This patch replaces the spaces after define by a tab. Reviewed-by: Stefan Schmidt <stefan@xxxxxxxxxxxxxxx> Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx> --- drivers/net/ieee802154/mrf24j40.c | 76 +++++++++++++++++++-------------------- 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index 997724b..2b7fc00 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -23,46 +23,46 @@ #include <net/mac802154.h> /* MRF24J40 Short Address Registers */ -#define REG_RXMCR 0x00 /* Receive MAC control */ -#define REG_PANIDL 0x01 /* PAN ID (low) */ -#define REG_PANIDH 0x02 /* PAN ID (high) */ -#define REG_SADRL 0x03 /* Short address (low) */ -#define REG_SADRH 0x04 /* Short address (high) */ -#define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ -#define REG_TXMCR 0x11 /* Transmit MAC control */ -#define REG_PACON0 0x16 /* Power Amplifier Control */ -#define REG_PACON1 0x17 /* Power Amplifier Control */ -#define REG_PACON2 0x18 /* Power Amplifier Control */ -#define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ -#define REG_TXSTAT 0x24 /* TX MAC Status Register */ -#define REG_SOFTRST 0x2A /* Soft Reset */ -#define REG_TXSTBL 0x2E /* TX Stabilization */ -#define REG_INTSTAT 0x31 /* Interrupt Status */ -#define REG_INTCON 0x32 /* Interrupt Control */ -#define REG_GPIO 0x33 /* GPIO */ -#define REG_TRISGPIO 0x34 /* GPIO direction */ -#define REG_RFCTL 0x36 /* RF Control Mode Register */ -#define REG_BBREG1 0x39 /* Baseband Registers */ -#define REG_BBREG2 0x3A /* */ -#define REG_BBREG6 0x3E /* */ -#define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ +#define REG_RXMCR 0x00 /* Receive MAC control */ +#define REG_PANIDL 0x01 /* PAN ID (low) */ +#define REG_PANIDH 0x02 /* PAN ID (high) */ +#define REG_SADRL 0x03 /* Short address (low) */ +#define REG_SADRH 0x04 /* Short address (high) */ +#define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ +#define REG_TXMCR 0x11 /* Transmit MAC control */ +#define REG_PACON0 0x16 /* Power Amplifier Control */ +#define REG_PACON1 0x17 /* Power Amplifier Control */ +#define REG_PACON2 0x18 /* Power Amplifier Control */ +#define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ +#define REG_TXSTAT 0x24 /* TX MAC Status Register */ +#define REG_SOFTRST 0x2A /* Soft Reset */ +#define REG_TXSTBL 0x2E /* TX Stabilization */ +#define REG_INTSTAT 0x31 /* Interrupt Status */ +#define REG_INTCON 0x32 /* Interrupt Control */ +#define REG_GPIO 0x33 /* GPIO */ +#define REG_TRISGPIO 0x34 /* GPIO direction */ +#define REG_RFCTL 0x36 /* RF Control Mode Register */ +#define REG_BBREG1 0x39 /* Baseband Registers */ +#define REG_BBREG2 0x3A /* */ +#define REG_BBREG6 0x3E /* */ +#define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ /* MRF24J40 Long Address Registers */ -#define REG_RFCON0 0x200 /* RF Control Registers */ -#define REG_RFCON1 0x201 -#define REG_RFCON2 0x202 -#define REG_RFCON3 0x203 -#define REG_RFCON5 0x205 -#define REG_RFCON6 0x206 -#define REG_RFCON7 0x207 -#define REG_RFCON8 0x208 -#define REG_RSSI 0x210 -#define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ -#define REG_SLPCON1 0x220 -#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ -#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ -#define REG_TESTMODE 0x22F /* Test mode */ -#define REG_RX_FIFO 0x300 /* Receive FIFO */ +#define REG_RFCON0 0x200 /* RF Control Registers */ +#define REG_RFCON1 0x201 +#define REG_RFCON2 0x202 +#define REG_RFCON3 0x203 +#define REG_RFCON5 0x205 +#define REG_RFCON6 0x206 +#define REG_RFCON7 0x207 +#define REG_RFCON8 0x208 +#define REG_RSSI 0x210 +#define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ +#define REG_SLPCON1 0x220 +#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ +#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ +#define REG_TESTMODE 0x22F /* Test mode */ +#define REG_RX_FIFO 0x300 /* Receive FIFO */ /* Device configuration: Only channels 11-26 on page 0 are supported. */ #define MRF24J40_CHAN_MIN 11 -- 2.5.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
