There are more codes than already listed, let's be a bit more
exhaustive. This will allow to drop device drivers local definitions of
these codes.
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
include/linux/ieee802154.h | 67 +++++++++++++++++++++++++++++++++++++-
1 file changed, 66 insertions(+), 1 deletion(-)
diff --git a/include/linux/ieee802154.h b/include/linux/ieee802154.h
index 01d945c8b2e1..f1f9412b6ac6 100644
--- a/include/linux/ieee802154.h
+++ b/include/linux/ieee802154.h
@@ -134,7 +134,35 @@ enum {
* a successful transmission.
*/
IEEE802154_SUCCESS = 0x0,
-
+ /* The requested operation failed. */
+ IEEE802154_MAC_ERROR = 0x1,
+ /* The requested operation has been cancelled. */
+ IEEE802154_CANCELLED = 0x2,
+ /*
+ * Device is ready to poll the coordinator for data in a non beacon
+ * enabled PAN.
+ */
+ IEEE802154_READY_FOR_POLL = 0x3,
+ /* Wrong frame counter. */
+ IEEE802154_COUNTER_ERROR = 0xdb,
+ /*
+ * The frame does not conforms to the incoming key usage policy checking
+ * procedure.
+ */
+ IEEE802154_IMPROPER_KEY_TYPE = 0xdc,
+ /*
+ * The frame does not conforms to the incoming security level usage
+ * policy checking procedure.
+ */
+ IEEE802154_IMPROPER_SECURITY_LEVEL = 0xdd,
+ /* Secured frame received with an empty Frame Version field. */
+ IEEE802154_UNSUPPORTED_LEGACY = 0xde,
+ /*
+ * A secured frame is received or must be sent but security is not
+ * enabled in the device. Or, the Auxiliary Security Header has security
+ * level of zero in it.
+ */
+ IEEE802154_UNSUPPORTED_SECURITY = 0xdf,
/* The beacon was lost following a synchronization request. */
IEEE802154_BEACON_LOST = 0xe0,
/*
@@ -204,11 +232,48 @@ enum {
* that is not supported.
*/
IEEE802154_UNSUPPORTED_ATTRIBUTE = 0xf4,
+ /* Missing source or destination address or address mode. */
+ IEEE802154_INVALID_ADDRESS = 0xf5,
+ /*
+ * MLME asked to turn the receiver on, but the on time duration is too
+ * big compared to the macBeaconOrder.
+ */
+ IEEE802154_ON_TIME_TOO_LONG = 0xf6,
+ /*
+ * MLME asaked to turn the receiver on, but the request was delayed for
+ * too long before getting processed.
+ */
+ IEEE802154_PAST_TIME = 0xf7,
+ /*
+ * The StartTime parameter is nonzero, and the MLME is not currently
+ * tracking the beacon of the coordinator through which it is
+ * associated.
+ */
+ IEEE802154_TRACKING_OFF = 0xf8,
+ /*
+ * The index inside the hierarchical values in PIBAttribute is out of
+ * range.
+ */
+ IEEE802154_INVALID_INDEX = 0xf9,
+ /*
+ * The number of PAN descriptors discovered during a scan has been
+ * reached.
+ */
+ IEEE802154_LIMIT_REACHED = 0xfa,
+ /*
+ * The PIBAttribute parameter specifies an attribute that is a read-only
+ * attribute.
+ */
+ IEEE802154_READ_ONLY = 0xfb,
/*
* A request to perform a scan operation failed because the MLME was
* in the process of performing a previously initiated scan operation.
*/
IEEE802154_SCAN_IN_PROGRESS = 0xfc,
+ /* The outgoing superframe overlaps the incoming superframe. */
+ IEEE802154_SUPERFRAME_OVERLAP = 0xfd,
+ /* Any other error situation. */
+ IEEE802154_SYSTEM_ERROR = 0xff,
};
/* frame control handling */
--
2.27.0
