On Thu, Nov 17, 2016 at 10:00:19PM +0800, Eryu Guan wrote:
> On Thu, Nov 17, 2016 at 07:56:58AM -0500, Brian Foster wrote:
> > On Thu, Nov 17, 2016 at 04:35:27PM +0800, Eryu Guan wrote:
> > > [cc'ed linux-xfs for inputs on a flush log issue]
> > >
> > > On Wed, Nov 16, 2016 at 07:27:53PM -0800, Jaegeuk Kim wrote:
> > > > This patch adds tests/generic/391 to test fsync and fdatasync with power-cuts.
> > > >
> > > > The rule to check is:
> > > > 1) fsync should guarantee all the inode metadata after power-cut,
> > > > 2) fdatasync should guarantee i_size and i_blocks at least after power-cut.
> > > >
> > > > Suggested-by: Chao Yu <yuchao0@xxxxxxxxxx>
> > > > Signed-off-by: Jaegeuk Kim <jaegeuk@xxxxxxxxxx>
> > > > ---
> > > > tests/generic/391 | 125 ++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > tests/generic/391.out | 11 +++++
> > > > tests/generic/group | 1 +
> > > > 3 files changed, 137 insertions(+)
> > > > create mode 100644 tests/generic/391
> > > > create mode 100644 tests/generic/391.out
> > > >
> > > > diff --git a/tests/generic/391 b/tests/generic/391
> > > > new file mode 100644
> > > > index 0000000..17c3fd3
> > > > --- /dev/null
> > > > +++ b/tests/generic/391
> > > > @@ -0,0 +1,125 @@
> > > > +#! /bin/bash
> > > > +# FS QA Test 391
> > > > +#
> > > > +# Test inode's metadata after fsync or fdatasync calls.
> > > > +# In the case of fsync, filesystem should recover all the inode metadata, while
> > > > +# recovering i_blocks and i_size at least for fdatasync.
> > > > +#
> > > > +#-----------------------------------------------------------------------
> > > > +# Copyright (c) 2016 Jaegeuk Kim. All Rights Reserved.
> > > > +#
> > > > +# This program is free software; you can redistribute it and/or
> > > > +# modify it under the terms of the GNU General Public License as
> > > > +# published by the Free Software Foundation.
> > > > +#
> > > > +# This program is distributed in the hope that it would be useful,
> > > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > > +# GNU General Public License for more details.
> > > > +#
> > > > +# You should have received a copy of the GNU General Public License
> > > > +# along with this program; if not, write the Free Software Foundation,
> > > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > > > +#-----------------------------------------------------------------------
> > > > +#
> > > > +
> > > > +seq=`basename $0`
> > > > +seqres=$RESULT_DIR/$seq
> > > > +echo "QA output created by $seq"
> > > > +
> > > > +here=`pwd`
> > > > +tmp=/tmp/$$
> > > > +status=1 # failure is the default!
> > > > +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
> > >
> > > Better to follow the template and other tests on how to do cleanup, i.e.
> > > trap _cleanup on exit and do real cleanups in it. e.g.
> > >
> > > trap "_cleanup; exit \$status" 0 1 2 3 15
> > >
> > > _cleanup()
> > > {
> > > cd /
> > > rm -f $tmp.*
> > > }
> > >
> > > Not a big deal, but it's better to maintain consistency :)
> > >
> > > > +
> > > > +# get standard environment, filters and checks
> > > > +. ./common/rc
> > > > +. ./common/filter
> > > > +. ./common/punch
> > > > +
> > > > +# real QA test starts here
> > > > +_supported_fs generic
> > > > +_supported_os Linux
> > > > +
> > > > +rm -f $seqres.full
> > > > +_require_scratch
> > > > +_require_scratch_shutdown
> > > > +_require_xfs_io_command "fpunch"
> > > > +
> > > > +_scratch_mkfs >/dev/null 2>&1
> > > > +_scratch_mount
> > > > +
> > > > +testfile=$SCRATCH_MNT/testfile
> > > > +
> > > > +# check inode metadata after shutdown
> > > > +_check_inode_metadata()
> > >
> > > No need to name local functions with the leading "_", that's for global
> > > helper functions.
> > >
> > > > +{
> > > > + src/godown $SCRATCH_MNT >> $seqres.full
> > > > + $XFS_IO_PROG -r -c "stat -v" $1 >$tmp.before
> > >
> > > Shouldn't we call godown *after* xfs_io -c stat? I saw EIO on this
> > > xfs_io command and all sub-tests reported stat diff.
> > >
> >
> > Yeah.. I haven't run the test, but I would expect pretty much anything
> > to return an error after an fs shutdown.
> >
> > > And perhaps we need to flush the log on godown for XFS? i.e.
> > >
> > > src/godown -f $SCRATCH_MNT >> $seqres.full
> > >
> >
> > I don't think this is necessary. The semantics of fsync() dictate that
> > the fs do what is necessary to make the file persistent on disk. This
> > means it is the fs responsibility to ensure the changes are logged on
> > disk. Indeed, xfs_file_fsync() calls _xfs_log_force_lsn() to flush the
> > log up to the most recent LSN that covered the inode in question.
> >
> > > Otherwise XFS fails all the "1024" & fsync tests (after I fixed the
> > > godown & xfs_io order locally), fdatasync tests are fine.
> > >
> > > @@ -1,8 +1,16 @@
> > > QA output created by 391
> > > ==== i_size 1024 test with fsync ====
> > > +6c6
> > > +< stat.blocks = 8200
> > > +---
> > > +> stat.blocks = 16256
> > > ==== i_size 4096 test with fsync ====
> > > ==== i_time test with fsync ====
> > > ==== fpunch 1024 test with fsync ====
> > > +6c6
> > > +< stat.blocks = 8208
> > > +---
> > > +> stat.blocks = 24576
> > > ==== fpunch 4096 test with fsync ====
> > >
> > > Not sure if this is the expected behavior on XFS. cc'ed xfs list for
> > > some inputs.
> > >
> >
> > Am I reading this correctly that you're seeing more blocks than
> > expected? If so, preallocation perhaps?
>
> Yes, you're correct, I see more blocks after godown than before godown.
>
> I tried adding "-o allocsize=4k" to MOUNT_OPTIONS, it works but not
> always. e.g. on a host with sunit/swidth reported from underlying block
> device, test still fails.
>
I'm not quite sure where the preallocation is coming from in that case.
It looks like it should honor allocsize, so that might be worth looking
into.
> # xfs_info /mnt/xfs
> meta-data=/dev/mapper/systemvg-testlv2 isize=512 agcount=16, agsize=245696 blks
> = sectsz=512 attr=2, projid32bit=1
> = crc=1 finobt=1 spinodes=0 rmapbt=0
> = reflink=0
> data = bsize=4096 blocks=3931136, imaxpct=25
> = sunit=64 swidth=192 blks
> naming =version 2 bsize=4096 ascii-ci=0 ftype=1
> log =internal bsize=4096 blocks=2560, version=2
> = sectsz=512 sunit=64 blks, lazy-count=1
> realtime =none extsz=4096 blocks=0, rtextents=0
>
> Part of the test diff:
> ==== i_size 1024 test with fsync ====
> +6c6
> +< stat.blocks = 8200
> +---
> +> stat.blocks = 8704
>
> On the other hand, adding "-f" to godown always works for me.
>
I'm guessing the difference here is that fsync flushes the inode with
preallocation, but preallocation is typically cleaned up on file close
(when xfs_io exits). So a subsequent log flush at shutdown may flush
the transaction that clears out post-eof blocks. Note that it may also
hit the disk without the log forcing shutdown, it's just not guaranteed
in that case.
The right thing to do is probably deal with preallocation explicitly in
the test. E.g., a truncate of the file to the current size after a
potentially preallocated write, but before the fsync, should always
result in an equivalent blocks count post-recovery.
(Another angle here might be to consider whether the block count is the
right metric for this test, as opposed to a hexdump that validates the
written data actually made it to disk.).
Brian
> Thanks,
> Eryu
>
> >
> > Brian
> >
> > > > + _scratch_cycle_mount
> > > > + $XFS_IO_PROG -r -c "stat -v" $1 >$tmp.after
> > > > + diff $tmp.before $tmp.after >>$tmp.diff
> > >
> > > I think $tmp.diff should be overwritten on each sub-test.
> > >
> > > > +
> > > > + if [ "$2" = "fdatasync" ]; then
> > > > + cat $tmp.diff | grep stat.size
> > > > + cat $tmp.diff | grep stat.blocks
> > > > + else
> > > > + cat $tmp.diff
> > > > + fi
> > > > + cat $tmp.before >> $seqres.full
> > > > + cat $tmp.after >> $seqres.full
> > > > +}
> > > > +
> > > > +# append XX KB with f{data}sync, followed by power-cut
> > > > +_test_i_size()
> > > > +{
> > > > + echo "==== i_size $2 test with $1 ===="
> > >
> > > I find it's much easier to read the $seqres.full log if we append these
> > > kind of logs to $seqres.full too, e.g.
> > >
> > > echo "==== i_size $2 test with $1 ====" | tee -a $seqres.full
> > >
> > > Thanks,
> > > Eryu
> > >
> > > > + $XFS_IO_PROG -f -c "pwrite 0 4M" \
> > > > + -c "fsync" \
> > > > + -c "pwrite 4M $2" \
> > > > + -c "$1" \
> > > > + $testfile >/dev/null
> > > > + _check_inode_metadata $testfile $1
> > > > +}
> > > > +
> > > > +# update times with f{data}sync, followed by power-cut
> > > > +_test_i_time()
> > > > +{
> > > > + echo "==== i_time test with $1 ===="
> > > > + $XFS_IO_PROG -f -c "pwrite 0 4M" \
> > > > + -c "fsync" \
> > > > + $testfile >/dev/null
> > > > + sleep 1
> > > > + touch $testfile
> > > > + $XFS_IO_PROG -c "$1" \
> > > > + $testfile >/dev/null
> > > > + _check_inode_metadata $testfile $1
> > > > +}
> > > > +
> > > > +# punch XX KB with f{data}sync, followed by power-cut
> > > > +_test_punch()
> > > > +{
> > > > + echo "==== fpunch $2 test with $1 ===="
> > > > + $XFS_IO_PROG -f -c "pwrite 0 4202496" \
> > > > + -c "fsync" \
> > > > + -c "fpunch 4194304 $2"\
> > > > + -c "$1" \
> > > > + $testfile >/dev/null
> > > > +
> > > > + _check_inode_metadata $testfile $1
> > > > +}
> > > > +
> > > > +for i in fsync fdatasync
> > > > +do
> > > > + _test_i_size $i 1024
> > > > + _test_i_size $i 4096
> > > > + _test_i_time $i
> > > > + _test_punch $i 1024
> > > > + _test_punch $i 4096
> > > > +done
> > > > +
> > > > +rm -f $tmp.*
> > > > +
> > > > +# success, all done
> > > > +status=0
> > > > +exit
> > > > diff --git a/tests/generic/391.out b/tests/generic/391.out
> > > > new file mode 100644
> > > > index 0000000..7c66776
> > > > --- /dev/null
> > > > +++ b/tests/generic/391.out
> > > > @@ -0,0 +1,11 @@
> > > > +QA output created by 391
> > > > +==== i_size 1024 test with fsync ====
> > > > +==== i_size 4096 test with fsync ====
> > > > +==== i_time test with fsync ====
> > > > +==== fpunch 1024 test with fsync ====
> > > > +==== fpunch 4096 test with fsync ====
> > > > +==== i_size 1024 test with fdatasync ====
> > > > +==== i_size 4096 test with fdatasync ====
> > > > +==== i_time test with fdatasync ====
> > > > +==== fpunch 1024 test with fdatasync ====
> > > > +==== fpunch 4096 test with fdatasync ====
> > > > diff --git a/tests/generic/group b/tests/generic/group
> > > > index 08007d7..9de3415 100644
> > > > --- a/tests/generic/group
> > > > +++ b/tests/generic/group
> > > > @@ -392,3 +392,4 @@
> > > > 387 auto clone
> > > > 388 auto log metadata
> > > > 389 auto quick acl
> > > > +391 auto quick metadata
> > > > --
> > > > 2.8.3
> > > >
> > > > --
> > > > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
