode +Done fuzzing inline-format dir inode diff --git a/tests/xfs/1319 b/tests/xfs/1319 new file mode 100755 index 0000000..de6df22 --- /dev/null +++ b/tests/xfs/1319 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1319 +# +# Populate a XFS filesystem and fuzz every block-format dir block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find data-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_BLOCK) +_scratch_unmount + +echo "Fuzz data-format dir block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" 'dblock 0' >> $seqres.full +echo "Done fuzzing data-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1319.out b/tests/xfs/1319.out new file mode 100644 index 0000000..72ab82a --- /dev/null +++ b/tests/xfs/1319.out @@ -0,0 +1,5 @@ +QA output created by 1319 +Format and populate +Find data-format dir block +Fuzz data-format dir block +Done fuzzing data-format dir block diff --git a/tests/xfs/1320 b/tests/xfs/1320 new file mode 100755 index 0000000..257b768 --- /dev/null +++ b/tests/xfs/1320 @@ -0,0 +1,66 @@ +#! /bin/bash +# FS QA Test No. 1320 +# +# Populate a XFS filesystem and fuzz every data-format dir block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find data-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_LEAF) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +echo "Fuzz data-format dir block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "dblock 0" >> $seqres.full +echo "Done fuzzing data-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1320.out b/tests/xfs/1320.out new file mode 100644 index 0000000..409a25b --- /dev/null +++ b/tests/xfs/1320.out @@ -0,0 +1,5 @@ +QA output created by 1320 +Format and populate +Find data-format dir block +Fuzz data-format dir block +Done fuzzing data-format dir block diff --git a/tests/xfs/1321 b/tests/xfs/1321 new file mode 100755 index 0000000..3e6e170 --- /dev/null +++ b/tests/xfs/1321 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1321 +# +# Populate a XFS filesystem and fuzz every leaf1-format dir block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find leaf1-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_LEAF) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( (2 ** 35) / blk_sz)) +echo "Fuzz leaf1-format dir block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing leaf1-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1321.out b/tests/xfs/1321.out new file mode 100644 index 0000000..ef3fa37 --- /dev/null +++ b/tests/xfs/1321.out @@ -0,0 +1,5 @@ +QA output created by 1321 +Format and populate +Find leaf1-format dir block +Fuzz leaf1-format dir block +Done fuzzing leaf1-format dir block diff --git a/tests/xfs/1322 b/tests/xfs/1322 new file mode 100755 index 0000000..90eb79d --- /dev/null +++ b/tests/xfs/1322 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1322 +# +# Populate a XFS filesystem and fuzz every leafn-format dir block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find leafn-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_NODE) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( ( (2 ** 35) / blk_sz) + 1)) +echo "Fuzz leafn-format dir block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing leafn-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1322.out b/tests/xfs/1322.out new file mode 100644 index 0000000..d1e0c7d --- /dev/null +++ b/tests/xfs/1322.out @@ -0,0 +1,5 @@ +QA output created by 1322 +Format and populate +Find leafn-format dir block +Fuzz leafn-format dir block +Done fuzzing leafn-format dir block diff --git a/tests/xfs/1323 b/tests/xfs/1323 new file mode 100755 index 0000000..0efd6bc --- /dev/null +++ b/tests/xfs/1323 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1323 +# +# Populate a XFS filesystem and fuzz every node-format dir block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find node-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_NODE) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( (2 ** 35) / blk_sz )) +echo "Fuzz node-format dir block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing node-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1323.out b/tests/xfs/1323.out new file mode 100644 index 0000000..2debc5c --- /dev/null +++ b/tests/xfs/1323.out @@ -0,0 +1,5 @@ +QA output created by 1323 +Format and populate +Find node-format dir block +Fuzz node-format dir block +Done fuzzing node-format dir block diff --git a/tests/xfs/1324 b/tests/xfs/1324 new file mode 100755 index 0000000..015861c --- /dev/null +++ b/tests/xfs/1324 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1324 +# +# Populate a XFS filesystem and fuzz every freeindex-format dir block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find freeindex-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_NODE) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( (2 ** 36) / blk_sz )) +echo "Fuzz freeindex-format dir block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing freeindex-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1324.out b/tests/xfs/1324.out new file mode 100644 index 0000000..1e373e0 --- /dev/null +++ b/tests/xfs/1324.out @@ -0,0 +1,5 @@ +QA output created by 1324 +Format and populate +Find freeindex-format dir block +Fuzz freeindex-format dir block +Done fuzzing freeindex-format dir block diff --git a/tests/xfs/1325 b/tests/xfs/1325 new file mode 100755 index 0000000..11fb7bd --- /dev/null +++ b/tests/xfs/1325 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1325 +# +# Populate a XFS filesystem and fuzz every inline attr inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find inline-format attr inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_LOCAL) +_scratch_unmount + +echo "Fuzz inline-format attr inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inline-format attr inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1325.out b/tests/xfs/1325.out new file mode 100644 index 0000000..5259fe8 --- /dev/null +++ b/tests/xfs/1325.out @@ -0,0 +1,5 @@ +QA output created by 1325 +Format and populate +Find inline-format attr inode +Fuzz inline-format attr inode +Done fuzzing inline-format attr inode diff --git a/tests/xfs/1326 b/tests/xfs/1326 new file mode 100755 index 0000000..0e9e84f --- /dev/null +++ b/tests/xfs/1326 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1326 +# +# Populate a XFS filesystem and fuzz every leaf-format attr block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find leaf-format attr block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_LEAF) +_scratch_unmount + +echo "Fuzz leaf-format attr block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" 'ablock 0' >> $seqres.full +echo "Done fuzzing leaf-format attr block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1326.out b/tests/xfs/1326.out new file mode 100644 index 0000000..d10cdb7 --- /dev/null +++ b/tests/xfs/1326.out @@ -0,0 +1,5 @@ +QA output created by 1326 +Format and populate +Find leaf-format attr block +Fuzz leaf-format attr block +Done fuzzing leaf-format attr block diff --git a/tests/xfs/1327 b/tests/xfs/1327 new file mode 100755 index 0000000..7cd9b81 --- /dev/null +++ b/tests/xfs/1327 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1327 +# +# Populate a XFS filesystem and fuzz every node-format attr block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find node-format attr block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_NODE) +_scratch_unmount + +echo "Fuzz node-format attr block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "ablock 0" >> $seqres.full +echo "Done fuzzing node-format attr block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1327.out b/tests/xfs/1327.out new file mode 100644 index 0000000..b3a4f1d --- /dev/null +++ b/tests/xfs/1327.out @@ -0,0 +1,5 @@ +QA output created by 1327 +Format and populate +Find node-format attr block +Fuzz node-format attr block +Done fuzzing node-format attr block diff --git a/tests/xfs/1328 b/tests/xfs/1328 new file mode 100755 index 0000000..06dbe10 --- /dev/null +++ b/tests/xfs/1328 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1328 +# +# Populate a XFS filesystem and fuzz every external attr block field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find external attr block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_EXTENTS_REMOTE3K) +_scratch_unmount + +echo "Fuzz external attr block" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" "ablock 1" >> $seqres.full +echo "Done fuzzing external attr block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1328.out b/tests/xfs/1328.out new file mode 100644 index 0000000..758f322 --- /dev/null +++ b/tests/xfs/1328.out @@ -0,0 +1,5 @@ +QA output created by 1328 +Format and populate +Find external attr block +Fuzz external attr block +Done fuzzing external attr block diff --git a/tests/xfs/1329 b/tests/xfs/1329 new file mode 100755 index 0000000..324c8f1 --- /dev/null +++ b/tests/xfs/1329 @@ -0,0 +1,64 @@ +#! /bin/bash +# FS QA Test No. 1329 +# +# Populate a XFS filesystem and fuzz every rtrmapbt record field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_realtime +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +inode_ver=$(_scratch_xfs_get_metadata_field "core.version" 'sb 0' 'addr rrmapino') + +echo "Fuzz rtrmapbt recs" +_scratch_xfs_fuzz_metadata '' 'offline' 'sb 0' 'addr rrmapino' "addr u${inode_ver}.rtrmapbt.ptrs[1]" >> $seqres.full +echo "Done fuzzing rtrmapbt recs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1329.out b/tests/xfs/1329.out new file mode 100644 index 0000000..d9d8b89 --- /dev/null +++ b/tests/xfs/1329.out @@ -0,0 +1,4 @@ +QA output created by 1329 +Format and populate +Fuzz rtrmapbt recs +Done fuzzing rtrmapbt recs diff --git a/tests/xfs/1330 b/tests/xfs/1330 new file mode 100755 index 0000000..926b788 --- /dev/null +++ b/tests/xfs/1330 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1330 +# +# Populate a XFS filesystem and fuzz every rtrmapbt keyptr field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_realtime +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz rtrmapbt keyptrs" +_scratch_xfs_fuzz_metadata '(rtrmapbt)' 'offline' 'sb 0' 'addr rrmapino' >> $seqres.full +echo "Done fuzzing rtrmapbt keyptrs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1330.out b/tests/xfs/1330.out new file mode 100644 index 0000000..ce16b43 --- /dev/null +++ b/tests/xfs/1330.out @@ -0,0 +1,4 @@ +QA output created by 1330 +Format and populate +Fuzz rtrmapbt keyptrs +Done fuzzing rtrmapbt keyptrs diff --git a/tests/xfs/1331 b/tests/xfs/1331 new file mode 100755 index 0000000..d087683 --- /dev/null +++ b/tests/xfs/1331 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1331 +# +# Populate a XFS filesystem and fuzz every refcountbt field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy +. ./common/reflink + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_reflink +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz refcountbt" +_scratch_xfs_fuzz_metadata '' 'offline' 'agf 0' 'addr refcntroot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing refcountbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1331.out b/tests/xfs/1331.out new file mode 100644 index 0000000..8dbbf16 --- /dev/null +++ b/tests/xfs/1331.out @@ -0,0 +1,4 @@ +QA output created by 1331 +Format and populate +Fuzz refcountbt +Done fuzzing refcountbt diff --git a/tests/xfs/1332 b/tests/xfs/1332 new file mode 100755 index 0000000..0f7b928 --- /dev/null +++ b/tests/xfs/1332 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1332 +# +# Populate a XFS filesystem and fuzz every btree-format attr inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find btree-format attr inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_BTREE) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1332.out b/tests/xfs/1332.out new file mode 100644 index 0000000..34feb40 --- /dev/null +++ b/tests/xfs/1332.out @@ -0,0 +1,5 @@ +QA output created by 1332 +Format and populate +Find btree-format attr inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1333 b/tests/xfs/1333 new file mode 100755 index 0000000..14adfcb --- /dev/null +++ b/tests/xfs/1333 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1333 +# +# Populate a XFS filesystem and fuzz every blockdev inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find blockdev inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFBLK) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1333.out b/tests/xfs/1333.out new file mode 100644 index 0000000..168dd52 --- /dev/null +++ b/tests/xfs/1333.out @@ -0,0 +1,5 @@ +QA output created by 1333 +Format and populate +Find blockdev inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1334 b/tests/xfs/1334 new file mode 100755 index 0000000..72a42b3 --- /dev/null +++ b/tests/xfs/1334 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1334 +# +# Populate a XFS filesystem and fuzz every local-format symlink inode field. +# Use xfs_repair to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find local-format symlink inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFLNK.FMT_LOCAL) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'offline' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1334.out b/tests/xfs/1334.out new file mode 100644 index 0000000..c5512e0 --- /dev/null +++ b/tests/xfs/1334.out @@ -0,0 +1,5 @@ +QA output created by 1334 +Format and populate +Find local-format symlink inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1341 b/tests/xfs/1341 new file mode 100755 index 0000000..d75bf55 --- /dev/null +++ b/tests/xfs/1341 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1341 +# +# Populate a XFS filesystem and fuzz every superblock field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz superblock" +_scratch_xfs_fuzz_metadata '' 'online' 'sb 1' >> $seqres.full +echo "Done fuzzing superblock" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1341.out b/tests/xfs/1341.out new file mode 100644 index 0000000..e1fb358 --- /dev/null +++ b/tests/xfs/1341.out @@ -0,0 +1,4 @@ +QA output created by 1341 +Format and populate +Fuzz superblock +Done fuzzing superblock diff --git a/tests/xfs/1342 b/tests/xfs/1342 new file mode 100755 index 0000000..6b9db02 --- /dev/null +++ b/tests/xfs/1342 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1342 +# +# Populate a XFS filesystem and fuzz every AGF field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1302 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz AGF" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' >> $seqres.full +echo "Done fuzzing AGF" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1342.out b/tests/xfs/1342.out new file mode 100644 index 0000000..216cad2 --- /dev/null +++ b/tests/xfs/1342.out @@ -0,0 +1,4 @@ +QA output created by 1342 +Format and populate +Fuzz AGF +Done fuzzing AGF diff --git a/tests/xfs/1343 b/tests/xfs/1343 new file mode 100755 index 0000000..82c18ec --- /dev/null +++ b/tests/xfs/1343 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1343 +# +# Populate a XFS filesystem and fuzz every AGFL field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz AGFL" +_scratch_xfs_fuzz_metadata '' 'online' 'agfl 0' >> $seqres.full +echo "Done fuzzing AGFL" + +echo "Fuzz AGFL flfirst" +flfirst=$(_scratch_xfs_db -c 'agf 0' -c 'p flfirst' | sed -e 's/flfirst = //g') +SCRATCH_XFS_LIST_METADATA_FIELDS="bno[${flfirst}]" _scratch_xfs_fuzz_metadata '' 'online' 'agfl 0' >> $seqres.full +echo "Done fuzzing AGFL flfirst" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1343.out b/tests/xfs/1343.out new file mode 100644 index 0000000..444ec17 --- /dev/null +++ b/tests/xfs/1343.out @@ -0,0 +1,6 @@ +QA output created by 1343 +Format and populate +Fuzz AGFL +Done fuzzing AGFL +Fuzz AGFL flfirst +Done fuzzing AGFL flfirst diff --git a/tests/xfs/1344 b/tests/xfs/1344 new file mode 100755 index 0000000..9465e8c --- /dev/null +++ b/tests/xfs/1344 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1344 +# +# Populate a XFS filesystem and fuzz every AGI field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz AGI" +_scratch_xfs_fuzz_metadata '' 'online' 'agi 0' >> $seqres.full +echo "Done fuzzing AGI" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1344.out b/tests/xfs/1344.out new file mode 100644 index 0000000..f70956e --- /dev/null +++ b/tests/xfs/1344.out @@ -0,0 +1,4 @@ +QA output created by 1344 +Format and populate +Fuzz AGI +Done fuzzing AGI diff --git a/tests/xfs/1345 b/tests/xfs/1345 new file mode 100755 index 0000000..b991bed --- /dev/null +++ b/tests/xfs/1345 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1345 +# +# Populate a XFS filesystem and fuzz every bnobt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz bnobt recs" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr bnoroot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing bnobt recs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1345.out b/tests/xfs/1345.out new file mode 100644 index 0000000..c3b878c --- /dev/null +++ b/tests/xfs/1345.out @@ -0,0 +1,4 @@ +QA output created by 1345 +Format and populate +Fuzz bnobt recs +Done fuzzing bnobt recs diff --git a/tests/xfs/1346 b/tests/xfs/1346 new file mode 100755 index 0000000..2a0bc07 --- /dev/null +++ b/tests/xfs/1346 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1346 +# +# Populate a XFS filesystem and fuzz every bnobt key/pointer. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz bnobt keyptr" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr bnoroot' >> $seqres.full +echo "Done fuzzing bnobt keyptr" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1346.out b/tests/xfs/1346.out new file mode 100644 index 0000000..9b96ddf --- /dev/null +++ b/tests/xfs/1346.out @@ -0,0 +1,4 @@ +QA output created by 1346 +Format and populate +Fuzz bnobt keyptr +Done fuzzing bnobt keyptr diff --git a/tests/xfs/1347 b/tests/xfs/1347 new file mode 100755 index 0000000..b443bc1 --- /dev/null +++ b/tests/xfs/1347 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1347 +# +# Populate a XFS filesystem and fuzz every cntbt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz cntbt" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr cntroot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing cntbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1347.out b/tests/xfs/1347.out new file mode 100644 index 0000000..5033fa6 --- /dev/null +++ b/tests/xfs/1347.out @@ -0,0 +1,4 @@ +QA output created by 1347 +Format and populate +Fuzz cntbt +Done fuzzing cntbt diff --git a/tests/xfs/1348 b/tests/xfs/1348 new file mode 100755 index 0000000..7c0ff96 --- /dev/null +++ b/tests/xfs/1348 @@ -0,0 +1,60 @@ +#! /bin/bash +# FS QA Test No. 1348 +# +# Populate a XFS filesystem and fuzz every inobt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz inobt" +_scratch_xfs_fuzz_metadata '' 'online' 'agi 0' 'addr root' >> $seqres.full +echo "Done fuzzing inobt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1348.out b/tests/xfs/1348.out new file mode 100644 index 0000000..20ad257 --- /dev/null +++ b/tests/xfs/1348.out @@ -0,0 +1,4 @@ +QA output created by 1348 +Format and populate +Fuzz inobt +Done fuzzing inobt diff --git a/tests/xfs/1349 b/tests/xfs/1349 new file mode 100755 index 0000000..11f5915 --- /dev/null +++ b/tests/xfs/1349 @@ -0,0 +1,61 @@ +#! /bin/bash +# FS QA Test No. 1349 +# +# Populate a XFS filesystem and fuzz every finobt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_xfs_finobt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz finobt" +_scratch_xfs_fuzz_metadata '' 'online' 'agi 0' 'addr free_root' >> $seqres.full +echo "Done fuzzing finobt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1349.out b/tests/xfs/1349.out new file mode 100644 index 0000000..addb6b4 --- /dev/null +++ b/tests/xfs/1349.out @@ -0,0 +1,4 @@ +QA output created by 1349 +Format and populate +Fuzz finobt +Done fuzzing finobt diff --git a/tests/xfs/1350 b/tests/xfs/1350 new file mode 100755 index 0000000..1fb1bb3 --- /dev/null +++ b/tests/xfs/1350 @@ -0,0 +1,61 @@ +#! /bin/bash +# FS QA Test No. 1350 +# +# Populate a XFS filesystem and fuzz every rmapbt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz rmapbt recs" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr rmaproot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing rmapbt recs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1350.out b/tests/xfs/1350.out new file mode 100644 index 0000000..fc636fe --- /dev/null +++ b/tests/xfs/1350.out @@ -0,0 +1,4 @@ +QA output created by 1350 +Format and populate +Fuzz rmapbt recs +Done fuzzing rmapbt recs diff --git a/tests/xfs/1351 b/tests/xfs/1351 new file mode 100755 index 0000000..63a878c --- /dev/null +++ b/tests/xfs/1351 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1351 +# +# Populate a XFS filesystem and fuzz every rmapbt key/pointer field. +# Use xfs_scrub to fix the corruption. +# Use xfs_scrub to repair the problems. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz rmapbt keyptr" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr rmaproot' >> $seqres.full +echo "Done fuzzing rmapbt keyptr" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1351.out b/tests/xfs/1351.out new file mode 100644 index 0000000..034c31c --- /dev/null +++ b/tests/xfs/1351.out @@ -0,0 +1,4 @@ +QA output created by 1351 +Format and populate +Fuzz rmapbt keyptr +Done fuzzing rmapbt keyptr diff --git a/tests/xfs/1352 b/tests/xfs/1352 new file mode 100755 index 0000000..8f1d12e --- /dev/null +++ b/tests/xfs/1352 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1352 +# +# Populate a XFS filesystem and fuzz every refcountbt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy +. ./common/reflink + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_reflink +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz refcountbt" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr refcntroot' >> $seqres.full +echo "Done fuzzing refcountbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1352.out b/tests/xfs/1352.out new file mode 100644 index 0000000..def6d29 --- /dev/null +++ b/tests/xfs/1352.out @@ -0,0 +1,4 @@ +QA output created by 1352 +Format and populate +Fuzz refcountbt +Done fuzzing refcountbt diff --git a/tests/xfs/1353 b/tests/xfs/1353 new file mode 100755 index 0000000..6679456 --- /dev/null +++ b/tests/xfs/1353 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1353 +# +# Populate a XFS filesystem and fuzz every btree-format directory inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find btree-format dir inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_BTREE) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1353.out b/tests/xfs/1353.out new file mode 100644 index 0000000..3780bd0 --- /dev/null +++ b/tests/xfs/1353.out @@ -0,0 +1,5 @@ +QA output created by 1353 +Format and populate +Find btree-format dir inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1354 b/tests/xfs/1354 new file mode 100755 index 0000000..b122941 --- /dev/null +++ b/tests/xfs/1354 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1354 +# +# Populate a XFS filesystem and fuzz every extents-format file inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find extents-format file inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFREG.FMT_EXTENTS) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1354.out b/tests/xfs/1354.out new file mode 100644 index 0000000..afb934a --- /dev/null +++ b/tests/xfs/1354.out @@ -0,0 +1,5 @@ +QA output created by 1354 +Format and populate +Find extents-format file inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1355 b/tests/xfs/1355 new file mode 100755 index 0000000..b5b54a3 --- /dev/null +++ b/tests/xfs/1355 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1355 +# +# Populate a XFS filesystem and fuzz every btree-format file inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find btree-format file inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFREG.FMT_BTREE) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1355.out b/tests/xfs/1355.out new file mode 100644 index 0000000..63465b5 --- /dev/null +++ b/tests/xfs/1355.out @@ -0,0 +1,5 @@ +QA output created by 1355 +Format and populate +Find btree-format file inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1356 b/tests/xfs/1356 new file mode 100755 index 0000000..b198b70 --- /dev/null +++ b/tests/xfs/1356 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1356 +# +# Populate a XFS filesystem and fuzz every bmbt block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find bmbt block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFREG.FMT_BTREE) +_scratch_unmount + +inode_ver=$(_scratch_xfs_get_metadata_field "core.version" "inode ${inum}") + +echo "Fuzz bmbt" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "addr u${inode_ver}.bmbt.ptrs[1]" >> $seqres.full +echo "Done fuzzing bmbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1356.out b/tests/xfs/1356.out new file mode 100644 index 0000000..22d79bb --- /dev/null +++ b/tests/xfs/1356.out @@ -0,0 +1,5 @@ +QA output created by 1356 +Format and populate +Find bmbt block +Fuzz bmbt +Done fuzzing bmbt diff --git a/tests/xfs/1357 b/tests/xfs/1357 new file mode 100755 index 0000000..232f48b --- /dev/null +++ b/tests/xfs/1357 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1357 +# +# Populate a XFS filesystem and fuzz every symlink remote block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find symlink remote block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFLNK.FMT_EXTENTS) +_scratch_unmount + +echo "Fuzz symlink remote block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" 'dblock 0' >> $seqres.full +echo "Done fuzzing symlink remote block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1357.out b/tests/xfs/1357.out new file mode 100644 index 0000000..83b428b --- /dev/null +++ b/tests/xfs/1357.out @@ -0,0 +1,5 @@ +QA output created by 1357 +Format and populate +Find symlink remote block +Fuzz symlink remote block +Done fuzzing symlink remote block diff --git a/tests/xfs/1358 b/tests/xfs/1358 new file mode 100755 index 0000000..dedf07b --- /dev/null +++ b/tests/xfs/1358 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1358 +# +# Populate a XFS filesystem and fuzz every inline directory inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find inline-format dir inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_INLINE) +_scratch_unmount + +echo "Fuzz inline-format dir inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inline-format dir inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1358.out b/tests/xfs/1358.out new file mode 100644 index 0000000..7d18d45 --- /dev/null +++ b/tests/xfs/1358.out @@ -0,0 +1,5 @@ +QA output created by 1358 +Format and populate +Find inline-format dir inode +Fuzz inline-format dir inode +Done fuzzing inline-format dir inode diff --git a/tests/xfs/1359 b/tests/xfs/1359 new file mode 100755 index 0000000..fdc1b13 --- /dev/null +++ b/tests/xfs/1359 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1359 +# +# Populate a XFS filesystem and fuzz every block-format dir block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find data-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_BLOCK) +_scratch_unmount + +echo "Fuzz data-format dir block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" 'dblock 0' >> $seqres.full +echo "Done fuzzing data-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1359.out b/tests/xfs/1359.out new file mode 100644 index 0000000..9a70632 --- /dev/null +++ b/tests/xfs/1359.out @@ -0,0 +1,5 @@ +QA output created by 1359 +Format and populate +Find data-format dir block +Fuzz data-format dir block +Done fuzzing data-format dir block diff --git a/tests/xfs/1360 b/tests/xfs/1360 new file mode 100755 index 0000000..4b30f0d --- /dev/null +++ b/tests/xfs/1360 @@ -0,0 +1,66 @@ +#! /bin/bash +# FS QA Test No. 1360 +# +# Populate a XFS filesystem and fuzz every data-format dir block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find data-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_LEAF) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +echo "Fuzz data-format dir block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "dblock 0" >> $seqres.full +echo "Done fuzzing data-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1360.out b/tests/xfs/1360.out new file mode 100644 index 0000000..9ce6a67 --- /dev/null +++ b/tests/xfs/1360.out @@ -0,0 +1,5 @@ +QA output created by 1360 +Format and populate +Find data-format dir block +Fuzz data-format dir block +Done fuzzing data-format dir block diff --git a/tests/xfs/1361 b/tests/xfs/1361 new file mode 100755 index 0000000..b5887d9 --- /dev/null +++ b/tests/xfs/1361 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1361 +# +# Populate a XFS filesystem and fuzz every leaf1-format dir block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find leaf1-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_LEAF) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( (2 ** 35) / blk_sz)) +echo "Fuzz leaf1-format dir block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing leaf1-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1361.out b/tests/xfs/1361.out new file mode 100644 index 0000000..251a100 --- /dev/null +++ b/tests/xfs/1361.out @@ -0,0 +1,5 @@ +QA output created by 1361 +Format and populate +Find leaf1-format dir block +Fuzz leaf1-format dir block +Done fuzzing leaf1-format dir block diff --git a/tests/xfs/1362 b/tests/xfs/1362 new file mode 100755 index 0000000..a8716cc --- /dev/null +++ b/tests/xfs/1362 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1362 +# +# Populate a XFS filesystem and fuzz every leafn-format dir block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find leafn-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_NODE) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( ( (2 ** 35) / blk_sz) + 1)) +echo "Fuzz leafn-format dir block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing leafn-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1362.out b/tests/xfs/1362.out new file mode 100644 index 0000000..d6694b3 --- /dev/null +++ b/tests/xfs/1362.out @@ -0,0 +1,5 @@ +QA output created by 1362 +Format and populate +Find leafn-format dir block +Fuzz leafn-format dir block +Done fuzzing leafn-format dir block diff --git a/tests/xfs/1363 b/tests/xfs/1363 new file mode 100755 index 0000000..d63c7b4 --- /dev/null +++ b/tests/xfs/1363 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1363 +# +# Populate a XFS filesystem and fuzz every node-format dir block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find node-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_NODE) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( (2 ** 35) / blk_sz )) +echo "Fuzz node-format dir block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing node-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1363.out b/tests/xfs/1363.out new file mode 100644 index 0000000..c5d8fd6 --- /dev/null +++ b/tests/xfs/1363.out @@ -0,0 +1,5 @@ +QA output created by 1363 +Format and populate +Find node-format dir block +Fuzz node-format dir block +Done fuzzing node-format dir block diff --git a/tests/xfs/1364 b/tests/xfs/1364 new file mode 100755 index 0000000..a2fab10 --- /dev/null +++ b/tests/xfs/1364 @@ -0,0 +1,67 @@ +#! /bin/bash +# FS QA Test No. 1364 +# +# Populate a XFS filesystem and fuzz every freeindex-format dir block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find freeindex-format dir block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFDIR.FMT_NODE) +blk_sz=$(_get_block_size $SCRATCH_MNT) +_scratch_unmount + +leaf_offset=$(( (2 ** 36) / blk_sz )) +echo "Fuzz freeindex-format dir block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "dblock ${leaf_offset}" >> $seqres.full +echo "Done fuzzing freeindex-format dir block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1364.out b/tests/xfs/1364.out new file mode 100644 index 0000000..f85d52e --- /dev/null +++ b/tests/xfs/1364.out @@ -0,0 +1,5 @@ +QA output created by 1364 +Format and populate +Find freeindex-format dir block +Fuzz freeindex-format dir block +Done fuzzing freeindex-format dir block diff --git a/tests/xfs/1365 b/tests/xfs/1365 new file mode 100755 index 0000000..8af6e21 --- /dev/null +++ b/tests/xfs/1365 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1365 +# +# Populate a XFS filesystem and fuzz every inline attr inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find inline-format attr inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_LOCAL) +_scratch_unmount + +echo "Fuzz inline-format attr inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inline-format attr inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1365.out b/tests/xfs/1365.out new file mode 100644 index 0000000..e9a62d5 --- /dev/null +++ b/tests/xfs/1365.out @@ -0,0 +1,5 @@ +QA output created by 1365 +Format and populate +Find inline-format attr inode +Fuzz inline-format attr inode +Done fuzzing inline-format attr inode diff --git a/tests/xfs/1366 b/tests/xfs/1366 new file mode 100755 index 0000000..5259497 --- /dev/null +++ b/tests/xfs/1366 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1366 +# +# Populate a XFS filesystem and fuzz every leaf-format attr block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find leaf-format attr block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_LEAF) +_scratch_unmount + +echo "Fuzz leaf-format attr block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" 'ablock 0' >> $seqres.full +echo "Done fuzzing leaf-format attr block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1366.out b/tests/xfs/1366.out new file mode 100644 index 0000000..5a45bab --- /dev/null +++ b/tests/xfs/1366.out @@ -0,0 +1,5 @@ +QA output created by 1366 +Format and populate +Find leaf-format attr block +Fuzz leaf-format attr block +Done fuzzing leaf-format attr block diff --git a/tests/xfs/1367 b/tests/xfs/1367 new file mode 100755 index 0000000..d0c6ea6 --- /dev/null +++ b/tests/xfs/1367 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1367 +# +# Populate a XFS filesystem and fuzz every node-format attr block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find node-format attr block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_NODE) +_scratch_unmount + +echo "Fuzz node-format attr block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "ablock 0" >> $seqres.full +echo "Done fuzzing node-format attr block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1367.out b/tests/xfs/1367.out new file mode 100644 index 0000000..798131d --- /dev/null +++ b/tests/xfs/1367.out @@ -0,0 +1,5 @@ +QA output created by 1367 +Format and populate +Find node-format attr block +Fuzz node-format attr block +Done fuzzing node-format attr block diff --git a/tests/xfs/1368 b/tests/xfs/1368 new file mode 100755 index 0000000..4d104b6 --- /dev/null +++ b/tests/xfs/1368 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1368 +# +# Populate a XFS filesystem and fuzz every external attr block field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find external attr block" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_EXTENTS_REMOTE3K) +_scratch_unmount + +echo "Fuzz external attr block" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" "ablock 1" >> $seqres.full +echo "Done fuzzing external attr block" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1368.out b/tests/xfs/1368.out new file mode 100644 index 0000000..6847bdb --- /dev/null +++ b/tests/xfs/1368.out @@ -0,0 +1,5 @@ +QA output created by 1368 +Format and populate +Find external attr block +Fuzz external attr block +Done fuzzing external attr block diff --git a/tests/xfs/1369 b/tests/xfs/1369 new file mode 100755 index 0000000..8ad106f --- /dev/null +++ b/tests/xfs/1369 @@ -0,0 +1,64 @@ +#! /bin/bash +# FS QA Test No. 1369 +# +# Populate a XFS filesystem and fuzz every rtrmapbt record field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_realtime +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +inode_ver=$(_scratch_xfs_get_metadata_field "core.version" 'sb 0' 'addr rrmapino') + +echo "Fuzz rtrmapbt recs" +_scratch_xfs_fuzz_metadata '' 'online' 'sb 0' 'addr rrmapino' "addr u${inode_ver}.rtrmapbt.ptrs[1]" >> $seqres.full +echo "Done fuzzing rtrmapbt recs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1369.out b/tests/xfs/1369.out new file mode 100644 index 0000000..9d1e592 --- /dev/null +++ b/tests/xfs/1369.out @@ -0,0 +1,4 @@ +QA output created by 1369 +Format and populate +Fuzz rtrmapbt recs +Done fuzzing rtrmapbt recs diff --git a/tests/xfs/1370 b/tests/xfs/1370 new file mode 100755 index 0000000..0bd2db8 --- /dev/null +++ b/tests/xfs/1370 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1370 +# +# Populate a XFS filesystem and fuzz every rtrmapbt keyptr field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_realtime +_require_xfs_scratch_rmapbt +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz rtrmapbt keyptrs" +_scratch_xfs_fuzz_metadata '(rtrmapbt)' 'offline' 'sb 0' 'addr rrmapino' >> $seqres.full +echo "Done fuzzing rtrmapbt keyptrs" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1370.out b/tests/xfs/1370.out new file mode 100644 index 0000000..768c9de --- /dev/null +++ b/tests/xfs/1370.out @@ -0,0 +1,4 @@ +QA output created by 1370 +Format and populate +Fuzz rtrmapbt keyptrs +Done fuzzing rtrmapbt keyptrs diff --git a/tests/xfs/1371 b/tests/xfs/1371 new file mode 100755 index 0000000..e5f5d0e --- /dev/null +++ b/tests/xfs/1371 @@ -0,0 +1,62 @@ +#! /bin/bash +# FS QA Test No. 1371 +# +# Populate a XFS filesystem and fuzz every refcountbt field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy +. ./common/reflink + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_reflink +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Fuzz refcountbt" +_scratch_xfs_fuzz_metadata '' 'online' 'agf 0' 'addr refcntroot' 'addr ptrs[1]' >> $seqres.full +echo "Done fuzzing refcountbt" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1371.out b/tests/xfs/1371.out new file mode 100644 index 0000000..08bce89 --- /dev/null +++ b/tests/xfs/1371.out @@ -0,0 +1,4 @@ +QA output created by 1371 +Format and populate +Fuzz refcountbt +Done fuzzing refcountbt diff --git a/tests/xfs/1372 b/tests/xfs/1372 new file mode 100755 index 0000000..5eacf2b --- /dev/null +++ b/tests/xfs/1372 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1372 +# +# Populate a XFS filesystem and fuzz every btree-format attr inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find btree-format attr inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/ATTR.FMT_BTREE) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1372.out b/tests/xfs/1372.out new file mode 100644 index 0000000..1907c59 --- /dev/null +++ b/tests/xfs/1372.out @@ -0,0 +1,5 @@ +QA output created by 1372 +Format and populate +Find btree-format attr inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1373 b/tests/xfs/1373 new file mode 100755 index 0000000..ce729f7 --- /dev/null +++ b/tests/xfs/1373 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1373 +# +# Populate a XFS filesystem and fuzz every blockdev inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find blockdev inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFBLK) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1373.out b/tests/xfs/1373.out new file mode 100644 index 0000000..45ed4c0 --- /dev/null +++ b/tests/xfs/1373.out @@ -0,0 +1,5 @@ +QA output created by 1373 +Format and populate +Find blockdev inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/1374 b/tests/xfs/1374 new file mode 100755 index 0000000..8a90cff --- /dev/null +++ b/tests/xfs/1374 @@ -0,0 +1,65 @@ +#! /bin/bash +# FS QA Test No. 1374 +# +# Populate a XFS filesystem and fuzz every local-format symlink inode field. +# Use xfs_scrub to fix the corruption. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017 Oracle, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1303 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 7 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/populate +. ./common/fuzzy + +# real QA test starts here +_supported_os Linux +_supported_fs xfs +_require_scratch_xfs_fuzz_fields + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Find local-format symlink inode" +_scratch_mount +inum=$(stat -c '%i' $SCRATCH_MNT/S_IFLNK.FMT_LOCAL) +_scratch_unmount + +echo "Fuzz inode" +_scratch_xfs_fuzz_metadata '' 'online' "inode ${inum}" >> $seqres.full +echo "Done fuzzing inode" + +# success, all done +status=0 +exit diff --git a/tests/xfs/1374.out b/tests/xfs/1374.out new file mode 100644 index 0000000..1f11fa4 --- /dev/null +++ b/tests/xfs/1374.out @@ -0,0 +1,5 @@ +QA output created by 1374 +Format and populate +Find local-format symlink inode +Fuzz inode +Done fuzzing inode diff --git a/tests/xfs/group b/tests/xfs/group index 10ba27b..aaece8b 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -336,3 +336,72 @@ 347 auto quick clone 400 dangerous_fuzzers 401 dangerous_fuzzers +1300 dangerous_fuzzers scrub +1301 dangerous_fuzzers dangerous_scrub dangerous_repair +1302 dangerous_fuzzers dangerous_scrub dangerous_repair +1303 dangerous_fuzzers dangerous_scrub dangerous_repair +1304 dangerous_fuzzers dangerous_scrub dangerous_repair +1305 dangerous_fuzzers dangerous_scrub dangerous_repair +1306 dangerous_fuzzers dangerous_scrub dangerous_repair +1307 dangerous_fuzzers dangerous_scrub dangerous_repair +1308 dangerous_fuzzers dangerous_scrub dangerous_repair +1309 dangerous_fuzzers dangerous_scrub dangerous_repair +1310 dangerous_fuzzers dangerous_scrub dangerous_repair +1311 dangerous_fuzzers dangerous_scrub dangerous_repair +1312 dangerous_fuzzers dangerous_scrub dangerous_repair +1313 dangerous_fuzzers dangerous_scrub dangerous_repair +1314 dangerous_fuzzers dangerous_scrub dangerous_repair +1315 dangerous_fuzzers dangerous_scrub dangerous_repair +1316 dangerous_fuzzers dangerous_scrub dangerous_repair +1317 dangerous_fuzzers dangerous_scrub dangerous_repair +1318 dangerous_fuzzers dangerous_scrub dangerous_repair +1319 dangerous_fuzzers dangerous_scrub dangerous_repair +1320 dangerous_fuzzers dangerous_scrub dangerous_repair +1321 dangerous_fuzzers dangerous_scrub dangerous_repair +1322 dangerous_fuzzers dangerous_scrub dangerous_repair +1323 dangerous_fuzzers dangerous_scrub dangerous_repair +1324 dangerous_fuzzers dangerous_scrub dangerous_repair +1325 dangerous_fuzzers dangerous_scrub dangerous_repair +1326 dangerous_fuzzers dangerous_scrub dangerous_repair +1327 dangerous_fuzzers dangerous_scrub dangerous_repair +1328 dangerous_fuzzers dangerous_scrub dangerous_repair +1329 dangerous_fuzzers dangerous_scrub dangerous_repair +1330 dangerous_fuzzers dangerous_scrub dangerous_repair +1331 dangerous_fuzzers dangerous_scrub dangerous_repair +1332 dangerous_fuzzers dangerous_scrub dangerous_repair +1333 dangerous_fuzzers dangerous_scrub dangerous_repair +1334 dangerous_fuzzers dangerous_scrub dangerous_repair +1341 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1342 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1343 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1344 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1345 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1346 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1347 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1348 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1349 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1350 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1351 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1352 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1353 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1354 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1355 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1356 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1357 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1358 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1359 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1360 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1361 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1362 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1363 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1364 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1365 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1366 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1367 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1368 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1369 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1370 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1371 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1372 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1373 dangerous_fuzzers dangerous_scrub dangerous_online_repair +1374 dangerous_fuzzers dangerous_scrub dangerous_online_repair -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html