Hi Daniel, On Sun, Oct 28, 2012 at 04:49:02PM +0100, Daniel Mack wrote: > On 26.10.2012 22:58, Daniel Mack wrote: > > [have to re-open this issue again] > > > > On 21.10.2012 16:16, Andrei Emeltchenko wrote: > >> I have the same board and see this problem sometimes. Reloading modules > >> might help, if not reboot always works :). > > > > I thought I solved this issue, but I can't reproduce the running version > > anymore unfortunately. It constantly fails with the error I described, > > even though the clock and all voltages etc are definitely stable. > > Ok, following up on my own writings: I solved this issue. It took me > awhile to figure out that the 88WSD8787 is really picky about the > clock/power sequencing. It really needs >= 1ms delay in the startup > phase, otherwise the firmware won't start up. So did you put delay in a marvell sdio driver? Best regards Andrei Emeltchenko > > So if anyone has this problem, make sure to care for that very detail. > > > > Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
