Fixed some codeing style issues.
Signed-off-by: hmsjwzb<hmsjwzb56@xxxxxxxxx>
---
drivers/net/ieee802154/mrf24j40.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index fba2dfd..d35c7a0 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -235,9 +235,9 @@ static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
};
/* Range check the length. 2 bytes are used for the length fields.*/
- if (length > TX_FIFO_SIZE-2) {
+ if (length > TX_FIFO_SIZE - 2) {
dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n");
- length = TX_FIFO_SIZE-2;
+ length = TX_FIFO_SIZE - 2;
}
spi_message_init(&msg);
@@ -290,9 +290,9 @@ static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec,
/* Range check the RX FIFO length, accounting for the one-byte
* length field at the beginning. */
- if (rx_len > RX_FIFO_SIZE-1) {
+ if (rx_len > RX_FIFO_SIZE - 1) {
dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n");
- rx_len = RX_FIFO_SIZE-1;
+ rx_len = RX_FIFO_SIZE - 1;
}
if (rx_len > *len) {
@@ -302,7 +302,7 @@ static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec,
}
/* Set up the commands to read the data. */
- cmd = MRF24J40_READLONG(REG_RX_FIFO+1);
+ cmd = MRF24J40_READLONG(REG_RX_FIFO + 1);
addr[0] = cmd >> 8 & 0xff;
addr[1] = cmd & 0xff;
data_xfer.len = rx_len;
@@ -402,7 +402,7 @@ static int mrf24j40_start(struct ieee802154_hw *hw)
ret = read_short_reg(devrec, REG_INTCON, &val);
if (ret)
return ret;
- val &= ~(0x1|0x8); /* Clear TXNIE and RXIE. Enable interrupts */
+ val &= ~(0x1 | 0x8); /* Clear TXNIE and RXIE. Enable interrupts */
write_short_reg(devrec, REG_INTCON, val);
return 0;
@@ -419,7 +419,7 @@ static void mrf24j40_stop(struct ieee802154_hw *hw)
ret = read_short_reg(devrec, REG_INTCON, &val);
if (ret)
return;
- val |= 0x1|0x8; /* Set TXNIE and RXIE. Disable Interrupts */
+ val |= 0x1 | 0x8; /* Set TXNIE and RXIE. Disable Interrupts */
write_short_reg(devrec, REG_INTCON, val);
}
@@ -436,7 +436,7 @@ static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
WARN_ON(channel > MRF24J40_CHAN_MAX);
/* Set Channel TODO */
- val = (channel-11) << 4 | 0x03;
+ val = (channel - 11) << 4 | 0x03;
write_long_reg(devrec, REG_RFCON0, val);
/* RF Reset */
@@ -558,7 +558,7 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
}
/* Cut off the checksum */
- skb_trim(skb, len-2);
+ skb_trim(skb, len - 2);
/* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040,
* also from a workqueue). I think irqsafe is not necessary here.
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
