From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
The arrays atusb_chip_data and hulusb_chip_data are local to the source
and do not need to be in global scope, so make them static. Also
remove unnecessary forward declaration of atusb_chip_data.
Cleans up sparse warnings:
symbol 'atusb_chip_data' was not declared. Should it be static?
symbol 'hulusb_chip_data' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
drivers/net/ieee802154/atusb.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 115fa3f37a86..8b0718de568f 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -45,8 +45,6 @@
#define ATUSB_ALLOC_DELAY_MS 100 /* delay after failed allocation */
#define ATUSB_TX_TIMEOUT_MS 200 /* on the air timeout */
-struct atusb_chip_data;
-
struct atusb {
struct ieee802154_hw *hw;
struct usb_device *usb_dev;
@@ -767,14 +765,14 @@ atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
return 0;
}
-struct atusb_chip_data atusb_chip_data = {
+static struct atusb_chip_data atusb_chip_data = {
.t_channel_switch = 1,
.rssi_base_val = -91,
.set_txpower = atusb_set_txpower,
.set_channel = atusb_set_channel,
};
-struct atusb_chip_data hulusb_chip_data = {
+static struct atusb_chip_data hulusb_chip_data = {
.t_channel_switch = 11,
.rssi_base_val = -100,
.set_txpower = hulusb_set_txpower,
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
