[PATCH v3 2/5] 6lowpan: Set MAC address lenght according to LOWPAN_LLTYPE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Patrik Flykt <patrik.flykt@xxxxxxxxxxxxxxx>

Set MAC address length according to the 6LoWPAN link layer in use.
Bluetooth Low Energy uses 48 bit addressing while IEEE802.15.4 uses
64 bits.

Signed-off-by: Patrik Flykt <patrik.flykt@xxxxxxxxxxxxxxx>
---
 net/6lowpan/core.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/net/6lowpan/core.c b/net/6lowpan/core.c
index 5945f7e..5f9909a 100644
--- a/net/6lowpan/core.c
+++ b/net/6lowpan/core.c
@@ -23,7 +23,16 @@ int lowpan_register_netdevice(struct net_device *dev,
 {
 	int i, ret;
 
-	dev->addr_len = EUI64_ADDR_LEN;
+	switch (lltype) {
+	case LOWPAN_LLTYPE_IEEE802154:
+		dev->addr_len = EUI64_ADDR_LEN;
+		break;
+
+	case LOWPAN_LLTYPE_BTLE:
+		dev->addr_len = ETH_ALEN;
+		break;
+	}
+
 	dev->type = ARPHRD_6LOWPAN;
 	dev->mtu = IPV6_MIN_MTU;
 	dev->priv_flags |= IFF_NO_QUEUE;
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux