Hello.
On 06/08/15 09:28, Alexander Aring wrote:
This patch changes the default minimum value of frame_retries to 0 and
changes the frame_retries default value to 3 which is also 802.15.4
default.
We don't use the frame_retries "-1" value as indicator for no-aret mode
anymore, instead we checking on the ack request bit inside the 802.15.4
frame control field. This allows a acknowledge handling per frame. This
checking is done by transceiver or inside xmit callback of driver layer.
If a transceiver doesn't support ARET handling the transmit
functionality ignores ack frames then, which isn't well but should not
effect anything of current functionality.
Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx>
---
net/mac802154/iface.c | 3 +--
net/mac802154/main.c | 9 +++------
2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 416de90..8837c5a 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -483,8 +483,7 @@ ieee802154_setup_sdata(struct ieee802154_sub_if_data *sdata,
wpan_dev->min_be = 3;
wpan_dev->max_be = 5;
wpan_dev->csma_retries = 4;
- /* for compatibility, actual default is 3 */
- wpan_dev->frame_retries = -1;
+ wpan_dev->frame_retries = 3;
wpan_dev->pan_id = cpu_to_le16(IEEE802154_PANID_BROADCAST);
wpan_dev->short_addr = cpu_to_le16(IEEE802154_ADDR_BROADCAST);
diff --git a/net/mac802154/main.c b/net/mac802154/main.c
index 9e55431..e8cab5b 100644
--- a/net/mac802154/main.c
+++ b/net/mac802154/main.c
@@ -111,7 +111,7 @@ ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops)
phy->supported.max_minbe = 8;
phy->supported.min_maxbe = 3;
phy->supported.max_maxbe = 8;
- phy->supported.min_frame_retries = -1;
+ phy->supported.min_frame_retries = 0;
phy->supported.max_frame_retries = 7;
phy->supported.max_csma_backoffs = 5;
phy->supported.lbt = NL802154_SUPPORTED_BOOL_FALSE;
@@ -177,11 +177,8 @@ int ieee802154_register_hw(struct ieee802154_hw *hw)
}
if (!(hw->flags & IEEE802154_HW_FRAME_RETRIES)) {
- /* TODO should be 3, but our default value is -1 which means
- * no ARET handling.
- */
- local->phy->supported.min_frame_retries = -1;
- local->phy->supported.max_frame_retries = -1;
+ local->phy->supported.min_frame_retries = 3;
+ local->phy->supported.max_frame_retries = 3;
}
if (hw->flags & IEEE802154_HW_PROMISCUOUS)
Reviewed-by: Stefan Schmidt<stefan@xxxxxxxxxxxxxxx>
regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
