This patch adds an additional byte for tx done for the trac status
register which can then evaluated by the atusb Linux driver.
We need to move the transition to RX_AACK_ON after reading the trac
register value. The current optimization by switchting to RX_AACK_ON
after invoking transceiver transmission could have the side effect that
the trac register is not read out before a frame is received. Receiving
another frame will overwrite the trac register. We can only switch to
RX_AACK_ON state after we read out the trac register.
---
Not tested yet.
atusb/fw/mac.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/atusb/fw/mac.c b/atusb/fw/mac.c
index 835002c..165ce30 100644
--- a/atusb/fw/mac.c
+++ b/atusb/fw/mac.c
@@ -32,7 +32,7 @@ static uint8_t tx_buf[MAX_PSDU];
static uint8_t tx_size = 0;
static bool txing = 0;
static bool queued_tx_ack = 0;
-static uint8_t next_seq, this_seq, queued_seq;
+static uint8_t next_seq, this_seq, this_data[2], queued_data[2];
/* ----- Receive buffer management ----------------------------------------- */
@@ -65,7 +65,8 @@ static void usb_next(void)
}
if (queued_tx_ack) {
- usb_send(&eps[1], &queued_seq, 1, tx_ack_done, NULL);
+ usb_send(&eps[1], queued_data, sizeof(queued_data),
+ tx_ack_done, NULL);
queued_tx_ack = 0;
}
}
@@ -124,11 +125,17 @@ static bool handle_irq(void)
if (txing) {
if (eps[1].state == EP_IDLE) {
- usb_send(&eps[1], &this_seq, 1, tx_ack_done, NULL);
+ this_data[0] = this_seq;
+ this_data[1] = reg_read(REG_TRX_STATE);
+ usb_send(&eps[1], this_data, sizeof(this_data),
+ tx_ack_done, NULL);
} else {
queued_tx_ack = 1;
- queued_seq = this_seq;
+ queued_data[0] = this_seq;
+ queued_data[1] = reg_read(REG_TRX_STATE);
}
+ change_state(TRX_CMD_PLL_ON);
+ change_state(TRX_CMD_RX_AACK_ON);
txing = 0;
return 1;
}
@@ -215,13 +222,6 @@ static void do_tx(void *user)
txing = 1;
this_seq = next_seq;
-
- /*
- * Wait until we reach BUSY_TX_ARET, so that we command the transition to
- * RX_AACK_ON which will be executed upon TX completion.
- */
- change_state(TRX_CMD_PLL_ON);
- change_state(TRX_CMD_RX_AACK_ON);
}
@@ -242,7 +242,7 @@ void mac_reset(void)
txing = 0;
queued_tx_ack = 0;
rx_in = rx_out = 0;
- next_seq = this_seq = queued_seq = 0;
+ next_seq = this_seq = queued_data[0], queued_data[1] = 0;
/* enable CRC and PHY_RSSI (with RX_CRC_VALID) in SPI status return */
reg_write(REG_TRX_CTRL_1,
--
2.31.1
