Hello.
On 24/07/15 15:01, Alexander Aring wrote:
If we currently change the mac address inside the wpan interface while
we have a lowpan interface on top of the wpan interface, the mac address
setting doesn't reach the lowpan interface. The effect would be that the
IPv6 lowpan interface has the old SLAAC address and isn't working
anymore because the lowpan interface use in internal mechanism sometimes
dev->addr which is the old mac address of the wpan interface.
This patch checks if a wpan interface belongs to lowpan interface, if
yes then we need to check if the lowpan interface is down and change the
mac address also at the lowpan interface. When the lowpan interface will
be set up afterwards, it will use the correct SLAAC address which based
on the updated mac address setting.
Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx>
Reviewed-by: Stefan Schmidt <stefan@xxxxxxxxxxxxxxx>
I have a bit trouble testing it though. With iwpan we only allow to set
the short address while the extended address is set during device
registration. Removing this device also removes the connected lowpan
device so I wonder where we would run into this problem. Patch is fine
in any case but having this in my test script would allow me to check
for regressions on this one.
regards
Stefan Schmidt
---
net/mac802154/iface.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 416de90..346c160 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -132,6 +132,20 @@ static int mac802154_wpan_mac_addr(struct net_device *dev, void *p)
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
sdata->wpan_dev.extended_addr = extended_addr;
+ /* update lowpan interface mac address when
+ * wpan mac has been changed
+ */
+ if (sdata->wpan_dev.lowpan_dev) {
+ /* lowpan need to be down for update
+ * SLAAC address after ifup
+ */
+ if (netif_running(sdata->wpan_dev.lowpan_dev))
+ return -EBUSY;
+
+ memcpy(sdata->wpan_dev.lowpan_dev->dev_addr, dev->dev_addr,
+ dev->addr_len);
+ }
+
return mac802154_wpan_update_llsec(dev);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
