[PATCH v3 05/12] gpiolib: remove legacy gpio_export

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arnd Bergmann <arnd@xxxxxxxx>

There are only a handful of users of gpio_export() and
related functions.

As these are just wrappers around the modern gpiod_export()
helper, remove the wrappers and open-code the gpio_to_desc
in all callers to shrink the legacy API.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 Documentation/admin-guide/gpio/sysfs.rst      |  2 +-
 Documentation/driver-api/gpio/legacy.rst      | 21 ---------------
 .../zh_CN/driver-api/gpio/legacy.rst          | 19 -------------
 Documentation/translations/zh_TW/gpio.txt     | 18 -------------
 arch/arm/mach-omap2/pdata-quirks.c            |  9 ++++---
 arch/sh/boards/mach-ap325rxa/setup.c          |  7 ++---
 drivers/gpio/gpiolib-sysfs.c                  |  4 +--
 drivers/media/pci/sta2x11/sta2x11_vip.c       | 10 ++++---
 drivers/net/ieee802154/ca8210.c               |  3 ++-
 include/linux/gpio.h                          | 27 -------------------
 10 files changed, 21 insertions(+), 99 deletions(-)

diff --git a/Documentation/admin-guide/gpio/sysfs.rst b/Documentation/admin-guide/gpio/sysfs.rst
index ec09ffd983e7..35171d15f78d 100644
--- a/Documentation/admin-guide/gpio/sysfs.rst
+++ b/Documentation/admin-guide/gpio/sysfs.rst
@@ -145,7 +145,7 @@ requested using gpio_request()::
 	/* export the GPIO to userspace */
 	int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
 
-	/* reverse gpio_export() */
+	/* reverse gpiod_export() */
 	void gpiod_unexport(struct gpio_desc *desc);
 
 	/* create a sysfs link to an exported GPIO node */
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index e0306e78e34b..78372853c6d4 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -714,27 +714,6 @@ gpiochip nodes (possibly in conjunction with schematics) to determine
 the correct GPIO number to use for a given signal.
 
 
-Exporting from Kernel code
---------------------------
-Kernel code can explicitly manage exports of GPIOs which have already been
-requested using gpio_request()::
-
-	/* export the GPIO to userspace */
-	int gpio_export(unsigned gpio, bool direction_may_change);
-
-	/* reverse gpio_export() */
-	void gpio_unexport();
-
-After a kernel driver requests a GPIO, it may only be made available in
-the sysfs interface by gpio_export().  The driver can control whether the
-signal direction may change.  This helps drivers prevent userspace code
-from accidentally clobbering important system state.
-
-This explicit exporting can help with debugging (by making some kinds
-of experiments easier), or can provide an always-there interface that's
-suitable for documenting as part of a board support package.
-
-
 API Reference
 =============
 
diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
index dee2a0517c1c..84ce2322fdba 100644
--- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
+++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
@@ -653,25 +653,6 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
 确定给定信号所用的 GPIO 编号。
 
 
-从内核代码中导出
-----------------
-
-内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出::
-
-	/* 导出 GPIO 到用户空间 */
-	int gpio_export(unsigned gpio, bool direction_may_change);
-
-	/* gpio_export()的逆操作 */
-	void gpio_unexport();
-
-在一个内核驱动申请一个 GPIO 之后,它可以通过 gpio_export()使其在 sysfs
-接口中可见。该驱动可以控制信号方向是否可修改。这有助于防止用户空间代码无意间
-破坏重要的系统状态。
-
-这个明确的导出有助于(通过使某些实验更容易来)调试,也可以提供一个始终存在的接口,
-与文档配合作为板级支持包的一部分。
-
-
 API参考
 =======
 
diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
index dc608358d90a..62e560ffe628 100644
--- a/Documentation/translations/zh_TW/gpio.txt
+++ b/Documentation/translations/zh_TW/gpio.txt
@@ -614,21 +614,3 @@ GPIO 控制器的路徑類似 /sys/class/gpio/gpiochip42/ (對於從#42 GPIO
 固定的,例如在擴展卡上的 GPIO會根據所使用的主板或所在堆疊架構中其他的板子而
 有所不同。在這種情況下,你可能需要使用 gpiochip 節點(儘可能地結合電路圖)來
 確定給定信號所用的 GPIO 編號。
-
-
-從內核代碼中導出
--------------
-內核代碼可以明確地管理那些已通過 gpio_request()申請的 GPIO 的導出:
-
-	/* 導出 GPIO 到用戶空間 */
-	int gpio_export(unsigned gpio, bool direction_may_change);
-
-	/* gpio_export()的逆操作 */
-	void gpio_unexport();
-
-在一個內核驅動申請一個 GPIO 之後,它可以通過 gpio_export()使其在 sysfs
-接口中可見。該驅動可以控制信號方向是否可修改。這有助於防止用戶空間代碼無意間
-破壞重要的系統狀態。
-
-這個明確的導出有助於(通過使某些實驗更容易來)調試,也可以提供一個始終存在的接口,
-與文檔配合作爲板級支持包的一部分。
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index baba73fd6f11..04208cc52784 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,6 +6,7 @@
  */
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -108,7 +109,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
 	if (res)
 		return res;
 
-	gpio_export(gpio, 0);
+	gpiod_export(gpio_to_desc(gpio), 0);
 
 	return 0;
 }
@@ -123,7 +124,7 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
 		return;
 	}
 
-	gpio_export(gpio, 0);
+	gpiod_export(gpio_to_desc(gpio), 0);
 
 	udelay(10);
 	gpio_set_value(gpio, 1);
@@ -200,8 +201,8 @@ static void __init omap3_sbc_t3517_wifi_init(void)
 		return;
 	}
 
-	gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
-	gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
+	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
 
 	msleep(100);
 	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index c77b5f00a66a..151792162152 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -411,16 +412,16 @@ static int __init ap325rxa_devices_setup(void)
 	/* LD3 and LD4 LEDs */
 	gpio_request(GPIO_PTX5, NULL); /* RUN */
 	gpio_direction_output(GPIO_PTX5, 1);
-	gpio_export(GPIO_PTX5, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTX5), 0);
 
 	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
 	gpio_direction_output(GPIO_PTX4, 0);
-	gpio_export(GPIO_PTX4, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTX4), 0);
 
 	/* SW1 input */
 	gpio_request(GPIO_PTF7, NULL); /* MODE */
 	gpio_direction_input(GPIO_PTF7);
-	gpio_export(GPIO_PTF7, 0);
+	gpiod_export(gpio_to_desc(GPIO_PTF7), 0);
 
 	/* LCDC */
 	gpio_request(GPIO_FN_LCDD15, NULL);
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index cd27bf173dec..6e4267944f80 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -491,7 +491,7 @@ static ssize_t unexport_store(struct class *class,
 		goto done;
 
 	desc = gpio_to_desc(gpio);
-	/* reject bogus commands (gpio_unexport ignores them) */
+	/* reject bogus commands (gpiod_unexport() ignores them) */
 	if (!desc) {
 		pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
 		return -EINVAL;
@@ -790,7 +790,7 @@ static int __init gpiolib_sysfs_init(void)
 	 * early (e.g. before the class_register above was called).
 	 *
 	 * We run before arch_initcall() so chip->dev nodes can have
-	 * registered, and so arch_initcall() can always gpio_export().
+	 * registered, and so arch_initcall() can always gpiod_export().
 	 */
 	spin_lock_irqsave(&gpio_lock, flags);
 	list_for_each_entry(gdev, &gpio_devices, list) {
diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c
index 8535e49a4c4f..e4cf9d63e926 100644
--- a/drivers/media/pci/sta2x11/sta2x11_vip.c
+++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
@@ -889,6 +890,7 @@ static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
 static int vip_gpio_reserve(struct device *dev, int pin, int dir,
 			    const char *name)
 {
+	struct gpio_desc *desc = gpio_to_desc(pin);
 	int ret = -ENODEV;
 
 	if (!gpio_is_valid(pin))
@@ -900,7 +902,7 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
 		return ret;
 	}
 
-	ret = gpio_direction_output(pin, dir);
+	ret = gpiod_direction_output(desc, dir);
 	if (ret) {
 		dev_err(dev, "Failed to set direction for pin %d (%s)\n",
 			pin, name);
@@ -908,7 +910,7 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
 		return ret;
 	}
 
-	ret = gpio_export(pin, false);
+	ret = gpiod_export(desc, false);
 	if (ret) {
 		dev_err(dev, "Failed to export pin %d (%s)\n", pin, name);
 		gpio_free(pin);
@@ -928,8 +930,10 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
 static void vip_gpio_release(struct device *dev, int pin, const char *name)
 {
 	if (gpio_is_valid(pin)) {
+		struct gpio_desc *desc = gpio_to_desc(pin);
+
 		dev_dbg(dev, "releasing pin %d (%s)\n",	pin, name);
-		gpio_unexport(pin);
+		gpiod_unexport(desc);
 		gpio_free(pin);
 	}
 }
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index e1a569b99e4a..5c0be6a3ec5e 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -51,6 +51,7 @@
 #include <linux/clk-provider.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
 #include <linux/ieee802154.h>
 #include <linux/io.h>
@@ -2853,7 +2854,7 @@ static int ca8210_interrupt_init(struct spi_device *spi)
 	);
 	if (ret) {
 		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
-		gpio_unexport(pdata->gpio_irq);
+		gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
 		gpio_free(pdata->gpio_irq);
 	}
 
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 220e8656f2ab..a1271526e489 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -132,20 +132,6 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
 int gpio_request_array(const struct gpio *array, size_t num);
 void gpio_free_array(const struct gpio *array, size_t num);
 
-/*
- * A sysfs interface can be exported by individual drivers if they want,
- * but more typically is configured entirely from userspace.
- */
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
-	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-	gpiod_unexport(gpio_to_desc(gpio));
-}
-
 /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
 
 struct device;
@@ -243,19 +229,6 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	WARN_ON(1);
 }
 
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
-	/* GPIO can never have been requested or set as {in,out}put */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-	/* GPIO can never have been exported */
-	WARN_ON(1);
-}
-
 static inline int gpio_to_irq(unsigned gpio)
 {
 	/* GPIO can never have been requested or set as input */
-- 
2.39.1




[Index of Archives]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux