On Monday, October 29, 2012 05:39:28 PM Albert Pool wrote: > Can any of you help me identify the Realtek chip in this device so that the USB ID can be added to the right driver? > It's a 802.11n USB nano dongle from ISY. I only have the dongle for short time, so I may not be able to test it > myself if it takes some time. usb-devices and lsusb -v output is attached. Is it a ISY IWL 2000 device? Then it could be supported by rtl8192cu: <http://forum.ubuntuusers.de/topic/isy-iwl-2000-n150-standard-wird-nicht-erkannt/#post-4641162> Note: you'll have to have to correct firmware in place as well. Either you have to install a realtek firmware package (rtlwifi) for your distro... Or download it manually (filename: rtlwifi/rtl8192cufw.bin <http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git>) and put it into the correct place (/lib/firmware/(rtlwifi)) Regards, Chr --- diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 9970c2b..d4338fd 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -297,6 +297,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { /*=== Customer ID ===*/ /****** 8188CU ********/ {RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ + {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
