Hello.
On 07/14/2018 06:36 PM, Alexander Aring wrote:
> This patch adds initial support for wpan-hwsim utility to control the
> mac802154_hwsim driver over netlink.
>
> Signed-off-by: Alexander Aring <aring@xxxxxxxxxxxx>
> ---
> Makefile.am | 1 +
> configure.ac | 1 +
> wpan-hwsim/Makefile.am | 8 +
> wpan-hwsim/mac802154_hwsim.h | 73 +++++++
> wpan-hwsim/wpan-hwsim.c | 510 +++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 593 insertions(+)
> create mode 100644 wpan-hwsim/Makefile.am
> create mode 100644 wpan-hwsim/mac802154_hwsim.h
> create mode 100644 wpan-hwsim/wpan-hwsim.c
>
> diff --git a/Makefile.am b/Makefile.am
> index 37f18b6..3f15825 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -21,4 +21,5 @@ AM_LDFLAGS = \
> SUBDIRS = \
> src \
> wpan-ping \
> + wpan-hwsim \
> examples
> diff --git a/configure.ac b/configure.ac
> index 5dd59dc..a983532 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -56,6 +56,7 @@ AC_CONFIG_FILES([
> Makefile
> src/Makefile
> wpan-ping/Makefile
> + wpan-hwsim/Makefile
> examples/Makefile
> ])
>
> diff --git a/wpan-hwsim/Makefile.am b/wpan-hwsim/Makefile.am
> new file mode 100644
> index 0000000..f688cd9
> --- /dev/null
> +++ b/wpan-hwsim/Makefile.am
> @@ -0,0 +1,8 @@
> +bin_PROGRAMS = wpan-hwsim
> +
> +wpan_hwsim_SOURCES = wpan-hwsim.c
> +
> +wpan_hwsim_CFLAGS = $(AM_CFLAGS) $(LIBNL3_CFLAGS)
> +wpan_hwsim_LDADD = $(LIBNL3_LIBS)
> +
> +EXTRA_DIST = README.wpan-hwsim
> diff --git a/wpan-hwsim/mac802154_hwsim.h b/wpan-hwsim/mac802154_hwsim.h
> new file mode 100644
> index 0000000..6c6e30e
> --- /dev/null
> +++ b/wpan-hwsim/mac802154_hwsim.h
> @@ -0,0 +1,73 @@
> +#ifndef __MAC802154_HWSIM_H
> +#define __MAC802154_HWSIM_H
> +
> +/* mac802154 hwsim netlink commands
> + *
> + * @MAC802154_HWSIM_CMD_UNSPEC: unspecified command to catch error
> + * @MAC802154_HWSIM_CMD_GET_RADIO: fetch information about existing radios
> + * @MAC802154_HWSIM_CMD_SET_RADIO: change radio parameters during runtime
> + * @MAC802154_HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters
> + * returns the radio ID (>= 0) or negative on errors, if successful
> + * then multicast the result
> + * @MAC802154_HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
> + * @MAC802154_HWSIM_CMD_GET_EDGE: fetch information about existing edges
> + * @MAC802154_HWSIM_CMD_SET_EDGE: change edge parameters during runtime
> + * @MAC802154_HWSIM_CMD_DEL_EDGE: delete edges between radios
> + * @MAC802154_HWSIM_CMD_NEW_EDGE: create a new edge between two radios
> + * @__MAC802154_HWSIM_CMD_MAX: enum limit
> + */
> +enum {
> + MAC802154_HWSIM_CMD_UNSPEC,
> +
> + MAC802154_HWSIM_CMD_GET_RADIO,
> + MAC802154_HWSIM_CMD_SET_RADIO,
> + MAC802154_HWSIM_CMD_NEW_RADIO,
> + MAC802154_HWSIM_CMD_DEL_RADIO,
> +
> + MAC802154_HWSIM_CMD_GET_EDGE,
> + MAC802154_HWSIM_CMD_SET_EDGE,
> + MAC802154_HWSIM_CMD_DEL_EDGE,
> + MAC802154_HWSIM_CMD_NEW_EDGE,
> +
> + __MAC802154_HWSIM_CMD_MAX,
> +};
> +
> +#define MAC802154_HWSIM_CMD_MAX (__MAC802154_HWSIM_MAX - 1)
> +
> +/* mac802154 hwsim netlink attributes
> + *
> + * @MAC802154_HWSIM_ATTR_UNSPEC: unspecified attribute to catch error
> + * @MAC802154_HWSIM_ATTR_RADIO_ID: u32 attribute to identify the radio
> + * @MAC802154_HWSIM_ATTR_EDGE: nested attribute of edges
> + * @MAC802154_HWSIM_ATTR_EDGES: list if nested attributes which contains the
> + * edge information according the radio id
> + * @__MAC802154_HWSIM_ATTR_MAX: enum limit
> + */
> +enum {
> + MAC802154_HWSIM_ATTR_UNSPEC,
> + MAC802154_HWSIM_ATTR_RADIO_ID,
> + MAC802154_HWSIM_ATTR_RADIO_EDGE,
> + MAC802154_HWSIM_ATTR_RADIO_EDGES,
> + __MAC802154_HWSIM_ATTR_MAX,
> +};
> +
> +#define MAC802154_HWSIM_ATTR_MAX (__MAC802154_HWSIM_ATTR_MAX - 1)
> +
> +/* mac802154 hwsim edge netlink attributes
> + *
> + * @MAC802154_HWSIM_EDGE_ATTR_UNSPEC: unspecified attribute to catch error
> + * @MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID: radio id where the edge points to
> + * @MAC802154_HWSIM_EDGE_ATTR_LQI: LQI value which the endpoint radio will
> + * receive for this edge
> + * @__MAC802154_HWSIM_ATTR_MAX: enum limit
> + */
> +enum {
> + MAC802154_HWSIM_EDGE_ATTR_UNSPEC,
> + MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID,
> + MAC802154_HWSIM_EDGE_ATTR_LQI,
> + __MAC802154_HWSIM_EDGE_ATTR_MAX,
> +};
> +
> +#define MAC802154_HWSIM_EDGE_ATTR_MAX (__MAC802154_HWSIM_EDGE_ATTR_MAX - 1)
> +
> +#endif /* __MAC802154_HWSIM_H */
> diff --git a/wpan-hwsim/wpan-hwsim.c b/wpan-hwsim/wpan-hwsim.c
> new file mode 100644
> index 0000000..f4ecf10
> --- /dev/null
> +++ b/wpan-hwsim/wpan-hwsim.c
> @@ -0,0 +1,510 @@
> +/*
> + * Linux IEEE 802.15.4 hwsim tool
> + *
> + * Copyright (C) 2018 Alexander Aring <aring@xxxxxxxxxxxx>
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */
> +
> +#include <inttypes.h>
> +#include <stdbool.h>
> +#include <getopt.h>
> +#include <stdint.h>
> +#include <limits.h>
> +#include <errno.h>
> +#include <stdio.h>
> +
> +#include <netlink/netlink.h>
> +
> +#include <netlink/genl/genl.h>
> +#include <netlink/genl/family.h>
> +#include <netlink/genl/ctrl.h>
> +
> +#include "mac802154_hwsim.h"
> +#include "config.h"
> +
> +static struct nl_sock *nl_sock;
> +static int nlhwsim_id;
> +
> +static int nlhwsim_init(void)
> +{
> + int err;
> +
> + nl_sock = nl_socket_alloc();
> + if (!nl_sock) {
> + fprintf(stderr, "Failed to allocate netlink socket.\n");
> + return -ENOMEM;
> + }
> +
> + nl_socket_set_buffer_size(nl_sock, 8192, 8192);
> +
> + if (genl_connect(nl_sock)) {
> + fprintf(stderr, "Failed to connect to generic netlink.\n");
> + err = -ENOLINK;
> + goto out_handle_destroy;
> + }
> +
> + nlhwsim_id = genl_ctrl_resolve(nl_sock, "MAC802154_HWSIM");
> + if (nlhwsim_id < 0) {
> + fprintf(stderr, "MAC802154_HWSIM not found.\n");
> + err = -ENOENT;
> + nl_close(nl_sock);
> + goto out_handle_destroy;
> + }
> +
> + return 0;
> +
> +out_handle_destroy:
> + nl_socket_free(nl_sock);
> + return err;
> +}
> +
> +static void nlhwsim_cleanup(void)
> +{
> + nl_close(nl_sock);
> + nl_socket_free(nl_sock);
> +}
> +
> +static int error_handler(struct sockaddr_nl *nla, struct nlmsgerr *err,
> + void *arg)
> +{
> + int *ret = arg;
> + *ret = err->error;
> + return NL_STOP;
> +}
> +
> +static int hwsim_create(void)
> +{
> + struct nl_msg *msg;
> + struct nl_cb *cb;
> + int idx = 0, ret;
> +
> + cb = nl_cb_alloc(NL_CB_DEFAULT);
> + if (!cb)
> + return -ENOMEM;
> +
> + msg = nlmsg_alloc();
> + if (!msg) {
> + nl_cb_put(cb);
> + return -ENOMEM;
> + }
> +
> + genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, nlhwsim_id, 0, 0,
> + MAC802154_HWSIM_CMD_NEW_RADIO, 0);
> + ret = nl_send_auto(nl_sock, msg);
> + if (ret < 0) {
> + nl_cb_put(cb);
> + return ret;
> + }
> +
> + nl_cb_err(cb, NL_CB_CUSTOM, error_handler, &idx);
> + nl_recvmsgs(nl_sock, cb);
> + printf("wpan_hwsim radio%d registered.\n", idx);
> +
> + nl_cb_put(cb);
> +
> + return 0;
> +}
> +
> +static int nl_msg_dot_cb(struct nl_msg* msg, void* arg)
> +{
> + static struct nla_policy edge_policy[MAC802154_HWSIM_EDGE_ATTR_MAX + 1] = {
> + [MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID] = { .type = NLA_U32 },
> + [MAC802154_HWSIM_EDGE_ATTR_LQI] = { .type = NLA_U8 },
> + };
> + struct nlmsghdr *nlh = nlmsg_hdr(msg);
> + struct genlmsghdr *gnlh = (struct genlmsghdr*) nlmsg_data(nlh);
> + struct nlattr *attrs[MAC802154_HWSIM_ATTR_MAX + 1];
> + struct nlattr *edge[MAC802154_HWSIM_EDGE_ATTR_MAX + 1];
> + unsigned int *ignore_idx = arg;
> + struct nlattr *nl_edge;
> + uint32_t idx, idx2;
> + uint8_t lqi = 0xff;
> + int rem_edge;
> + int rc;
> +
> + nla_parse(attrs, MAC802154_HWSIM_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
> + genlmsg_attrlen(gnlh, 0), NULL);
> +
> + if (!attrs[MAC802154_HWSIM_ATTR_RADIO_ID])
> + return NL_SKIP;
> +
> + idx = nla_get_u32(attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
> + if (idx == *ignore_idx)
> + return NL_SKIP;
> +
> + if (!attrs[MAC802154_HWSIM_ATTR_RADIO_EDGES])
> + return NL_SKIP;
> +
> + nla_for_each_nested(nl_edge, attrs[MAC802154_HWSIM_ATTR_RADIO_EDGES],
> + rem_edge) {
> + rc = nla_parse_nested(edge, MAC802154_HWSIM_EDGE_ATTR_MAX,
> + nl_edge, edge_policy);
> + if (rc)
> + return NL_SKIP;
> +
> + idx2 = nla_get_u32(edge[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID]);
> + if (idx2 == *ignore_idx)
> + continue;
> +
> + lqi = nla_get_u32(edge[MAC802154_HWSIM_EDGE_ATTR_LQI]);
> + printf("\t%" PRIu32 " -> %" PRIu32 "[label=%" PRIu8 "];\n",
> + idx, idx2, lqi);
> + }
> +
> + return NL_SKIP;
> +}
> +
> +static int nl_msg_cb(struct nl_msg* msg, void* arg)
> +{
> + static struct nla_policy edge_policy[MAC802154_HWSIM_EDGE_ATTR_MAX + 1] = {
> + [MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID] = { .type = NLA_U32 },
> + [MAC802154_HWSIM_EDGE_ATTR_LQI] = { .type = NLA_U8 },
> + };
> + struct nlmsghdr *nlh = nlmsg_hdr(msg);
> + struct genlmsghdr *gnlh = (struct genlmsghdr*) nlmsg_data(nlh);
> + struct nlattr *attrs[MAC802154_HWSIM_ATTR_MAX + 1];
> + struct nlattr *edge[MAC802154_HWSIM_EDGE_ATTR_MAX + 1];
> + unsigned int *ignore_idx = arg;
> + struct nlattr *nl_edge;
> + uint32_t idx;
> + uint8_t lqi;
> + int rem_edge;
> + int rc;
> +
> + nla_parse(attrs, MAC802154_HWSIM_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
> + genlmsg_attrlen(gnlh, 0), NULL);
> +
> + if (!attrs[MAC802154_HWSIM_ATTR_RADIO_ID])
> + return NL_SKIP;
> +
> + idx = nla_get_u32(attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
> +
> + if (idx == *ignore_idx)
> + return NL_SKIP;
> +
> + printf("wpan_hwsim radio%" PRIu32 ":\n", idx);
> +
> + if (!attrs[MAC802154_HWSIM_ATTR_RADIO_EDGES])
> + return NL_SKIP;
> +
> + nla_for_each_nested(nl_edge, attrs[MAC802154_HWSIM_ATTR_RADIO_EDGES],
> + rem_edge) {
> + rc = nla_parse_nested(edge, MAC802154_HWSIM_EDGE_ATTR_MAX,
> + nl_edge, edge_policy);
> + if (rc)
> + return NL_SKIP;
> +
> + idx = nla_get_u32(edge[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID]);
> +
> + if (idx == *ignore_idx)
> + continue;
> +
> + printf("\tedge:\n");
> + printf("\t\tradio%" PRIu32 "\n", idx);
> + lqi = nla_get_u32(edge[MAC802154_HWSIM_EDGE_ATTR_LQI]);
> + printf("\t\tlqi: 0x%02x\n", lqi);
> + }
> +
> + return NL_SKIP;
> +}
> +
> +static int hwsim_dump(bool dot, int unsigned ignore_idx)
> +{
> + struct nl_msg *msg;
> + int rc;
> +
> + nl_socket_modify_cb(nl_sock, NL_CB_VALID, NL_CB_CUSTOM,
> + dot ? nl_msg_dot_cb : nl_msg_cb, &ignore_idx);
> + msg = nlmsg_alloc();
> + if (!msg)
> + return -ENOMEM;
> +
> + genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, nlhwsim_id, 0, NLM_F_DUMP,
> + MAC802154_HWSIM_CMD_GET_RADIO, 0);
> +
> + if (dot)
> + printf("digraph {\n");
> +
> + rc = nl_send_sync(nl_sock, msg);
> + if (rc < 0)
> + return rc;
> +
> + if (dot)
> + printf("}\n");
> +
> + return rc;
> +}
> +
> +static int hwsim_del(uint32_t idx)
> +{
> + struct nl_msg *msg;
> + struct nl_cb *cb;
> + int err = 0;
> + int rc;
> +
> + cb = nl_cb_alloc(NL_CB_DEFAULT);
> + if (!cb)
> + return -ENOMEM;
> +
> + msg = nlmsg_alloc();
> + if (!msg) {
> + nl_cb_put(cb);
> + return -ENOMEM;
> + }
> +
> + genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, nlhwsim_id, 0, 0,
> + MAC802154_HWSIM_CMD_DEL_RADIO, 0);
> + nla_put_u32(msg, MAC802154_HWSIM_ATTR_RADIO_ID, idx);
> +
> + nl_cb_err(cb, NL_CB_CUSTOM, error_handler, &err);
> + rc = nl_send_auto(nl_sock, msg);
> + nl_recvmsgs(nl_sock, cb);
> + if (err < 0)
> + fprintf(stderr, "Failed to remove radio: %s\n", strerror(abs(err)));
> + nl_cb_put(cb);
> +
> + return rc;
> +}
> +
> +static int hwsim_cmd_edge(int cmd, uint32_t idx, uint32_t idx2, uint8_t lqi)
> +{
> + struct nlattr* edge;
> + struct nl_msg *msg;
> + struct nl_cb *cb;
> + int err = 0;
> + int rc;
> +
> + cb = nl_cb_alloc(NL_CB_DEFAULT);
> + if (!cb)
> + return -ENOMEM;
> +
> + msg = nlmsg_alloc();
> + if (!msg) {
> + nl_cb_put(cb);
> + return -ENOMEM;
> + }
> +
> + genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, nlhwsim_id, 0, 0,
> + cmd, 0);
> + nla_put_u32(msg, MAC802154_HWSIM_ATTR_RADIO_ID, idx);
> +
> + edge = nla_nest_start(msg, MAC802154_HWSIM_ATTR_RADIO_EDGE);
> + if (!edge) {
> + nl_cb_put(cb);
> + return -ENOMEM;
> + }
> +
> + nla_put_u32(msg, MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID, idx2);
> + if (cmd == MAC802154_HWSIM_CMD_SET_EDGE)
> + nla_put_u8(msg, MAC802154_HWSIM_EDGE_ATTR_LQI, lqi);
> +
> + nla_nest_end(msg, edge);
> +
> + nl_cb_err(cb, NL_CB_CUSTOM, error_handler, &err);
> + rc = nl_send_auto(nl_sock, msg);
> + nl_recvmsgs(nl_sock, cb);
> + if (err < 0)
> + fprintf(stderr, "Failed to add or remove edge: %s\n", strerror(abs(err)));
> + nl_cb_put(cb);
> +
> + return rc;
> +}
> +
> +static int hwsim_do_cmd(uint32_t cmd, unsigned int idx, unsigned int idx2,
> + uint8_t lqi, bool dot, unsigned int ignore_idx)
> +{
> + int rc;
> +
> + rc = nlhwsim_init();
> + if (rc)
> + return 1;
> +
> + switch (cmd) {
> + case MAC802154_HWSIM_CMD_GET_RADIO:
> + rc = hwsim_dump(dot, ignore_idx);
> + break;
> + case MAC802154_HWSIM_CMD_DEL_RADIO:
> + rc = hwsim_del(idx);
> + break;
> + case MAC802154_HWSIM_CMD_NEW_RADIO:
> + rc = hwsim_create();
> + break;
> + case MAC802154_HWSIM_CMD_NEW_EDGE:
> + case MAC802154_HWSIM_CMD_DEL_EDGE:
> + case MAC802154_HWSIM_CMD_SET_EDGE:
> + rc = hwsim_cmd_edge(cmd, idx, idx2, lqi);
> + break;
> + default:
> + rc = -EINVAL;
> + break;
> + }
> +
> + nlhwsim_cleanup();
> +
> + return rc;
> +}
> +
> +static void print_usage(void)
> +{
> + printf("wpan_hwsim [OPTION...] [CMD...]\n");
> + printf("\n");
> + printf(" possible options:\n");
> + printf(" -h, --help show this help\n");
> + printf(" -v, --version show version\n");
> + printf(" -d, --dot dump topology as dot format\n");
> + printf(" -i, --ignore filter one node from dump (useful for virtual monitors)\n");
> + printf("\n");
> + printf(" possible commands:\n");
> + printf(" add add new hwsim radio\n");
> + printf(" del IDX del hwsim radio according idx\n");
> + printf(" edge add IDX IDX add edge between radios\n");
> + printf(" edge del IDX IDX delete edge between radios\n");
> + printf(" edge lqi IDX IDX LQI set lqi value for a specific edge\n");
> + printf("\n");
> + printf(" To dump all node information just call this program without any command\n");
> +}
> +
> +static void print_version(void)
> +{
> + printf(PACKAGE_VERSION "\n");
Maybe the tool name as well?
printf("wpan-hwsim " PACKAGE_VERSION "\n");
> +}
> +
> +int main(int argc, const char *argv[])
> +{
> + unsigned long int idx, idx2, lqi, ignore_idx = ULONG_MAX;
> + bool dot = false;
> + int cmd;
> + int rc;
> + int c;
> +
> + while (1) {
> + int option_index = 0;
> + static struct option long_options[] = {
> + {"help", required_argument, 0, 'h' },
> + {"version", required_argument, 0, 'v' },
help and version both do not need an argument, please use no_argument
for these two.
> + {"dot", required_argument, 0, 'd' },
> + {"ignore", required_argument, 0, 'i' },
> + {0, 0, 0, 0 }
> + };
> +
> + c = getopt_long(argc, (char **)argv, "vhdi:",
> + long_options, &option_index);
> + if (c == -1)
> + break;
> +
> + switch (c) {
> + case 'v':
> + print_version();
> + return EXIT_SUCCESS;
> + case 'h':
> + print_usage();
> + return EXIT_SUCCESS;
> + case 'd':
> + dot = true;
> + break;
> + case 'i':
> + ignore_idx = strtoul(optarg, NULL, 0);
> + if (ignore_idx == ULONG_MAX) {
> + fprintf(stderr, "Invalid radio index for ignore argument\n");
> + return EXIT_FAILURE;
> + }
> + break;
> + default:
> + print_usage();
> + return EXIT_FAILURE;
> + }
> + }
> +
> + if (optind + 1 > argc) {
> + rc = hwsim_do_cmd(MAC802154_HWSIM_CMD_GET_RADIO, 0, 0, 0, dot,
> + ignore_idx);
> + if (rc < 0)
> + return EXIT_FAILURE;
> + else
> + goto out;
> + }
> +
> + if (!strncmp(argv[optind], "add", 3)) {
> + rc = hwsim_do_cmd(MAC802154_HWSIM_CMD_NEW_RADIO, 0, 0, 0, 0, 0);
> + if (rc < 0)
> + return EXIT_FAILURE;
> + } else if (!strncmp(argv[optind], "del", 3)) {
> + if (optind + 2 > argc) {
> + fprintf(stderr, "Missing radio index for delete\n");
> + return EXIT_FAILURE;
> + } else {
> + idx = strtoul(argv[optind + 1], NULL, 0);
> + if (idx == ULONG_MAX) {
> + fprintf(stderr, "Invalid radio index for delete\n");
> + return EXIT_FAILURE;
> + }
> +
> + rc = hwsim_do_cmd(MAC802154_HWSIM_CMD_DEL_RADIO, idx, 0, 0, 0, 0);
> + if (rc < 0)
> + return EXIT_FAILURE;
> + }
> + } else if (!strncmp(argv[optind], "edge", 4)) {
> + if (optind + 4 > argc) {
> + fprintf(stderr, "Missing edge radio index information\n");
> + return EXIT_FAILURE;
> + } else {
> + if (!strncmp(argv[optind + 1], "add", 3)) {
> + cmd = MAC802154_HWSIM_CMD_NEW_EDGE;
> + } else if (!strncmp(argv[optind + 1], "del", 3)) {
> + cmd = MAC802154_HWSIM_CMD_DEL_EDGE;
> + } else if (!strncmp(argv[optind + 1], "lqi", 3)) {
> + cmd = MAC802154_HWSIM_CMD_SET_EDGE;
> + } else {
> + fprintf(stderr, "Invalid edge command\n");
> + return EXIT_FAILURE;
> + }
> +
> + if (cmd == MAC802154_HWSIM_CMD_SET_EDGE) {
> + if (optind + 5 > argc) {
> + fprintf(stderr, "LQI information missing\n");
> + return EXIT_FAILURE;
> + }
> +
> + lqi = strtoul(argv[optind + 4], NULL, 0);
> + if (lqi == ULONG_MAX || lqi > 0xff) {
> + fprintf(stderr, "Invalid lqi value\n");
> + return EXIT_FAILURE;
> + }
> + }
> +
> + idx = strtoul(argv[optind + 2], NULL, 0);
> + if (idx == ULONG_MAX) {
> + fprintf(stderr, "Invalid first radio index for edge command\n");
> + return EXIT_FAILURE;
> + }
> +
> + idx2 = strtoul(argv[optind + 3], NULL, 0);
> + if (idx2 == ULONG_MAX) {
> + fprintf(stderr, "Invalid second radio index for edge command\n");
> + return EXIT_FAILURE;
> + }
> +
> + rc = hwsim_do_cmd(cmd, idx, idx2, lqi, 0, 0);
> + if (rc < 0)
> + return EXIT_FAILURE;
> + }
> + } else {
> + fprintf(stderr, "Unknown command\n");
> + print_usage();
> + return EXIT_FAILURE;
> + }
> +
> +out:
> + return EXIT_SUCCESS;
> +}
>
Rest looks good to me.
regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
