This patch sets the reset state channels accoridng at86rf2xx datasheets.
We don't need to set the default page here which is zero on all chips.
Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx>
---
drivers/net/ieee802154/at86rf230.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 624080d..f68ebba 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1427,6 +1427,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
chip = "at86rf231";
lp->data = &at86rf231_data;
lp->hw->phy->channels_supported[0] = 0x7FFF800;
+ lp->hw->phy->current_channel = 11;
break;
case 7:
chip = "at86rf212";
@@ -1435,6 +1436,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
lp->hw->flags |= IEEE802154_HW_LBT;
lp->hw->phy->channels_supported[0] = 0x00007FF;
lp->hw->phy->channels_supported[2] = 0x00007FF;
+ lp->hw->phy->current_channel = 5;
} else {
rc = -ENOTSUPP;
}
@@ -1443,6 +1445,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
chip = "at86rf233";
lp->data = &at86rf233_data;
lp->hw->phy->channels_supported[0] = 0x7FFF800;
+ lp->hw->phy->current_channel = 13;
break;
default:
chip = "unkown";
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
