Hi Alex, > I expierenced when setting channel while sleep mode it didn't changed > the channel inside the hardware registers. Then I got another report of > an user which has similar issues. > > I increased the sleep to off state change timing, which is according > at86rf233 at maximum 1000 us. After this change I got no similar effects > again. > > I tried another option to wait on AWAKE_END irq, which can be used to > wait until the transceiver is awaked. I tested it and the IRQ took 4 > seconds after starting state change. I don't believe it takes 4 seconds > to go into the TRX_OFF state from SLEEP state. The alternative is to > increase the timings which seems to work. > > Cc: Oleg Hahm <oliver.hahm@xxxxxxxx> > Signed-off-by: Alexander Aring <aar@xxxxxxxxxxxxxx> > --- > drivers/net/ieee802154/at86rf230.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) patch has been applied to bluetooth-next tree. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
