On Thu, Aug 06, 2015 at 07:37:18PM +0200, Stefan Schmidt wrote:
> Hello.
>
> On 06/08/15 09:28, Alexander Aring wrote:
> >This patch introduce a new mib entry which isn't part of 802.15.4 but
> >useful as default behaviour to set the ack request bit or not if we
> >don't know if the ack request bit should set. This is currently used for
> >stacks like IEEE 802.15.4 6LoWPAN.
> >
> >Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx>
> >---
> > include/net/cfg802154.h | 5 +++++
> > include/net/nl802154.h | 4 ++++
> > net/ieee802154/6lowpan/tx.c | 2 +-
> > net/ieee802154/nl802154.c | 33 +++++++++++++++++++++++++++++++++
> > net/ieee802154/rdev-ops.h | 13 +++++++++++++
> > net/ieee802154/trace.h | 19 +++++++++++++++++++
> > net/mac802154/cfg.c | 11 +++++++++++
> > 7 files changed, 86 insertions(+), 1 deletion(-)
> >
> >diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h
> >index 382f94b..21353f8 100644
> >--- a/include/net/cfg802154.h
> >+++ b/include/net/cfg802154.h
> >@@ -63,6 +63,8 @@ struct cfg802154_ops {
> > s8 max_frame_retries);
> > int (*set_lbt_mode)(struct wpan_phy *wpan_phy,
> > struct wpan_dev *wpan_dev, bool mode);
> >+ int (*set_ackreq_default)(struct wpan_phy *wpan_phy,
> >+ struct wpan_dev *wpan_dev, bool ackreq);
> > };
> > static inline bool
> >@@ -193,6 +195,9 @@ struct wpan_dev {
> > bool lbt;
> > bool promiscuous_mode;
> >+
> >+ /* fallback for acknowledgment bit setting */
> >+ bool ackreq;
> > };
> > #define to_phy(_dev) container_of(_dev, struct wpan_phy, dev)
> >diff --git a/include/net/nl802154.h b/include/net/nl802154.h
> >index b0ab530..cf2713d 100644
> >--- a/include/net/nl802154.h
> >+++ b/include/net/nl802154.h
> >@@ -52,6 +52,8 @@ enum nl802154_commands {
> > NL802154_CMD_SET_LBT_MODE,
> >+ NL802154_CMD_SET_ACKREQ_DEFAULT,
> >+
> > /* add new commands above here */
> > /* used to define NL802154_CMD_MAX below */
> >@@ -104,6 +106,8 @@ enum nl802154_attrs {
> > NL802154_ATTR_SUPPORTED_COMMANDS,
> >+ NL802154_ATTR_ACKREQ_DEFAULT,
> >+
> > /* add attributes here, update the policy in nl802154.c */
> > __NL802154_ATTR_AFTER_LAST,
> >diff --git a/net/ieee802154/6lowpan/tx.c b/net/ieee802154/6lowpan/tx.c
> >index 2597abb..1bf4a30 100644
> >--- a/net/ieee802154/6lowpan/tx.c
> >+++ b/net/ieee802154/6lowpan/tx.c
> >@@ -224,7 +224,7 @@ static int lowpan_header(struct sk_buff *skb, struct net_device *dev)
> > } else {
> > da.mode = IEEE802154_ADDR_LONG;
> > da.extended_addr = ieee802154_devaddr_from_raw(daddr);
> >- cb->ackreq = wpan_dev->frame_retries >= 0;
> >+ cb->ackreq = wpan_dev->ackreq;
> > }
> > return dev_hard_header(skb, lowpan_dev_info(dev)->real_dev,
> >diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
> >index 68f2401..1b00a14 100644
> >--- a/net/ieee802154/nl802154.c
> >+++ b/net/ieee802154/nl802154.c
> >@@ -230,6 +230,8 @@ static const struct nla_policy nl802154_policy[NL802154_ATTR_MAX+1] = {
> > [NL802154_ATTR_WPAN_PHY_CAPS] = { .type = NLA_NESTED },
> > [NL802154_ATTR_SUPPORTED_COMMANDS] = { .type = NLA_NESTED },
> >+
> >+ [NL802154_ATTR_ACKREQ_DEFAULT] = { .type = NLA_U8 },
> > };
> > /* message building helper */
> >@@ -458,6 +460,7 @@ static int nl802154_send_wpan_phy(struct cfg802154_registered_device *rdev,
> > CMD(set_max_csma_backoffs, SET_MAX_CSMA_BACKOFFS);
> > CMD(set_max_frame_retries, SET_MAX_FRAME_RETRIES);
> > CMD(set_lbt_mode, SET_LBT_MODE);
> >+ CMD(set_ackreq_default, SET_ACKREQ_DEFAULT);
> > if (rdev->wpan_phy.flags & WPAN_PHY_FLAG_TXPOWER)
> > CMD(set_tx_power, SET_TX_POWER);
> >@@ -656,6 +659,10 @@ nl802154_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flags,
> > if (nla_put_u8(msg, NL802154_ATTR_LBT_MODE, wpan_dev->lbt))
> > goto nla_put_failure;
> >+ /* ackreq default behaviour */
> >+ if (nla_put_u8(msg, NL802154_ATTR_ACKREQ_DEFAULT, wpan_dev->ackreq))
> >+ goto nla_put_failure;
> >+
> > genlmsg_end(msg, hdr);
> > return 0;
> >@@ -1042,6 +1049,24 @@ static int nl802154_set_lbt_mode(struct sk_buff *skb, struct genl_info *info)
> > return rdev_set_lbt_mode(rdev, wpan_dev, mode);
> > }
> >+static int
> >+nl802154_set_ackreq_default(struct sk_buff *skb, struct genl_info *info)
> >+{
> >+ struct cfg802154_registered_device *rdev = info->user_ptr[0];
> >+ struct net_device *dev = info->user_ptr[1];
> >+ struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
> >+ bool ackreq;
> >+
> >+ if (netif_running(dev))
> >+ return -EBUSY;
>
> I was not able to change ackreq_default on a running wpan0 interface
>
yes.
> root@raspberrypi:~/wpan-tools-0.4# iwpan wpan0 set ackreq_default 1
> command failed: Device or resource busy (-16)
>
> Which makes it impossible to change it per frame as you stated in the cover
> letter. I guess this should go.
>
yea, ehm I think everybody (including myself) is confused now.
The behaviour before was only indicated by max_frame_retries "-1" or
max_frame_retries above 0. Which means:
- NO ARET (transmit doesn't wait for ack) == (max_frame_retries = -1)
- ARET (transmit wait for ack, the ARET mechanism was used by using the
max_frame_retries >= 0 parameter, which is can only be done by
transceiver)
The max_frame_retries parameter is only changed when the interface was
down, this was meant by "it was not per frame handling", which ends in
some awkward behaviour because you can set the ack request bit in cases
where the user can define it (e.g. af_802154). For 6LoWPAN ackreq was
set now by (max_frame_retries >= 0) condition.
What we did now is to remove the (max_frame_retries = -1) value and let
the max_frame_retries configureable even it's ARET or NO ARET mode.
(Note this value is only a parameter for the ARET mode algorithm, so it
isn't used on NO ARET mode).
All transceiver drivers should now indicate by ack request bit if it
should going into ARET mode or NO ARET mode and this handling is per frame.
It hasn't nothing to do with the ackreq_default entry (Maybe I should be
more clear in the cover-letter).
What I always thought before is that the at86rf2xx transceivers and
going into TX_ARET_ON will indicate (ARET mode only), so it always waits
for an ack frame after transmit. -> Since RFCv5 I know this isn't true
you can check the this behaviour with my debugfs patches. The
transceiver will check on ackreq bit on his own and then wait for ack or
not.
This means the at86rf2xx transceivers can be run in TX_ARET_ON also in
TX_ON by setting ackreq bit always to false (doesn't wait for ack) and
min_be = 0 (disable CSMA handling). What we can't turn off is the CCA
handling (maybe you can disable it by choosing the lowest threshold for
energy above threshold "or"), but then it's the same mechanism like TX_ON.
Don't know now why we always turn into TX_ON mode by when NO ARET mode
when the transceiver decide on his own if ack request bit is set or not.
Maybe somebody also didn't saw that on the first sight at the datasheet
and never looked back how TX_ARET_ON is working. (The name is also
really confused).
Now to your question:
We can change it that we allow to this value during ifup.
The question is here if we want a "clean" change to this value.
While changing this parameter, there could be frames in netdev queues
which are still pending. This will only affects then new frames which
comming into this queue.
The simplest way would again to do this handling when ifdown. I know I
do this if (!netif_running(dev)) too many and maybe it also doesn't
matter a "clean" locking to changing this parameter because we doesn't
care then if this bit is set for 4-7 frames when we set it. If you want
I can change it.
- Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
