Hi,
On Sun, Oct 05, 2014 at 10:00:59PM +0100, Martin Townsend wrote:
> Hi Alex
> On 05/10/14 18:50, Alexander Aring wrote:
> >Hi Martin,
> >
> >On Wed, Oct 01, 2014 at 01:10:22PM +0100, Martin Townsend wrote:
> >>Currently there are a number of error paths in the lowpan_rcv function that
> >>free the skb before returning, the patch simplifies the receive path by
> >>ensuring that the skb is only freed from this function.
> >>
> >>Passing the skb from 6lowpan up to the higher layers is not a
> >>function of IPHC. By moving it out of IPHC we also remove the
> >>need to support error code returns with NET_RX codes.
> >I think we should split the movement of "passing skb to higher layer"
> >into a separate patch.
> Wasn't it separated in v1 patch series and you asked me to combine into one
> patch??
yea, I know but it's hard to review and we need some "bisectable" git history.
> >
> >>It also makes the lowpan_rcv function more extendable as we
> >>can support more compression schemes.
> >>
> >>With the above 2 lowpan_rcv is refactored so eliminate incorrect return values.
> >>
> >>Signed-off-by: Martin Townsend <martin.townsend@xxxxxxxxxx>
> >>---
> >> include/net/6lowpan.h | 9 +++--
> >> net/6lowpan/iphc.c | 92 ++++++++++++++++---------------------------
> >> net/bluetooth/6lowpan.c | 52 ++++++++++++++++--------
> >> net/ieee802154/6lowpan_rtnl.c | 66 ++++++++++++++++++++-----------
> >> 4 files changed, 117 insertions(+), 102 deletions(-)
> >>
> >>diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
> >>index d184df1..05ff67e 100644
> >>--- a/include/net/6lowpan.h
> >>+++ b/include/net/6lowpan.h
> >>@@ -374,10 +374,11 @@ lowpan_uncompress_size(const struct sk_buff *skb, u16 *dgram_offset)
> >> typedef int (*skb_delivery_cb)(struct sk_buff *skb, struct net_device *dev);
> >>-int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >>- const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
> >>- const u8 *daddr, const u8 daddr_type, const u8 daddr_len,
> >>- u8 iphc0, u8 iphc1, skb_delivery_cb skb_deliver);
> >>+int
> >>+lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >>+ const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
> >>+ const u8 *daddr, const u8 daddr_type, const u8 daddr_len,
> >>+ u8 iphc0, u8 iphc1);
> >> int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
> >> unsigned short type, const void *_daddr,
> >> const void *_saddr, unsigned int len);
> >>diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> >>index 142eef5..3888357 100644
> >>--- a/net/6lowpan/iphc.c
> >>+++ b/net/6lowpan/iphc.c
> >>@@ -171,37 +171,6 @@ static int uncompress_context_based_src_addr(struct sk_buff *skb,
> >> return 0;
> >> }
> >>-static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
> >>- struct net_device *dev, skb_delivery_cb deliver_skb)
> >>-{
> >>- struct sk_buff *new;
> >>- int stat;
> >>-
> >>- new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
> >>- GFP_ATOMIC);
> >>- kfree_skb(skb);
> >>-
> >>- if (!new)
> >>- return -ENOMEM;
> >>-
> >>- skb_push(new, sizeof(struct ipv6hdr));
> >>- skb_reset_network_header(new);
> >>- skb_copy_to_linear_data(new, hdr, sizeof(struct ipv6hdr));
> >>-
> >>- new->protocol = htons(ETH_P_IPV6);
> >>- new->pkt_type = PACKET_HOST;
> >>- new->dev = dev;
> >>-
> >>- raw_dump_table(__func__, "raw skb data dump before receiving",
> >>- new->data, new->len);
> >>-
> >>- stat = deliver_skb(new, dev);
> >>-
> >>- kfree_skb(new);
> >>-
> >>- return stat;
> >>-}
> >>-
> >> /* Uncompress function for multicast destination address,
> >> * when M bit is set.
> >> */
> >>@@ -332,10 +301,11 @@ err:
> >> /* TTL uncompression values */
> >> static const u8 lowpan_ttl_values[] = { 0, 1, 64, 255 };
> >>-int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >>- const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
> >>- const u8 *daddr, const u8 daddr_type, const u8 daddr_len,
> >>- u8 iphc0, u8 iphc1, skb_delivery_cb deliver_skb)
> >>+int
> >>+lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >>+ const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
> >>+ const u8 *daddr, const u8 daddr_type, const u8 daddr_len,
> >>+ u8 iphc0, u8 iphc1)
> >> {
> >> struct ipv6hdr hdr = {};
> >> u8 tmp, num_context = 0;
> >>@@ -348,7 +318,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> if (iphc1 & LOWPAN_IPHC_CID) {
> >> pr_debug("CID flag is set, increase header with one\n");
> >> if (lowpan_fetch_skb(skb, &num_context, sizeof(num_context)))
> >>- goto drop;
> >>+ return -EINVAL;
> >> }
> >> hdr.version = 6;
> >>@@ -360,7 +330,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> */
> >> case 0: /* 00b */
> >> if (lowpan_fetch_skb(skb, &tmp, sizeof(tmp)))
> >>- goto drop;
> >>+ return -EINVAL;
> >> memcpy(&hdr.flow_lbl, &skb->data[0], 3);
> >> skb_pull(skb, 3);
> >>@@ -373,7 +343,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> */
> >> case 2: /* 10b */
> >> if (lowpan_fetch_skb(skb, &tmp, sizeof(tmp)))
> >>- goto drop;
> >>+ return -EINVAL;
> >> hdr.priority = ((tmp >> 2) & 0x0f);
> >> hdr.flow_lbl[0] = ((tmp << 6) & 0xC0) | ((tmp >> 2) & 0x30);
> >>@@ -383,7 +353,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> */
> >> case 1: /* 01b */
> >> if (lowpan_fetch_skb(skb, &tmp, sizeof(tmp)))
> >>- goto drop;
> >>+ return -EINVAL;
> >> hdr.flow_lbl[0] = (skb->data[0] & 0x0F) | ((tmp >> 2) & 0x30);
> >> memcpy(&hdr.flow_lbl[1], &skb->data[0], 2);
> >>@@ -400,7 +370,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> if ((iphc0 & LOWPAN_IPHC_NH_C) == 0) {
> >> /* Next header is carried inline */
> >> if (lowpan_fetch_skb(skb, &hdr.nexthdr, sizeof(hdr.nexthdr)))
> >>- goto drop;
> >>+ return -EINVAL;
> >> pr_debug("NH flag is set, next header carried inline: %02x\n",
> >> hdr.nexthdr);
> >>@@ -412,7 +382,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> } else {
> >> if (lowpan_fetch_skb(skb, &hdr.hop_limit,
> >> sizeof(hdr.hop_limit)))
> >>- goto drop;
> >>+ return -EINVAL;
> >> }
> >> /* Extract SAM to the tmp variable */
> >>@@ -431,7 +401,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> /* Check on error of previous branch */
> >> if (err)
> >>- goto drop;
> >>+ return -EINVAL;
> >> /* Extract DAM to the tmp variable */
> >> tmp = ((iphc1 & LOWPAN_IPHC_DAM_11) >> LOWPAN_IPHC_DAM_BIT) & 0x03;
> >>@@ -446,7 +416,7 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> tmp);
> >> if (err)
> >>- goto drop;
> >>+ return -EINVAL;
> >> }
> >> } else {
> >> err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
> >>@@ -454,28 +424,26 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> pr_debug("dest: stateless compression mode %d dest %pI6c\n",
> >> tmp, &hdr.daddr);
> >> if (err)
> >>- goto drop;
> >>+ return -EINVAL;
> >> }
> >> /* UDP data uncompression */
> >> if (iphc0 & LOWPAN_IPHC_NH_C) {
> >> struct udphdr uh;
> >>- struct sk_buff *new;
> >> if (uncompress_udp_header(skb, &uh))
> >>- goto drop;
> >>+ return -EINVAL;
> >> /* replace the compressed UDP head by the uncompressed UDP
> >> * header
> >> */
> >>- new = skb_copy_expand(skb, sizeof(struct udphdr),
> >>- skb_tailroom(skb), GFP_ATOMIC);
> >>- kfree_skb(skb);
> >>-
> >>- if (!new)
> >>- return -ENOMEM;
> >>+ if (skb_headroom(skb) < sizeof(struct udphdr) + sizeof(hdr)) {
> >>+ int n = sizeof(struct udphdr) + sizeof(hdr);
> >For this also a separate for "check if we have enough headroom". This
> >has nothing to do with the errno fix. All patches should follow "keep it
> >short and simple" not doing too much in a patch, if you can separate it
> >then separate it. Then we have a better overview while reviewing and a
> >nice git commit history.
> >
> >Also this should be "if (skb_headroom(skb) < sizeof(struct udphdr))"
> >only, without the sizeof(hdr). Why you check also for space for ipv6
> >header here? This is part of transport header.
> If you are decompressing UDP header then you also have to decompress the IP
> Header below it. This would mean that 2 pskb_expand_head calls would be
> needed which could result in 2 data copies which seems a waste, why not just
> do it once?
> >>- skb = new;
> >>+ err = pskb_expand_head(skb, n, 0, GFP_ATOMIC);
> >>+ if (unlikely(err))
> >>+ return err;
> >>+ }
> >> skb_push(skb, sizeof(struct udphdr));
> >Here we add data for udphdr only. Then check only for headroom for
> >udphdr.
> >
> >> skb_reset_transport_header(skb);
> >>@@ -485,6 +453,13 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> (u8 *)&uh, sizeof(uh));
> >> hdr.nexthdr = UIP_PROTO_UDP;
> >>+ } else {
> >Now I see why you make "sizeof(struct udphdr) + sizeof(hdr)" Better
> >remove this else branch and then simple make:
> >
> >"if (skb_headroom(skb) < sizeof(hdr))", then we don't need to check this
> >above. This is a little bit confusing.
> See above, maybe a comment would help things?
> >
> >>+ if (skb_headroom(skb) < sizeof(hdr)) {
> >>+ err = pskb_expand_head(skb, sizeof(hdr), 0, GFP_ATOMIC);
> >>+
> >remove this whitespace.
> ok.
> >
> >>+ if (unlikely(err))
> >>+ return err;
> >>+ }
> >> }
> >> hdr.payload_len = htons(skb->len);
> >>@@ -499,11 +474,14 @@ int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
> >> raw_dump_table(__func__, "raw header dump", (u8 *)&hdr, sizeof(hdr));
> >>- return skb_deliver(skb, &hdr, dev, deliver_skb);
> >>+ skb_push(skb, sizeof(hdr));
> >Here is the push for sizeof(hdr) above we should _always_ check for
> >"(skb_headroom(skb) < sizeof(hdr))".
> The intention of the code is to ensure that there is enough headroom before
> this push. Maybe the following pseudocode helps :)
>
> IF UDP Hdr Compression
> ensure enough room for UDP Hdr and IPv6 Hdr
> make room for UDP Hdr (skb_push)
> decompress UDP Hdr
> ELSE
> ensure enough room for IPv6 Hdr
>
> make room for IPv6 Hdr (skb_push)
> decompress IPv6 Hdr
>
Yes I know what you doing here, this saves one us one allocation.
I thought about to combine always the length of skb_push with
pskb_expand_head head so it's easier "why" we do this here. But with
your solution we save a allocation.
I will try to add a "length" field for necessary space in next header
compression framework and do this "check and expand" transparent inside
of next header compression framework. I think this should be fine.
Then please leave this code as it is. I am always fine to remove
allocations in hotpaths.
>
> >
> >
> >The code is much similar for udphdr and hdr, here.... create a static
> >function in this file, then we have a generic function for this (this is
> >useful for other transport header when next header compression layer
> >comes mainline.
> >
> >protoype looks like:
> >
> >int skb_check_and_expand(struct sk_buff *skb, size_t len)
> >
> >should contain something like:
> >
> >if (skb_headroom(skb) < len)
> > do_expand_stuff(skb....);
> >
> >return 0;
> >
> >
> >>+ skb_reset_network_header(skb);
> >>+ skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
> >>-drop:
> >>- kfree_skb(skb);
> >>- return -EINVAL;
> >>+ raw_dump_table(__func__, "raw skb data dump before receiving",
> >>+ skb->data, skb->len);
> >>+
> >>+ return 0;
> >> }
> >> EXPORT_SYMBOL_GPL(lowpan_process_data);
> >>diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
> >>index 206b65c..adfd361 100644
> >>--- a/net/bluetooth/6lowpan.c
> >>+++ b/net/bluetooth/6lowpan.c
> >>@@ -230,36 +230,31 @@ static int process_data(struct sk_buff *skb, struct net_device *netdev,
> >> peer = peer_lookup_chan(dev, chan);
> >> read_unlock_irqrestore(&devices_lock, flags);
> >> if (!peer)
> >>- goto drop;
> >>+ return -EINVAL;
> >> saddr = peer->eui64_addr;
> >> daddr = dev->netdev->dev_addr;
> >> /* at least two bytes will be used for the encoding */
> >> if (skb->len < 2)
> >>- goto drop;
> >>+ return -EINVAL;
> >> if (lowpan_fetch_skb_u8(skb, &iphc0))
> >>- goto drop;
> >>+ return -EINVAL;
> >> if (lowpan_fetch_skb_u8(skb, &iphc1))
> >>- goto drop;
> >>+ return -EINVAL;
> >> return lowpan_process_data(skb, netdev,
> >> saddr, IEEE802154_ADDR_LONG, EUI64_ADDR_LEN,
> >> daddr, IEEE802154_ADDR_LONG, EUI64_ADDR_LEN,
> >>- iphc0, iphc1, give_skb_to_upper);
> >>-
> >>-drop:
> >>- kfree_skb(skb);
> >>- return -EINVAL;
> >>+ iphc0, iphc1);
> >> }
> >> static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
> >> struct l2cap_chan *chan)
> >> {
> >> struct sk_buff *local_skb;
> >>- int ret;
> >> if (!netif_running(dev))
> >> goto drop;
> >>@@ -280,12 +275,8 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
> >> local_skb->protocol = htons(ETH_P_IPV6);
> >> local_skb->pkt_type = PACKET_HOST;
> >>- skb_reset_network_header(local_skb);
> >>- skb_set_transport_header(local_skb, sizeof(struct ipv6hdr));
> >>-
> >> if (give_skb_to_upper(local_skb, dev) != NET_RX_SUCCESS) {
> >>- kfree_skb(local_skb);
> >>- goto drop;
> >>+ goto drop_local_skb;
> >> }
> >> dev->stats.rx_bytes += skb->len;
> >>@@ -294,15 +285,40 @@ static int recv_pkt(struct sk_buff *skb, struct net_device *dev,
> >> kfree_skb(local_skb);
> >> kfree_skb(skb);
> >> } else {
> >>+ int ret;
> >>+
> >>+ if (skb_cloned(skb)) {
> >why is this now here? Is this necessary, we don't have such thing
> >current mainline, if necessary make a separate patch for this or put it
> >in the right one.
> It's necessary as pskb_expand_head must have no references as you are
> potentially reallocating the data part of the skb. It's position is
> questionable but until other compression schemes are supported it will
> suffice.
> >
> >>+ struct sk_buff *new;
> >>+ int new_headroom = sizeof(struct ipv6hdr) +
> >>+ sizeof(struct udphdr);
> >>+
> >>+ new = skb_copy_expand(skb, new_headroom,
> >>+ skb_tailroom(skb), GFP_ATOMIC);
> >>+ if (!new)
> >>+ return -ENOMEM;
> >>+ consume_skb(skb);
> >>+ skb = new;
> >>+ }
> >>+
> >> switch (skb->data[0] & 0xe0) {
> >> case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */
> >>+
> >>+ ret = process_data(skb, dev, chan);
> >>+ if (ret < 0)
> >>+ goto drop;
> >>+
> >> local_skb = skb_clone(skb, GFP_ATOMIC);
> >> if (!local_skb)
> >> goto drop;
> >This looks a little bit confusing, I will look at this when you sperate
> >the patches. Again "move handling to upper layer" and the "check if
> >expand is necessary". Then I will look at this code for correct
> >"kfree_skb" and "consume_skb" calling. Hope this is okay, I need to
> >decrypt this code at first. :-)
> sorry, I didn't intend to writing confusing code, wait until you see the GHC
> patch :)
>
nono, please it's only confusing me because there are too much changes.
You didn't write confusing code.
> >
> >Sorry too much changes in one patch, we need to split this one. Also
> >base it on bluetooth-next, should be complicated to megre this stuff for
> >bluetooth with -next...
> >
> >- Alex
> If I'm going to base it on bluetooth-next then I think the best solution is
> to submit separate patches in stages
>
> 1) Checking for headroom and using pskb_expand_head for decompression:
> reason for patch: saves on copying the whole structure and there potentially
> might not be a copy especially if the driver allocates a larger buffer than
> needed knowing that it will be decompressed
>
> 2) Move delivery out of IPHC.
> reason: Ensures return value isn't a mish mash of error codes and NET_RX_
> codes, allows for better scalability as we don't have a requirement for
> decompression to pass the skb onto the next layer
>
> 3) Fix lowpan_rcv
> reason: Fix those pesky return value problems
>
ack. You can do that.
>
> Then I can go on to submit those 2 outstanding patches
> 4) Refactor lowpan_rcv to handle fragmented uncompressed IPv6 packets.
>
I'm very excited about that.
> 5) Rename process_data etc..
>
ok.
> I think this will help Jukka as my patch currently breaks their transmit
> code and we could see which part causes this. Also I'm really busy at the
> moment writing a QEMU virtual device to model our transceiver so we can get
> a virtual test bed working as well as a couple of other things so it would
> be better for me to concentrate on one patch at a time as time is something
> I don't have a lot of at the moment :)
>
So it takes some time now, or what do you mean here?
> Would you be happy with this? I know it means the bug fix happens third, but
> I think it will be better in the long run.
>
I am happy with this and indeed we should fix this issue fast.
- Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
