Hi, I own a RaspBee[1] Transceiver, that I wanted to use on the Raspberry Pi. On the wiki I noticed the page about the serial driver[2] which sounded promising. So I used the patch[3] with some small changes to make it work with the current net-next kernel and wrote my own firmware for the RaspBee[4]. The firmware uses the µRacoli library for I/O and network communication, so it should also work on other devices supported by the library. So my actual question is, why is the serial driver not part of net-next? Was it just never sent to the mailing list for review or are there any problems that need to be fixed first? Thanks, Thomas [1] http://www.dresden-elektronik.de/funktechnik/solutions/wireless-light-control/raspbee/?L=1 [2] http://linux-zigbee.sourceforge.net/cgi-bin/trac.cgi/wiki/SerialV1 [3] https://gist.github.com/jpizarrom/a07d833a124835e171c2 [4] https://github.com/kuehnelth/raspbee-linux802154 -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
