Hello.
On 21/04/16 12:00, Stefan Schmidt wrote:
Hello.
On 20/04/16 20:55, Alexander Aring wrote:
Hi,
On 04/19/2016 04:28 PM, Stefan Schmidt wrote:
Catching up with the stack here and implement CSMA parameter setting.
Signed-off-by: Stefan Schmidt <stefan@xxxxxxxxxxxxxxx>
all patches are fine. I want to remember this settings have no effects
until atusb has TX_ARET support and drops basic operation mode.
But I am sure you already known that and this will part of next firmware
version.
Yes, thats what I'm working on right now.
Also please care of ed-levels if they are the same on at86rf230, don't
known yet. There is some calculation with rssi_base_val parameter which
is on 2.4 Ghz always -91.
I will have a look at the 230 ed level table and see if anything
special is needed for it when running atusb with the rzusb dongle.
I looked it up in the datasheets (231 on page 91ff and for 230 page 50ff).
Both have 85 ED levels in 1dB steps and the range is 0 - 84 on both as well.
Nothing I can see where 230 and 231 have any difference how we would
need to handle them.
regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
