From: Johannes Berg <johannes.berg@xxxxxxxxx>
To achieve this, limit the number of retries to
31 (instead of 255) and use the three bits that
are then free for VHT flags.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
include/net/mac80211.h | 36 +++++++++++++++++++++++++++++++++---
net/mac80211/cfg.c | 41 ++++++++++++++++++++++++-----------------
2 files changed, 57 insertions(+), 20 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c846526..a183b5b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -499,9 +499,14 @@ enum mac80211_tx_control_flags {
* This is set if the current BSS requires ERP protection.
* @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
* @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is split
+ * into a higher 4 bits (Nss) and lower 4 bits (MCS number)
* @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
* Greenfield mode.
* @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
+ * @IEEE80211_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
+ * (80+80 isn't supported yet)
* @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
* adjacent 20 MHz channels, if the current channel type is
* NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
@@ -512,12 +517,15 @@ enum mac80211_rate_control_flags {
IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1),
IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
- /* rate index is an MCS rate number instead of an index */
+ /* rate index is an HT/VHT MCS instead of an index */
IEEE80211_TX_RC_MCS = BIT(3),
IEEE80211_TX_RC_GREEN_FIELD = BIT(4),
IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5),
IEEE80211_TX_RC_DUP_DATA = BIT(6),
IEEE80211_TX_RC_SHORT_GI = BIT(7),
+ IEEE80211_TX_RC_VHT_MCS = BIT(8),
+ IEEE80211_TX_RC_80_MHZ_WIDTH = BIT(9),
+ IEEE80211_TX_RC_160_MHZ_WIDTH = BIT(10),
};
@@ -560,10 +568,32 @@ enum mac80211_rate_control_flags {
*/
struct ieee80211_tx_rate {
s8 idx;
- u8 count;
- u8 flags;
+ u16 count:5,
+ flags:11;
} __packed;
+#define IEEE80211_MAX_TX_RETRY 31
+
+static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate,
+ u8 mcs, u8 nss)
+{
+ WARN_ON(mcs & ~0xF);
+ WARN_ON(nss & ~0x7);
+ rate->idx = (nss << 4) | mcs;
+}
+
+static inline u8
+ieee80211_rate_get_vht_mcs(const struct ieee80211_tx_rate *rate)
+{
+ return rate->idx & 0xF;
+}
+
+static inline u8
+ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
+{
+ return rate->idx >> 4;
+}
+
/**
* struct ieee80211_tx_info - skb transmit information
*
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 0b9de4f..5d30e5f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -370,31 +370,32 @@ static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy,
return 0;
}
-static void rate_idx_to_bitrate(struct rate_info *rate, struct sta_info *sta, int idx)
-{
- enum ieee80211_band band = ieee80211_get_sdata_band(sta->sdata);
-
- if (!(rate->flags & RATE_INFO_FLAGS_MCS) &&
- !(rate->flags & RATE_INFO_FLAGS_VHT_MCS)) {
- struct ieee80211_supported_band *sband;
- sband = sta->local->hw.wiphy->bands[band];
- rate->legacy = sband->bitrates[idx].bitrate;
- } else
- rate->mcs = idx;
-}
-
void sta_set_rate_info_tx(struct sta_info *sta,
const struct ieee80211_tx_rate *rate,
struct rate_info *rinfo)
{
rinfo->flags = 0;
- if (rate->flags & IEEE80211_TX_RC_MCS)
+ if (rate->flags & IEEE80211_TX_RC_MCS) {
rinfo->flags |= RATE_INFO_FLAGS_MCS;
+ rinfo->mcs = rate->idx;
+ } else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) {
+ rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS;
+ rinfo->mcs = ieee80211_rate_get_vht_mcs(rate);
+ rinfo->nss = ieee80211_rate_get_vht_nss(rate);
+ } else {
+ struct ieee80211_supported_band *sband;
+ sband = sta->local->hw.wiphy->bands[
+ ieee80211_get_sdata_band(sta->sdata)];
+ rinfo->legacy = sband->bitrates[rate->idx].bitrate;
+ }
if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+ if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
+ rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
+ if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
+ rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
- rate_idx_to_bitrate(rinfo, sta, rate->idx);
}
static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
@@ -2003,10 +2004,16 @@ static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
return err;
}
- if (changed & WIPHY_PARAM_RETRY_SHORT)
+ if (changed & WIPHY_PARAM_RETRY_SHORT) {
+ if (wiphy->retry_short > IEEE80211_MAX_TX_RETRY)
+ return -EINVAL;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
- if (changed & WIPHY_PARAM_RETRY_LONG)
+ }
+ if (changed & WIPHY_PARAM_RETRY_LONG) {
+ if (wiphy->retry_long > IEEE80211_MAX_TX_RETRY)
+ return -EINVAL;
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+ }
if (changed &
(WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
