dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
---
drivers/net/ieee802154/mcr20a.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
index 2fe0e4a0a0c4..f53d185e0568 100644
--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -1233,12 +1233,9 @@ mcr20a_probe(struct spi_device *spi)
}
rst_b = devm_gpiod_get(&spi->dev, "rst_b", GPIOD_OUT_HIGH);
- if (IS_ERR(rst_b)) {
- ret = PTR_ERR(rst_b);
- if (ret != -EPROBE_DEFER)
- dev_err(&spi->dev, "Failed to get 'rst_b' gpio: %d", ret);
- return ret;
- }
+ if (IS_ERR(rst_b))
+ return dev_err_probe(&spi->dev, PTR_ERR(rst_b),
+ "Failed to get 'rst_b' gpio");
/* reset mcr20a */
usleep_range(10, 20);
--
2.25.1
