On Thu, Nov 6, 2014 at 5:54 PM, Alexander Aring <alex.aring@xxxxxxxxx> wrote: > Hi, > > On Thu, Nov 06, 2014 at 05:33:51PM +0100, Henning Rogge wrote: >> I had a look at the fakelb driver, >> >> if I understand it right it just "connect" the raw-frame side of >> multiple 6lowpan interfaces with each other, right? So it might be >> part of the solution... >> >> the other part should be similar to the tun.c driver... unfortunately >> the tun driver got quite complex from what I can see. >> > > do you use a 802.15.4 radio? Then maybe the serial driver is something > like that what you searching for. No, its not a 802.15.4 radio... its mostly layer 1 and some "listen before talk/ALOHA" media access. I can send it raw frames (with a few header fields) and get everything the radio receives via serial port. A friend of mine suggested looking into 6lowpan instead of writing my own fragmentation/IP-compression/... scheme. The radio is very slow, so I need something efficient. Henning Rogge -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
