Alex, I am referring to the presentation you gave on Netdev 2.1 IOT Without Things: Building virtual 6LoWPAN Mesh Networks I am trying to connect PHY0 and PHY1 as shown in the presentation but so far Iam unable to do so. I could get only following steps from the video echo “add 1 2” > /sys/kernel/debug/fakelb/edges ip netns exec wpan0 sh ~/host lowpan0 0 & Can you please provide the sequence of steps you used to connect PHY0 and PHY1 ? -----Original Message----- From: Alexander Aring [mailto:aring@xxxxxxxxxxxx] Sent: Tuesday, September 25, 2018 2:27 AM To: Sujay G <sujay.g@xxxxxxx> Cc: Michael Richardson <mcr@xxxxxxxxxxxx>; linux-wpan@xxxxxxxxxxxxxxx Subject: Re: about openthread and 6lowpan Hi, On Thu, Sep 20, 2018 at 06:57:44AM +0000, Sujay G wrote: > Alex, > Just wanted to mention that I am building on ubuntu -linux. (End solution is to run the openthread nodes inside containers and establish communication via fakeLB) . > Wondering if it is possible to connect the PHY devices and establish communication without RIOT? Or is RIOT required to establish communication between PHY devices ? > You don't need containers. Only if you use more than one linux IP interfaces it's needed to avoid internal routing without hitting the mac layer. You don't need RIOT, you can use RIOT... you can use whatever you want to connect to each other... question is if they will understand each other. For openthread you need their to speak their MLE protocol otherwise you will not get any communication. - Alex ::DISCLAIMER:: -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------